Having problems with your HP A4331D 20" CRT Monitor ?

So I hooked this moniter up to my hp and all I get is two blinking lights


Answers :

\012One monitor serves as the primary monitor, and this monitor displays the Logon dialog box when you start your computer. In addition, most programs will display windows on the primary monitor when you initially open them. You can select different screen resolutions and different color quality settings for each monitor. Multiple monitors can be connected to individual video adapters or to a single video adapter that supports multiple outputs. To configure the arrangement of multiple monitors:\012
    \012
  1. Click Start, and then click Control Panel.
  2. \012
  3. Click Appearance and Themes, and then click Display.
  4. \012
  5. On the Settings tab, click Identify to display a large number on each of your monitors. This shows which monitor corresponds with each icon.
  6. \012
  7. Click the monitor icons and drag them to positions that represent how you want to move items from one monitor to another, and then click OK or Apply to view changes.
NOTE: The icon positions determine how you move items from one monitor to another. For example, if you are using two monitors and you want to move items from one monitor to the other by dragging left and right, place the icons side by side. To move items between monitors by dragging up and down, place the icons one above the other. The icon positions do not have to correspond to the physical positions of the monitors. You can place the icons one above the other even though your monitors are side by side.
Change Primary Monitor
\012
    \012
  1. On the Settings tab of the Display Properties dialog box, click the monitor icon that represents the monitor you want to designate as the primary monitor.
  2. \012
  3. Click to select the Use this device as the primary monitor check box. Note that this check box is unavailable when you select the monitor icon that is currently set as your primary monitor.
\012View Same Desktop in Multiple Monitors\012
    \012
  1. On the Settings tab of the Display Properties dialog box, click the monitor icon that represents the monitor you want to use in addition to your primary monitor.
  2. \012
  3. Click to select the Extend my Windows desktop onto this monitor check box. After you enable this feature, you can drag items across your screen onto alternate monitors. Or, you can resize a window to stretch it across more than one monitor.
\012Move Items Between Monitors\012
    \012
  1. On the Settings tab of the Display Properties dialog box, click Identify to display a large number on each of your monitors. This shows which monitor corresponds with each icon.
  2. \012
  3. Click the monitor icons and drag them to positions that represent how you want to move items from one monitor to another, and then click OK or Apply.
  4. \012
  5. Drag an item on your desktop across your screen until it appears on the alternate monitor. Or, you can resize a window to stretch it across more than one monitor.
\012Using DualviewOn many portable computers and some desktop computers (those with two video ports on one video card), you can expand your display to a second monitor by using Dualview. Dualview is very similar to the multiple monitor feature, with the exception that you cannot select the primary display. On a portable computer, the primary monitor is always the LCD display screen. On a desktop computer, it is the monitor that is attached to the first video out port. Once you attach the second monitor and turn on your computer, use the Display tool in Control Panel to configure your settings, just as you do with multiple monitors. You can use Dualview with docked or undocked portable computers.

Repair Help & Product Troubleshooting for HP A4331D 20" CRT Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

So I hooked this moniter up to my hp and all I get is two blinking lights


\012One monitor serves as the primary monitor, and this monitor displays the Logon dialog box when you start your computer. In addition, most programs will display windows on the primary monitor when you initially open them. You can selec ... HP A4331D 20" CRT Monitor

Moniter keeps blinking analog and digital at the


This happens when your monitor cannot detect a VGA or Digital port, either on the monitor it self or at the video card. If you don't hook it up to anything at all and turn it on it will do this. \015\012\015\012Step #1 \015\012 ... Samsung Computer Monitors

Blinking Screen? I have had my moniter now for about two years. I restarted my computer and now the screen just continues to blink (like a strobe light) I found a old moniter and hooked it up and it works fine... I also took the cords from the old moniter and hooked to the LG flatron and it still blinks... so its not the computer or cords i dont think.... Help? :) Thanks!


Mine does the same thing... what is a EHT problem & how do I fix it??? thanks! ... LG Flatron L1750S 17" LCD Monitor

Syncmaster paower button blinking and no display


First of all plug another monitor to the VC on your PC and do the same for the SamSung"I over heat"SyncMaster2 053BW. \015\012 \015\012\015\0 ... Samsung SyncMaster 204B 20.1" LCD Monitor

AOC lm720 no screen plus blinking green light


Sorry to say, but it sounds like you power board is due for an overhaul.\015\012It should be fixable since it does show signs of a little life left in it.\015\012It would have to be taken apart. A visual may tell for sure.\015\012Lo ... AOC LM 720 17" Flat Panel LCD Monitor

Gateway MX8711 no power, battery.....what?


1steflik:To disassemble:1) remove the four screws on the rear of the two top hinges2) fold the screen all the way back and unsnap the small bezel above the keyboard. Remove3) remove three top screws ho ... Gateway MX8711 Notebook

Wont come on


The fact that the light on the power supply is a brighter green and them dims when plugs is certainly a key factor. I would say there are three possible problems.\015\012\015\0121) The first problem to check is by far the easiest. Try removing the ba ... Acer Aspire 1642WLMi Notebook

Sony VAIO VGC-RB42G - No Power; Blinking green light on power


Try a different known working power supply on that computer, the green light on the power supply should be constant and not blinking. The green light on the motherboard shouldn't be blinking either but if its not getting the right voltage from the m ... Sony VAIO VGC-RB42G PC Desktop

IP connects... No internet.. Media Disconnected


1. You never stated if you tried a different Ethernet cable, i will assume its the same cable as the computer that Does acquire an IP via DHCP and work on the net."this computer also has wireless" have you tested to see if you can acquire ... Compaq Presario M2000 Notebook

Monitor light blinks


Have you tested the power supply connection feeds? test each connector I think you will find your power supply has failed on either the 5 volt or the 12 volt side more than likely 5 volts are down' the agp adapter needs 5 volts to run. since you have ... Samsung Syncmaster 730B 17" Flat Panel LCD Monitor

LG1717S - Power light flashing - no image.


The monitor is probably on protection.To start unplug monitor\015\012from power and from computer and test computer with different monitor\015\012to find out if it is monitor or computer fault.If it is computer fault and no vi ... LG L1717S-BN 17" LCD Monitor

LG 700E monitor's power LED blinking continueously, no display


The monitor is probably on protection.To start unplug monitor\015\012from power and from computer and test computer with different monitor\015\012to find out if it is monitor or computer fault.If it is computer fault and no vi ... LG 500LC Monitor

When I hook up my moniter it does not work like other moniters.


Ok sounds like you have a broken pin on your cable if you look in the end of the cable plug the part thet goes into the box but also check both ends if they are there \015\012failing that take monitor to roof and heave ho away it goes ... Compaq P 1220 22" CRT Monitor

Dc jack How do I replace the dc jack input on the Sony PCGK37


The PCG-K37 (Sony VAIO Laptop) uses a DC Jack soldered to a two-wire jacketed (shielding) cable that is routed under the DVD (tray) and towards the back to the Voltage Board located under the Touch Pad (Mouse) via a white polarized plug. The wires ar ... Sony PCGK37 Notebook

The blinking green light on VX922


If there is a flashing led on front of the monitor, that indicates a fault condition.\015\012\015\012\015\012\015\012The flashing light indicates a diagnostic state called protection.\015\012\015\012When the Monitor goes on protecti ... ViewSonic VX922 19" Monitor Flat Panel

Hi my laptop wouldn't start up so I bought a new battery and it still wont start up. I can get the power light and the battery light so I don't think it's the power cord I can pull out battery adn unplucg and get two green lights sometimes - othertimes when I switch it on i get blinking yellow light on the power led can't get it to the full green lights or anything on the screen. anyone got any ideas? thanks


Reseat the RAM.\015\012Sometimes the RAM needs reseating because the RAM module/s are not making proper electrical contact with the motherboard.\015\012If this doesn't work then :-\015\012The RAM module/s could be faulty, if you hav ... Toshiba Tecra 8100 Notebook

Vaio fj270 wont boot to windows stuck with a blinking underscore


Hello and thank you for using Fixya!\015\012\015\012First, check and make sure there are no CD's in the CDrom player. Also, check an make sure there is no external storage devices, such as a flash drive, external, etc.\015\012 ... Sony VAIO VGN-FJ270/B Notebook

My emachines T3828 will not power up. I changed the power supply, but that didn't help. my next suspect was the power switch. I found that the wires wer a little loose. Thinking that the power switch wires were one unit, I pulled them. Imagine my surprise when I saw that they wer actuall three seperate wires, One black and white, One blue and wdhite, and one red and white. I need to know how to reconnect them, and in which order. I also noticed that a green light comes on. I assume this is for t


Hello there,The green light on the motherboard is there to indicate that you are in fact getting power to the board, which is good. The wires you refer to are in fact the power switch, reset switch, and probably some type of ... E-Machines T2742 PC Desktop

My Acer LCD AL1711 went off after seconds of turning on.


This monitor has "back lights" that are essentially like flourescent lights. These are high voltage lights and can easily fail. since you are getting some light initially, I would suspect a defective part that heats up a bit right away and then fai ... Acer AL1711BM (Black) 17" LCD Monitor

I have a proview PA-19DKS MONITOR. It hasn't been hooked into a computer yet. But it has been hooked up to cable so my daughter can watch cartoons.Recently, when it is turned on it shows the blue screen for a few seconds and then goes completely black. What could be the cause?


The lcd has three parts, the screen plate(windows)/the logic(vga)/the\015\012inverter(power plug). Parts that go are the backlight ccfl's, behind\015\012the plate, and parts of the inverter, ie capacitors, all three take a\015\012bit of power from th ... Proview PL913S 19" Flat Panel LCD Monitor

Monitor stays on for a few seconds then goes out


This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

Laptop Power Issues


My probleams is when starting pc and at that moment laptop noise create so whats i can do piz given reply ... Toshiba P25-S670 Notebook

Will NOT start up, or switch on. battery and or Mains power green lights blink orange./ yellow. been doing it for months, so I do not turn it off, seems to run ok once it is going, but it is slow, had a new motherboard a year or so back - its a satellite TE2100. if I unplug the battery or the mains until the orange lights stop flashing and reconnect mains power, I MAY get a green light, then after fitting battery , that will glow orange, and eventually go green , but no guarantee that it will st


Hello and thank you for using Fixya's services. I have a couple of questions and some troubleshooting tips for you:Questions: Is the splash screen coming on at all? Any picture or text right when you boot up? What Window ... PC Laptops

Samsung 931 B - Dual monitor setup. one monitor no longer shows anything - LED is blinking about once every 0.75 seconds. either power cord or either source cable works with other 931B, but broken one shows nothing on screen, ever. screen actually blinks SLIGHTLY at same interval as LED. not using DVI cable- using old school rgb on each. i need two identical monitors. fix this one (myself or professionally) or get new one?


The caps (capacitors) in the powerboard are going out. This is a very common problem in all class and price ranges of modern lcd and plasma tv's/ monitor's. I don't know if this problem has been like this for awhile or it just started, but either way ... Samsung SyncMaster 931B 19" LCD Monitor

VX922 monitor, blank screen, blinking power light


\015\012If there is a flashing led on front of the monitor, that indicates a fault condition.\015\012\015\012The flashing light indicates a diagnostic state called protection.\015\012When the Monitor goes on protection there a ... ViewSonic VX922 19" Monitor Flat Panel
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8408 seconds