Having problems with your HP Compaq FS 7550 17 in.CRT Conventional Monitor ?

"out of frequency range" message nothing works

\015 Get the "out of frequency range" message. have changed frequency in safe mode to 800x600 and it still repeats the same message. can't go any lower. it has worked fine for years and just now started with message\015

Answers :

Try booting to the ENABLE VGA mode off the F8 menu\015\012if you can get to the desktop and then you can go to display properties and see if you can reset the resolution to normal. If no go, try updating the video driver
Repair Help & Product Troubleshooting for HP Compaq FS 7550 17 in.CRT Conventional Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

"out of frequency range" message nothing works


Try booting to the ENABLE VGA mode off the F8 menu\015\012if you can get to the desktop and then you can go to display properties and see if you can reset the resolution to normal. If no go, try updating the video driver ... HP Compaq FS 7550 17 in.CRT Conventional Monitor

Chimei CMV 938D 'Out of range' error message only when using DVI Connector on specific resolution and color depth


I know this sounds obvious but- I had the same problem, and turns out the cord want plugged in quite properly at the back of the monitor. This may not fix every problem, but, I suggest you check the cord pligged in at the back of the monitor is firml ... Envision EN-7100e 17" Flat Panel LCD Monitor

An Out of range box


Frankr2327\015\012\015\012If you are getting this message this means that you are connecting a device to the monitor and/or a connection that is putting out a signal that is not supported but the monitor. You may also need to look at the ... Envision Computer Monitors

Intstalled starlogic moniter to PC and got error message


Hi,\015\012the "Out of Range" message usually appears when the video card is putting out a video resolution or frequency that the monitor isn't able to handle. You should reboot your computer and BEFORE the Windows screen shows up, press the F ... Computer Monitors

Re: Errors being experienced with the ACER ASPIRE 5100-5758, OS VISTA. Error dealing with BUS:06, DEVICE:04, FUNCTION:00 AND ON TO FUNCTION:03


Hi, Nice report. We don't see these too often. You've had quite a few tech inclined people on your machine. My first hunch was memory timings and that could still be the problem. However, there is also memory on the display ad ... Acer Aspire 5100 Notebook

HP L2035 OSD Lockout and DVI lockouts


Change micro switch in frount panel all ... HP L2035 20.10" LCD Monitor

My monitor is linked to an Apple minimac. The monitor says out of range and gives a V: frequency 9 8kHZ anf H. frequency 1 19 HZ what does this mean and how do I reset it?


The message that appeared in your monitor "out of range" and V: frequency 9 8kHZ anf H. frequency 1 19 HZ has something to do with the screen resolution. Meaning that the resolution set on the computer did not meet the required resolution of the moni ... Computer Monitors

Comp makes a buzz noise and wont show any start up


Suggest you,A) Look at the back of the computer at the Power Supply fan, and tell me if it's spinning. (Where the power cord plugs in, is the Power Supply)B) Open the computer case, look at the Processor fan, and tell me if it ... PC Desktops

I get a message, "Frequency out of range. Nothibng else. The menue and other buttons don't do anything. Nothing else shows. I swapped out the monitor and the new one works.


Problem on monitor frequency .\015\012Solve:restart again press alt+F4/F5 run VGA mode change monitor frequency only 60 hz apply and ok settimg 1024x768 color bit 32.\015\012thanks ... Princeton Digital VL1916 19" LCD Monitor

Relisys Monitor model TL528A - Plug it in, screen is blank panel light is yellow. push ON button and I get a 5 second message stating: OUT OF RANGE HS: 53.5 KHz VS: 84.8 HZ WORK RANGE HS 31.5-60 KHz VS: 56-75 Hz Then the screen goes blank and the panel light returns to yellow. What does this mean and can I repair it? I am pretty handy with electronic and mechanical repairs.


It normally means that you have connected the monitor to a computer whose resolution and frequency are beyond the range that this monitor are capable of.\015\012\015\012To fix this, you can do one of two things: reconnect the old monitor ... PC Desktops

No power, front panel light is always on


Run with the 4-pin ATX power cable unplugged? No, the power supply is just supplying power to the hardware components, that do not require much power. (Wattage) [Or the power supply doesn't have enough power now, due to a bad power rail, or mor ... PC Desktops

OSD + GNR 19M1 LCD screen


Seems that you have set the resolution on your graphics card to a\015\012setting higher than the maximum resolution supported by your monitor.Try\015\012to boot into Safe Mode & lower the resolution of your graphics\015\012card. If not poss ... GNR 19M1 19" LCD Monitor

I have a hp desktop model a1268c computer. after an update my computer srcreen says ''input not supported'' and the screen is blank. When the computer boots the F1 button ''setup'' works but the F10 button does not. After the computer goes past the XP screen then goes black with the message from above. The only screen I can see is setup.


> You needs to configure your scree resolutions and other parameters.> May be frequency rate doesn't supported by your old Monitor.> Just attach your desktop with different monitor and change parameter to lowest frequency range. ... Computer Monitors

Signal Out of Range message


... Scanport 17" LCD Monitor

Can VP171s work with Windows 95?


... ViewSonic VP171s 17" LCD Monitor

Compaq EVO 510 2.4GZ Motherboard Question


Motherboard was tested before shipping? Good. Want you to know I wasn't trying to be a smart aleck with my statement. I was trying to find out if the motherboard was removed from a computer, and the state of the motherboard was not ... Compaq Evo D510 Minitower (Open Box) (OB4700432011) PC Desktop

Monitor displays Msg. frequency out of range, screen is black


Start your computer and press the F8 when the manufacturer's logo screen is showing. This will bring you to the Windows startup menu. Pick "start in VGA mode" and windows will start up with video settings you monitor can handle. Then you can change y ... Compaq Computer Monitors

TV Tuner not tuning


G´day m8,\015\012you have to set the security on the laptop as you have set it on ther router, and this is, at the same time, your problem with tuning the TV card, as it has no connetion to the internet....\015\012\015\012 ... PC Desktops

Lg CRT monitor model 500g 17inch -out of frequency


First, you did a great job of explaining and starting to identify the problem. You also eliminated a few things that we would have tried along the way.\015\012PROBLEM DEFINITION: The real issue (as you may already know) appears that the operat ... Computer Monitors

CL51-15 USB Port Problem


I was hoping you can help me out guys, i have this laptop acer travelmate 290 and everything seem to be working properly. All the drivers and devices are installed and working fine(Audio, Display, Network, Wireless, PCMCIA......) except my 2 USB port ... ASI CL51-15 Notebook

Cannot get new Motherboard to boot up in Normal Mode


What u may have done is wwhen u were installing the new board, gave a static shock to the system...that will cause only the fans to come on and nothing more...this is a bad problem bc u cannot fix it...if u figure out something else is wrong, and it ... Gateway PC Desktops

Fujitsu c series labtop screen goes blank, the hooked up to a monitor, starts to work then says out of frequence and goes blank


The video resolution and/or frequency that's set in windows is not supported by the monitor you have plugged in. Restart the PC in VGA mode (hit F8 after the BIOS messages but before any Windows messages) and change the video settings to something ba ... Fujitsu LifeBook C6555 Notebook

At start up it displays a message "frequency out of range" please change the display mode to 1280 x 1024 with 60Hz, any idea why its doing this and how to solve this issue so i can log back on to wind


Ok you may do soluton #1 make monitor show windows start. then enter windows-->enter control panel --> display--> setting --> monitor -->\015\012choose the refrash frequency to lower stage (at least 60 Hz)\015\012until no m ... Princeton Digital VL1919 19" Monitor

Can't finish 1st page of wireless printing after anti-spy & anti-virus renewal


If i were you i would re-install windows on a brand new hard dive, it may have bad sectors ... Toshiba Satellite A105 Notebook

1005he can not connect to wireless internet. have another laptop and not having same issue.


Hmmm - are you able to connect to other networks? are you getting a "no connectivity" message? Is wireless not showing at all? If the latter, have you tried checking that wireless is enabled? You may have accidently turned it off by hitting F2 key ... ASUS Eee PC 1000HE Netbook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.5729 seconds