Having problems with your HP Compaq nx7010 Notebook ?
EMachines T1840 mother board crash
\015 Hello guys i have a emachine T1840 the mother board crash the hard drive still in very good conditions. if i use this hard drive with a different board would it boot up correctly?. if not is there a way i can do this because i have programs that i dont wan to loose.\015
If its the same model yes it will work, if not then depends its got to to be the same bios, same chip and same chipset.
You need to get hold of a boot CD - BartPE is great for this. Put the hard drive in another computer, and you'll find it more than likely blue screens, as the Drive Controller Drivers don't match the motherboard. Run a program called FIX-IDE, reboot, and it should at least boot. You might find that all sorts of other bits don't work though, but your apps should. Download the drivers for the new board and you should be off and away.
Repair Help & Product Troubleshooting for HP Compaq nx7010 Notebook
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
EMachines T1840 mother board crash
If its the same model yes it will work, if not then depends its got to to be the same bios, same chip and same chipset. ... HP Compaq nx7010 Notebook
Emachine t1840 wiring diagram power switch wire to mother board ?
Because there are so many different case and motherboard combinations\015\012sometimes it can be difficult following the instructions for connecting\015\012the front panel, USB header and audio header.\015\012\015\012Below is a few generi ... PC Desktops
Emachine will not power up
By nothing else, from a technical standpoint this would mean literally nothing, the CPU fan, power supply fan, aux fan, disk drive not spinning up, etc. My experience with EMachines is their motherboards aint the best, have been known to take out har ... E-Machines eMachines Desktop PC
EMachine T3406 wont boot
Is there a post beep when the pc is switched on. check the memory if it is a beep beep beep sound , also disconect the hard drive, dvd drive, floppy, and any usb devices and see if it boots up. if that fails it does seem like the mother board, also c ... E-Machines eMachines Desktop PC
Emachines problem... PSU works but comp doesnt turn on
Hi,\015\012I don't want to tell you a color because it could be different than the actual. Look at the front of the computer and trace the wire that goes to the switch and follow it to the mother board. If you have a volt meter you could measure the ... E-Machines eMachines Desktop PC
THE SCREEN SMEARS NAD SHUTS DOWN
Hi eakesj:A number of things here should be checked.First shut down and remove all cards, and power connections to all the drives such as cdroms, hard drives. The power supply should also be looked at and tested for correct voltage ... eMachines T6534 PC Desktop
Can not find heat sink switches on motherboard emachine t2862
Heat sink switches? I have to assume that you're talking about a dead mother board but the fans and the LED on the mother board are OK? This is a classic eMachines problem. Their power supplies glitch and take out the mother board sometimes the po ... E-Machines eMachines Desktop PC
I have a Emachine desktop T6216 computer, that when i turn it on the fan comes on for about 5 seconds shuts off and power-up. Now when i turn it on the fan just runs and it doesn't power-up orupload
It is possible that the hard drive has crashed. If the power supply starts up but nothing else then it is either the mother board or the hard drive. If you take off the case and the CPU fan is spinning, then it is likely the hard drive. Your best bet ... PC Desktops
Power supply for Emachine
WhoDoctorK9 is right. You'll need the model number of the pc to pull up any schematics of the board. This is, however, how you solve this problem. Just google your model number and try to find a schematic of the board.If you can't find th ... E-Machines eMachines Desktop PC
Emachine desktop The computer worked fine one day and the next day when we went to turn it on it would not power up. The monitor comes on and on the monitor screen it said monitor working fine check hard drive. Well I can't check anything because the tower has no power. The light around the button doesn't come on and you can't hear any kind of fan starting. Called emachines and the only thing they could tell me was to change outlets, did that, turn power off (no power) leave unplugged for 3 minu
I understand that your cpu is not turning on and the repairer confirmed that it is the issue with the mother board. I suggest you to please check the smps fan spinning or not. If its spinning then then the issue could be with the mother board. If not ... E-Machines eMachines Desktop PC
DEAD MOTHER BOARD
In here..? ... Compaq Presario Notebook
Emachine W2646--lights blinking on keyboard,pwr lamp on speaker on,power button on tower YELLOW,NO response! unplugged several hours,now dead,as if unplugged! This happened overnight while shut off completely,no one touched.
If you have a Yellow light on power supply, chances are you have blown the power supply.\015\012Even with a PC unplugged in a Bad Storm, I have seen many PC's and Laptops with Supplies shoot.\015\012If you ... E-Machines eMachines Desktop PC
Ihave a emachines modelT2792 and have een told the mother board is no good as well as the power supplycan i get another mother board for this computer or is it too old to fix it is about 2 years old
Hello,\015\012\015\012when all some other parts are good maybe you can replace the the mother board and the power supply.\015\012\015\012you should find motherboard replacement that will fit to your processor and Memory. ... PC Desktops
Installed a new Optical Drive and require assistance in the wiring
What kind of optical drive? Is this a CD, DVD?, Blue ray,or an opto-ferro-magnetic floppy?Generally:1) External drive: ============ a) just power it up and connect it to the PC using an USB or ... PC Desktops
Power button on emachine t3882 have come loose
Look on the mother board,, with it on its side,, power button facing you.. On the Mobo look at the bottom left were all the other small plugs are. that come out of the face of the computer.. it should be marked PWB or SW ... E-Machines eMachines Desktop PC
Emachine t3112 only work in safe mode
You need to run the new hardware wizard as there are differnet drivers needed for the mb ... E-Machines T3112 (RBT3112) PC Desktop
Emachine solution thanks for taking the time to help me where is the memory stick located and what typeof motherboard do i buy do i use me serial number or model number to purchase the item you refered to ithink i can replace it as long as i know what I need and what price range do these items run should i just invest in a new desk top
I don't see the previous post. Why do you need to replace your memory and mother board? How old is the emachine? Some of the P1 and PII systems had mother boards riveted in. If it is older than a P4 it would be best to replace the computer. ... E-Machines eMachines Desktop PC
NO POWER TO THE MOTHER BOARD OF MY EMACHINE
The Wires goes on the motherboard, check your motherboard manual for reference ... E-Machines eMachines T3830 PC Desktop
Emachine D2880-No Power
Probably yes, the poiwer-source may be delivering "dirty" power (happens also when using a back-up generator, as in the power in the building goes out, or when used in an old RV, and the back-up kicks in) <--- is a safety feature to protect the CP ... E-Machines eMachines Desktop PC
Emachine T2958 will not turn on - has no power
Dear asksforhelp,\015\012\015\012As u have told that u have change the power cord then the second thing u can try that check the SMPS is it working or not to check this u have to know that where is the SMPS where u pluged in the power cor ... E-Machines (T2958) PC Desktop
Emachines W2888 will Not Start up
Most likely the system board has failed. If the power supply had blown it is not unusual for the subsequent spike to blow the system board. On the other hand it may have been the system board that failed and the PSU is ok. Emachine system boards are ... E-Machines eMachines Desktop PC
PC won't 4power on.
Failures in the motherboard, memory, or any installed card could cause that symptom. All I can suggest based on the above information is remove memory one piece at a time and retest, remove/reseat video card if you have one, and attempt to reset the ... Acer Aspire™ T180 PC Desktop
EMachine T1840 Will Not Boot
Well sounds like you are in quite a pickle. If the restore is not functioning properly you have one of a few options. Continue with the restore without backing up, take it to a computer specialist and have them back up your information and redo the ... E-Machines -T1840-CELERON-1.8GHz,40GB Desktop Computer System (1000000127)
Emachine t5026 does not appear to have any power, when you unplug the power cable from unit the ehaust fans breifly turn on, and light on mother board flickers, other than that sign of power Tried putting a dynex 400 watt ATX p/s in and light on mother board comes on but no other sign of power. Fan on p/s doesnt come on. any suggestions?
It is possible that the connection at the motherboard, from the power supply, is faulty. Even though the lights flicker and it seems as if there is power, the fact that it is flickering might mean that the connection to the m-board is not solidly at ... E-Machines T5026 PC Desktop
Emachine T1840 the hard drive WD400 40GB problem Ask me to Format
Try this software it is free to try and then if you see it recovered your data you can buy it in order to actually save it off...\015\012\015\012http://www.runtime.org/gdbnt.zip\015\012\015\012Hope this helps ... PC Desktops