Having problems with your HP Compaq d530 CMT Intel Desktop PC - Intel Pentium 4 2.8GHz, 512MB DDR, 40GB HDD, DVD-ROM/CD-RW, Gi ?

Screen says mode not supported h:53.4khz v;84.ghz

\015 When I Connect my HP to my monitor I get this message; mode not supported H:53.4khz V:84.ghz\015\012What should I do.\015

Answers :

You should reboot your computer. Immediately after you see the BIOS splash screen (Dell, Acer, HP, etc...) start pressing the F8 key 2 times every second. If you're quick enough, you'll get the Windows boot menu. When you see the menu, select "VGA Mode". This will boot Windows with minimal video settings which are compatible with all modern monitors.
\015\012
\015\012Once Windows loads, right click on the desktop, select Properties, go to the Settings tab, and begin sliding the resolution bar up from 800x600 and clicking Apply. After each change, it'll ask you if you want to keep the settings. If you can still see the screen, click Yes. If you get to a setting where your monitor goes black and says "mode not supported", then wait 15 seconds and it'll revert to the last mode that worked. Leave it there.
\015\012
\015\012Here are some typical resolutions for monitors:
\015\012
\015\01217" = 1280x1024
\015\01219" = 1280x1024
\015\01219" widescreen = 1440x900
\015\01221" = 1600x1200
\015\01224" = 1920x1200
\015\012
\015\012Hope this helps!
Repair Help & Product Troubleshooting for HP Compaq d530 CMT Intel Desktop PC - Intel Pentium 4 2.8GHz, 512MB DDR, 40GB HDD, DVD-ROM/CD-RW, Gi

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Screen says mode not supported h:53.4khz v;84.ghz


You should reboot your computer. Immediately after you see the BIOS splash screen (Dell, Acer, HP, etc...) start pressing the F8 key 2 times every second. If you're quick enough, you'll get the Windows boot menu. When you see the menu, select "VGA ... HP Compaq d530 CMT Intel Desktop PC - Intel Pentium 4 2.8GHz, 512MB DDR, 40GB HDD, DVD-ROM/CD-RW, Gi

My computer begins to load windows, then after the screen with the windows logo and bars goes away my screen goes black.


Nine times out of ten if that's when your display stops, it's simply because your display settings are set to something that your monitor can't handle. Depending on what it's not supporting, some monitors respond by going black ... others just ... Dell Latitude D800 Notebook

RectangulaR box on my screen says: input not supported


If your monitor is displaying a message, that's good news: Your monitor is not shut. What the message is saying is that either the refresh rate frequency, or the resolution you have set your video card to on your pc/laptop, is too high for your LCD ... Acer AL1916W 19" LCD Monitor

I can press F8 and press reboot and the screen goes blank. How do I resolve the problem


First things first ... let's get you a bootable system.\015\012Boot in safe mode - press F8 when the Windows loader presents you with the\015\01230 second list of choices, and then select "Safe Mode" as your boot option.\015\012Righ ... Everex StepNote NC1500 Notebook

W17e says "input not supported"


Hi - here's what I found about your wide screen monitor:The HP Pavilion w17e LCD wide-screen monitor has the following features:\015\012 \015\012\015\0121440 x 900 factory-set resolutio ... Acer AL1916W 19" LCD Monitor

Input not supported


Do you get anything on the screen when you first turn on your computer?If you do the windows resolution somehow got set to high for the screen to handle. To fix this press the F8 key a couple times after the BIOS splash screen goes away ( ... View and View Technologies VNV AquaView 17XP 17 in. Flat Panel LCD Monitor

Not supported mode error


Hi, boot up to an F8 and select safe mode. While there change your screen settings to 800X600.The available resolutions in the windows operating system has to be compatble with the TV screen you are hooked up to. try lower settings firs ... HP Pavilion a305w (DM181AR) PC Desktop

Gateway desktop xp starts then flashes blue screen for split seco


Sometimes they make the recovery disk with windows on it, but not the programs that start windows during the boot up phase. One of the three main files that boots into windows is corrputed or your Master Boot Record is missing. There are two options ... Gateway PC Desktops

Monitor signal on monitor saying (input not supported) floating around the screen in a gray box. screen is black, with no response from computer. widows loads on screen when first starting computer, (no buttons on the monitor appear to work).


When your computer is starting up, hit F8 and you'll see the safe mode, safe mode with networking, etc. screen...You should see a choice that says "enable vga mode". Select that and windows will start and the os will select a screen resolution for y ... Acer X193W LCD Monitor

Have just replaced CRT screen with brand new 24- inch Acer V233H LCD widescreen monitor. Couldn't get the recommended resolution, so installed SiS v3.90 driver, (the latest, I think), but my SiS Utility / Support Modes only shows CRT - the LCD part is grayed out. What SiS driver do I need for LCD? Acer says to use 1920 x 1080. I can get this setting with the new driver, but now my Desktop is way longer than the actual screen, and I have to "scroll" left and right, with the mouse, to get to e


Right click anywhere on the desktop\015\012then on the window properties.\015\012then on settings. You should now be seeing your display properties.\015\012Check the slider along the lower left to see if it matches the 1920x1080 ... Acer V233HBD Monitor

I havE A VEIWSONIC Va520 when I turn it on , it brings up a screen saying out of range H-30-62 KHZ V-50-75 Hz what does this mean?


1. maybe the problem is with windows, because the refresh rate is set to an acceptable value2. your lcd screen runs at higher hz than 603. you are running a resolution higher than 1024x768 15" LCD's generally can only support ... ViewSonic VA520 15" Flat Panel LCD Monitor

I am trying to set up xbox live for my son but when i try to go live on the xbox dashboard it says that wireless network not connected but i have a wireless network running in my house and need to know how i can get a connection


\015\012Connect the appropriate wireless network adapter to the console. On the Xbox, a Wi-Fi adapter that c ... PC Desktops

I have a coby 27 in monitor i just got from a friend my pc is a dell. when i hook the coby monitor up to the dell its like it freezes up all the screen will say is unsupported mode, is there an adapter i can purchase to fix this problem?


It is likely that the monitor in question does not support the video settings you currently have your graphics card or chipset set to. If you are using Windows XP reboot your system hitting <F8> until a menu appears to select a mod ... Computer Monitors

Blue screen when I close the top of my laptop or shut it off


This error relates to video drivers. to fix this. restart your computer and as soon as you see dell keep tapping the F8 key in the top row to get advanced boot options. and then select "Enable VGA Mode" and press enter 2 times. then the computer shou ... Dell Inspiron 6400 Notebook

NO SIGNAL What do I do?


These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

Windows XP Home Video Doesn't Display


Well ; if you have a secondary partition " D: " say\015\012\015\012by pushing F8 , you can choose operate windows in safe mode , then try to see if there is a vendor soft ware that comes with your Radeon. you might find it at the lower r ... Dell Inspiron 9400 Notebook

Input not supported icon shows up


Is there a reset, restore button on the monitor? If so, press it.If this doesn't solve the problem, start Windows in Safe Mode by pressing on the F8 key as it is booting. When you get the black & white menu, choose safe mode. You should ... Acer X193W LCD Monitor

Blue screen says i need tech support


Read the complete solution please--------Depending on what the error says you may not need to contact technical support. Often this happens when the swap file becomes corrupted and since it is used as virtual memory, the OS assumes it is ... Dell Latitude D600 Notebook

Computer screen says imput not supported what do i do?


I believe at boot you should hold f8 for advanced booting options, and then select safe mode, which will start the computer in a lower resolution graphix. from there, set the resolution down on the display. right click on the desktop and select prope ... E-Machines eMachines Monitor E15T4

Getting message: "VGA mode not support"


Shut the computer off, hold the power button for five seconds.\015\012\015\012Once it's off, turn it back on and tap the F8 button until you see a black and white safe mode menu. Use your arrow key to select Last Known Good Configuration ... Mag Innovision LT982s 19" Flat Panel LCD Monitor

No Display - Screen says "NOT SUPPORTED"


Turn your computer on.\015\012When the boot screen cahnges to black start pressing F8\015\012You should get a Windows startup screen\015\012If you see the Windows Logo loading page, then hit the reset button and tray again.\01 ... Computer Monitors

Windows program shut down Laptop problem model-no-XPS M1530


It sounds like the hard drive might be failing or it might be a software problem. Try starting in safe mode and running a full system scan to see if it's sometihngi n the software. If not go to the Bio's screen and run drive self test. you do this in ... Dell Inspiron 1525 (dndppa1_3) Intel Core 2 Duo T5550 (1.83GHz/667Mhz FSB/2MB cache) 120GB/3000MB PC Notebook

Proview PRO576 error message "mode not supported" and will show nothing else


Okay, we got a fix by having another monitor hooked up to our computer and going in to display and changing the display settings to a lower setting. The screen resolution - turn it to lower - I guess somehow - the setting was too high for our monito ... Proview PRO576 15 in. Flat Panel LCD Monitor

I have a Dell GX60 and I changed the display resolution and


So, with The computer, completely turned off, Turn it on, Can't you see the BIOS screen? , or a Dell LOGO?It is when you see this BIOS or Dell logo Screen that you Need to:\015\012\015\012PRESS F ... HP Pavilion F1503 15" LCD Flat Panel Monitor

Fujitsu c series labtop screen goes blank, the hooked up to a monitor, starts to work then says out of frequence and goes blank


The video resolution and/or frequency that's set in windows is not supported by the monitor you have plugged in. Restart the PC in VGA mode (hit F8 after the BIOS messages but before any Windows messages) and change the video settings to something ba ... Fujitsu LifeBook C6555 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0687 seconds