Having problems with your HP Compaq FS7600 17" CRT Monitor ?

Everything on the screen is blurry... not unreadable, but almost like there is a shadow behind everything.


Answers :

[u][b]LCD Monitor Shadow Effect[/b][/u]
\015\012This problem is best described as the LCD monitor "Shadow Effect".
The solution to this very simple. No software or hard ware changes required.
The cables that are connected to the LCD monitors are causing the problem. Its also called as electromagnetic noise or electrical noise.
[u][b]Solution: [/b][/u]Keep the two cables - (power cable and moitor display cable), that are connected to the LCD monitor as far away as possible with each other and also away from other electrical cables.
\015\012Thats it. Your shadow effect is fixed.
\015\012Thank you.
Separate your cables behind your computer. Move them so they aren't touching, problem solved. Easy, but true.
Repair Help & Product Troubleshooting for HP Compaq FS7600 17" CRT Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Everything on the screen is blurry... not unreadable, but almost like there is a shadow behind everything.


[u][b]LCD Monitor Shadow Effect[/b][/u]\015\012This problem is best described as the LCD monitor "Shadow Effect". The solution to this very simple. No software or hard ware changes required.The cables that are connected to the LCD m ... HP Compaq FS7600 17" CRT Monitor

Monitor display is blurry, with shadows and waves next to text


Jnanda,Could be one of two related situations both have to do with built up magnetic flux:!. If you have used the monitor for a significant amount of time and have never degaussed it that might be it.To fix: Go to where ... Dell E173FP 17" LCD Monitor

Desktop larger than screen


Is AGP enabled in the BIOS? ... Computer Monitors

Hp F 2105 MONITOR volume and sleep problem


... HP f2105 21" LCD Monitor

Laptop starting in safemode.


I have a toshiba satellite 200 pro,i had the same problem.Toshiba told me it was a problem with my registry,Microsoft told me it was an N-vidia graphics problem!! Toshiba then sent me an update which W.Defender refused to let me run until i overided ... Toshiba Satellite A135 Notebook

No visual display


It sounds like your graphics card is shot. If your graphics card is a dedicated graphics card, you might be able to get it fixed/replaced; if it is embedded, then you are probably going to have to buy a whole new display screen. ... IBM ThinkPad T40 2373 Notebook

HP Pavilion dv 9205 us tries to start up, screen stays black


THIS IS A LONG REPLY POST BE WARNED : HOWEVER IS LIKELY HELPFUL TO OTHERS WITH INTERMITTENT LCD / PORT ISSUES. MY STORY,... Hi all. Ok, i'm gonna chime in here on this. I have the HP DV9205us and i've returned my unit a total of three times. Ultimate ... HP Pavilion dv9205us Notebook

Text/picture shadow Recently I've noticed what appears to be a shadow appearing mostly with text but in some picture as well. It makes the screen look a little blurry. It's not bad but just enough to irritate me. Any suggestions?


Hi rustybob,I have a solution for ya, but there are a couple of variables that could be involved. I assume it's an LCD monitor? How many inches is the viewing area, and what model is it? When you look at an LCD monitor, you pay attention ... Gateway FPD2275W LCD Monitor

The screennn, keeps going blank!!!!


I have the exact same model, a 5610Z, and I have run up against just about every problem you can think of. There may be a simple solution, or may be more complex. The simple solution may be too obvious to think of, so make sure this isn't the culprit ... Acer Aspire 5610-4648 Notebook

DOWNLOADED PROGRAMS THAT WORKED FINE FOR YEARS NOW DONT


Am having intel processor ,pentium4,3ghz is not showing on the screen. l change with lntel processor ,pentiun 4, 2 ghz it show on the screen but restart it self never show on the screen. ... Intel (RK80532PG0881M) Pentium 4, 3 GHz Processor

I had a bottle of wine in my backpack with my laptop (yes im an idot) anyways, when I finally opened my backpack I realized a little bit of wine had spilled. I quickly got out my laptop and saw the the screen was dark and flickering..just like a light does before he goes out. Now everything works excpet that I cant see anything on screen. At an angle I can tell that many applications are up such as my instant messenger but its not very clear at all. Help!


If the screen is not lighting up but everything is still on the screen then consider yourself very lucky....it sounds like you have just lost the inverter that sits under the screen behind the screen bezel. This converter takes the low voltage from y ... Gateway MX6447 Notebook

Monitor comes on with Acer name and then the next screen reads 'no signal' and that is as far as I get. Everything is hooked up correctly.


If the monitor comes up with a no signal and it is hookup correctly, you have more than likely a bad connection behind the LCD.\015\012I would check all your connection points for bad or bent pins first.\015\012 ... Acer Computer Monitors

CL51-15 USB Port Problem


I was hoping you can help me out guys, i have this laptop acer travelmate 290 and everything seem to be working properly. All the drivers and devices are installed and working fine(Audio, Display, Network, Wireless, PCMCIA......) except my 2 USB port ... ASI CL51-15 Notebook

Replacing the hard drive


No problems, Al - been there, done that!Sorry to be slow responding, just signed on here.You need to go in from the top - undo the panel between the keyboard and the screen, not forgetting the screws behind the screen on the h ... Itronix GoBook IX250 Notebook

Computer Does not Boot correctly, Monitor is Black.


Very interesting...Might try the following...\015\012- Video. Yes, almost garuntee that it is either the video card/onboard or the cable. Look at the cable and cable connectors and see if one of the pins has been shoved in. This is common. O ... PC Desktops

My syncmaster 710n is not working. I get the box where it ses what resolution si the right one, but the syncmaster 710v works normaly. Does that means my 710n can't be repared anymore? Thanks


Not completely sure what you're saying. Here's what I got out of your problem:You have a Syncmaster 710n that displays a box saying the best resolution is _____ x _____, but your Syncmaster 710v doesn't show that message.The m ... Samsung SyncMaster 710N 17 in. Flat Panel LCD Monitor

How can I make fonts look good in an LCD monitor ?


The VGA connection should be fine; I have DVI and when I switched from analog, the difference was pretty minimal, to my eyes.Is it just the fonts that are blurry, or everything? If fonts only, then this almost certainly suggests that run ... LG Flatron L1750S 17" LCD Monitor

My screen resolution is not like it's supposed to be.


The native resolution of you monitor is 1440x900. If you previously had it set at a lower resolution (say 1280 x 720) the text would appear larger than it does now. You can change the appearance of internet explorer by using the Zoom function (Ctrl + ... Gateway FPD2275W LCD Monitor

'Shadows' behind all texts and images on the screen


[u][b]LCD Monitor Shadow Effect[/b][/u]\015\012This problem is best described as the LCD monitor "Shadow Effect". The solution to this very simple. No software or hard ware changes required.The cables that are connected to the LCD m ... Acer AL2016W 20" LCD Monitor

Monitor powers on for approx 8 secs then standby.Series of vertical stripes on panel but no image.Guessing the lcd is at fault?


When I applied the solution below, I go stripes when poorly reconnecting the logic board to the plate, and the plate ability to do it job can be effect by bits going on the inverter, wavely screen output etc. The lcd is an assembly kit inside have a ... iiyama ProLite E434S 17" LCD Monitor

Dell UltraScan P1110 flat-screen monitor BLURRY?


The button you pressed is the reset button and according to the documentaton "returns the monitor to factory defaults".\015\012\015\012Here's a link to the Dell support page for your monitor:\015\012\015\012 ... Computer Monitors

Acer 3000 Screen not working properly


This is most likely either a.) the connection to the LCD is falling out or b.) the screen itself is going bad.If you feel comfortable to tackle this job you can buy the LCD to replace:New LCD Screen: ... Acer Aspire 3000 Notebook

My laptop went to white screen every time when I on it. How to solve....my laptop -- aspire 4710z -- almost 2 years but it happened JUST it 4 mths.....


Hi..Your problem are related with my laptop problem, but i totally fix it with my own. From my experience I can tell that this problem may be related to the\015\012following:\015\0121. Loose connection between the video cable and th ... Acer Aspire 4720 Notebook

ViewSonic LCD Monitor Gone Crazy


Look for bad caps, see example here: http://s807.photobucket.com/albums/yy352/budm/Viewsonic%20VX2235W/ ... ViewSonic VX2235wm LCD Monitor

Maxtor One Touch Mini 4 external 160 Gb no longer recognized by computer. Any way to retrieve data? The disk still spins (I can feel it when I hold it in my hand), but the laptop (Windows XP) won't acknowledge it anymore. It's only a cuople months old, so I can get a new one, but even though THEIR device went bad, they want to charge me $1700 to restore data!!! Unbelievable!


Hello Ifurney,\015\012\015\012\015\012\015\012OK, this a long posting…\015\012\015\0121. There could be a problem with the USB cable. Try to replace the cable with\015\012another one and check.\015\012\015\0 ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8940 seconds