Having problems with your HP Compaq Presario V2000 Notebook ?

My mother board in out side of the cabinet work properly but when i put in cabinet it do not work only start pc then hang..

Answers :

Dear Sir,
\015\012It seems to be problem with your cabinet,some circuits of mother board may contacting metal surface of your cabinet,it may cause malfunctioning of your motherboard.
\015\012So before putting the mother board in to the cabinet,use some bedding material like cellulose paper,it prevents contact of motherboard circuits to the cabinet surface.if also problem remain unsolved may be problem with *********** board shows problem when it stands vertically.
\015\012I think it helps,if you have any problem leave a feedback we were happy to assist you.
\015\012Good luck
Repair Help & Product Troubleshooting for HP Compaq Presario V2000 Notebook

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My mother board in out side of the cabinet work properly but when i put in cabinet it do not work only start pc then hang..

Dear Sir,\015\012\015\012It seems to be problem with your cabinet,some circuits of mother board may contacting metal surface of your cabinet,it may cause malfunctioning of your motherboard.\015\012So before puttin ... HP Compaq Presario V2000 Notebook

I can re boot boot my compaq persario V6000

Only a HDD with a properly installed OS, a valid boot sector and an active partition will 'Boot' Did\015\012it ever work? Are you sure the POWER is there. Are you sure the cables\015\012are on right and the HDD is identified in the BIOS o ... HP Compaq Presario V6000T PC Notebook

Poweredge1300 no post

Good news, you can save the machine, although it may take a while. There are a few ways to do this. If you are lucky enough that the boot sector of your BIOS didn't get corrupt and your computer still posts and you can put in a floppy. Then all you ... Dell PowerEdge 1300 Server

I'm having problems starting my desktop computer. After I push the power button, I hear the computer working but it doesn't fully com on. There's no display on the monitor and I continue to hear the computer working and working.

When you say you hear the computer working and working do you mean that the fans are going and the lights are on? \015\012 \015\012i ask this because the fans and power lights can come on just from the powe ... PC Desktops

COMPAQ SPS-BD 1394 Motherboard - replacing microprocessor and memory

I normally ask for more information when people post problems but I can't even be bothered to go through all this driver to get to the root of your problem. Cut out the c**p and give the necessary.\015\012\015\012As a former tech, you should know wha ... Compaq Presario 5000 PC Desktop

COMPAQ SPS-BD 1394 Motherboard - replacing microprocessor / cannibalizing into a Compaq Presario S5010NX, Prod. # DN032A-ABA, with a 2.5GHz Celeron w/ virtual memory problem. Details below

Hi dearwhy not make aconnection with another pc to other pc with crossing cable, you can sharing anything there, file ,printer...and allokecropp ... Compaq Presario 5000 PC Desktop

Power problem with LG L204WT Flatron

If your LG L204WT will not power up all of a sudden, or takes long to \012power up, or dies after a while and it has not been exposed to lightning\012 damage then in all likelihood the Electrolytic capacitors in its power \012supply has started to fa ... Philips 200S4SS (Silver) 20.1" LCD Monitor

Asus a6tc black screen

As what you have mentioned on behalf of that i will explain the problem.\015\012but before the explanation.This problem what you are facing is mostly due to faulty inverter board .but you mentioned that you checked it and its ok.If you are 100% ... ASUS PC Laptops

Laptop won't power up

As said by the engineer he is absolutely right that the mother board of the laptop is faulty.but directly saying that the mother board without any diagnosing is not fair.as it starts for 10seconds.but no boot.that means.either the chances of memory ( ... Dell Inspiron XPS M140 Notebook

My gateway g7-500 fails to start properly. Whemn power on I get a long beep followed by 2 short ones and the monitor screen remains black.

Cause:This issue can be caused by any of the below situations.\015\012 \015\012\015\012New hardware conflicting with old hardware.\015\012Bad or failing hardware device.\015\012 ... PC Desktops

My t2862 powerlight will not come on but a green led comes on on the main board, nothing else happens. I also disconnected the pwr sw,hdd led and pwr led plugs and don't know which pins they go on. Thanks

On the front panel header where the wires connect, there are two rows of 5 pins. The top row actually has 4 pins with the end one missing, and the bottom row has 5 pins. The first two pins on the top row are for the power LED. The next two pins are f ... E-Machines T2862 PC Desktop

I have a battery charging problem on my Gateway Solo1450 laptop. The battery is new and gave me 30 minutes of battery only run time after taht it would not charge. I set the commands (Enabled) in the BIOS but it did no good. Any suggestions? Thank you for your help Peter

Hi, if the battery is new then you need to start looking at things like the charger. If the old battery was used for a long time, and as they have only a few months life span then this puts extra work on the charger due to the fact that when the batt ... Gateway Solo 1450 Notebook

Dell xps m1530 formatted hdd now it wont boot

You might find part of this general trouble shooting process might help? Especially the part of changing you Primary Boot drive so you can load Windows.\012\012Assuming you are Windows based and not knowing your specific OS? \012 Your p ... Dell XPS M1530 Laptop

MSI board-no video or booting.

\015\012Clear the CMOS by moving the jumper one step aside which located near the CMOS battery for at least 30 seconds with power cord unplugged, then put it back again to its normal position.\015\012Enter B ... PC Desktops

Ma acer aspire 5738z does not start at all. the power on led nd the on/off buton light glows but the scree remains black. when i last left the comp i put it to sleep nd it went 2 sleep after installing new updates. now it doesnt respond after 5 hrs.only led light of power nd on off switch shows up..wat 2 do?

When you plug the DC power adapter and press on the power button, the laptop starts making normal noises, the LEDs work properly but noting appears on the screen. The laptop will not start.\015\012First of all, take a ... Acer Aspire 5735 Notebook

Toshiba A215 Password Removal

I had the same problem and could not find the pictures either. I still figured it out, so here are more detailed instructions. Please use a combination of the previous instructions and mine. This worked for my computer, but I can't guarantee succe ... PC Laptops

Cpu fan stopps

Try to clear cmos with the jumper next to the mainboard battery\015\012\015\012hit delete enter setup bios and save changes\015\012\015\012chek if the main board is not in unapropriate contact with the metal case.\015\01 ... PC Desktops

Gateway GT4022 has issues powering up and restarting

1.Yes the Power On switch is okay. (PS. If you hold down the Power On button for 10 seconds on any computer, it will turn off)2.The heatsink held down by springs on the Northbridge, and Southbridge chipsets, is an excellent idea. Wo ... Gateway GT4022 PC Desktop

Processor upgrade causes computer not to boot

Motherboard. http://www-304.ibm.com/systems/support/supportsite.wss/docdisplay?lndocid=MIGR-45692& ... IBM IntelliStation M Pro 6219 PC Desktop

I recently upraded my computer with an Asrock Penryn1600SLI-110dB motherboard with an Intel CORE 2 DUO E4600 processor. The symptoms are: When I tried to boot for the first time the cpu and case fans started but nothing else happened. The screen remained blank with no post check and the disk drives did not start. I replaced my old mother board back into the case and everything worked fine. I have de-installed the processor to check if I had done anything wrong it all looks OK to

Hi,If you have recently upgraded your motherboard and when you turn it on, there is no display. You could check the jumper setting of your motherboard.http://download.asrock.com/manual/PENRYN1600SLI-110DB.pdfCheck ... PC Desktops

Acer Aspire 3000 wont load past acer splash screen

I have an acer aspire 3000 i change the video settings on the bios setup to both from auto and know im getting a black screen any help???both internal and external blank.... ... Acer Aspire 3000 Notebook

Xion II Silver ATX Mid-Tower Case

There can be several causes for your problem.\015\012So I will walk you through checking the most likely causes.\015\012\015\012If you have the manual for your Motherboard it will be useful for reference purposes, otherwise you can ... XION II Mercury (XON102) ATX Mid-Tower Case

I have a virus on my computer Toshiba Satellite

You're going to need a few bits before you start:\0121) Drivers:  Start here:http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp...and download a complete set of drivers for the operating system yo ... Toshiba Satellite Pro A200-EZ2204X Notebook

Wont go to normal start up screen!!!

The screen that you're seeing is the self-test of the monitor, as it's already stated. It's commonly caused by having no signal coming from the computer to the monitor. You were advised to check the monitor cable, if you have already done that, then ... E-Machines eView 17f3 17" Flat CRT Monitor

Replaced the psu on a sony vaio pcv-54rg the board gets power due to light coming on, but will not start when i push the button to start the computer. put the old psu back in and the unit will start up just fine, when i hit the start switch. what is the deal with the new psu??why won't the new one work in it, it gets power, but the switch(on the front of the sony for on and off) doesn't seem to work with the new psu, but it does for the old one. any ideas on what may be wrong??

Not the correct psu not enough power being supplied or possibly to much power got a volt meter and do you know how to properly use on. ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9717 seconds