Having problems with your HP A4331D 20" CRT Monitor ?



Answers :

\015\012You need to know what frequency the computer is outputing. That monitor will take a wide variety of inputs. And, your application can change the output as well. You can check the two links I provided, and HP will have some recomendations, possibly pricey, but they'll work.
\015\012Some multisync monitors will display the input frequency is when it comes on. Try connecting the monitor when the application is running, and when it's just on but idle. If it has a menu screen (monitor), open that and some have the current frequency being used listed. With those two ranges, you should have a starting point.
LCD monitors can replace ur monitor

Repair Help & Product Troubleshooting for HP A4331D 20" CRT Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :


Http://www.monitorworld.com/Monitors/hp/a4331d.html\015\012\015\012 ... HP A4331D 20" CRT Monitor

Trubleshoot Motherboard what is mother board prob and how can find n fix them....

More than 70% of all computer problems are related to cabling and connections. Ensure all cables are connected and connected firmly. IDE and floppy ribbon cables and power cables can often go loose. Ensure microprocessor, memory modules, and adapters ... PC Desktops

LG flatron L1970 h monitor flickers.

Just fixed mine :) Biggest mistake was to try to open the monitor itself :( But I didn't brake anything :DYou just have to gently open the transformer unit (power brick) and replace two identical 1000uF 16V capacitors. H ... LG FLATRON L1970HR LCD Monitor

Dead My computer dead when electricity was down. i test power supply to another computer, it works. i put windows xp and install, on the mouse and keyboard stops functioning and fail to command installation.

\015\012\015\012Check your Keyboard-Video-Mouse (KVM) switch. If the system is connected to a monitor, mouse, and keyboard through a Keyboard-Video-Mouse (KVM) switch, or console selector switch, then disc ... IBM NetVista PC Desktop

ViewSonic VX922 monitor - black screen - green power light flashes

PLEASE read Carefully so here is a fix for the green blinking light ...the monitor is going into shutdown....protect mode......THIS is ...Only for the seasoned electronic service tech ......YOU NEED TO BE into Electronics ..or have electronic backgro ... ViewSonic VX922 19" Monitor Flat Panel

Flashing power button on Samsung SyncMaster 920NW

Yes, More than likely the problem with the unit is blown capacitors on the power supply board, the flashing power light is a good indicator of this type of failure. Here is a link to a repair guide with pictures and videos showing how to open the uni ... Samsung SyncMaster 920NW Monitor

Dell 20 Hi my dell lcd monitor won't gon after i saw a smoke . I open it and don't see anythink burnd bye Dave

Dear Tirat\015\012\015\012Hello Dave, well unfortunately your problem here is not going to be all that easy to resolve as components that burn out are not always visable to the naked eye. However, there are logical methods of approach tha ... Dell 2000FP 20.1" LCD Monitor

Samsung SyncMaster 940n monitor that turns on then goes black

Rcpips, You may need to replace one or possibly 5 -8 aluminum can "electrolytic filter capacitors" on the "switch-mode-power-supply/CCFL inverter board. If, as you say "works for 5 or 6 seconds" then that means that fuse is good. Another thing you wi ... Samsung SyncMaster 940N Flat panel Monitor

My window shrinks and expands uncontrolably - PC Desktops

I have reviewed your problem and have the fallowing for you to aces.\015\012First, I have been a technician for HP and Gateway for almost 20 years and you will not have to worry about incorrect information.\015\012First, I wi ... PC Desktops

Where do we find the display lid switch for a HP Pavilion dv9715nr ? we replaced a damaged hinge on this laptop first and now we cannot get a display.

Let me guess. Damaged Left hinge? HP had a recall for this problem, but the recall has lapsed as of May 31, 2009. ... PC Desktops

LG L196WTQ monitor just quit working. won't turn

Hello,This type of problem is usually due to a failure of the filter capacitors in the power supply board. The L196wtq uses the aip0157 power supply board that has 6 capacitors in the filter section when they start failing you get either no p ... LG L196WTQ Monitor

Westinghouse lcm 19v5 won't power on period

I have a Westinghouse LCM-20v5 that would have problems powering on, and then it would power on for about 1/8 sec and lose the picture. It died 1 year and a few months after purchase. That sucks. LCD screen problems are often caused by the interna ... Westinghouse LCM-19v5 Monitor

Monitor flickring Hi All, i am using the mercury (intel 845 gl chipset) mother board and i installed latest graphic drivers from intel site and i changed my monitor refresh rates also but my monitor gives flickering i tested My cpu with my another freind's monitor but there also gives flickering and i am sure that no magnetic devices are near to my computer and i checked the all power cables and i replaced the all power cables also but it is giving flickering, my monitor is flickering while in t

\015\012Flickering screen display Flickering on the screen can be caused by defective hardware in the computer or by improperly installed software, but it can also be caused by interference from external device ... E-Machines E17T 17" Flat Panel LCD Monitor

Monitor working properly but it sounds continously,very noisy

Hi im josh in cebu phils.may i help you? Friend try this solutions:\015\012Problem: Your Monitor Doesn't Display—The System Unit \015\012Issues a Series of Beeps\015\012Your PC uses beeps to communicate with you when something is \015\012 ... Dell Pentium 4, 2.26 GHz (1W391)

I have a Samsung 712n monitor that passes a self

Jcriley, If your SAMSUNG is not to old, try to get them to replace it or do a cash+old unit for a same model refurbished unit! You may have a monitor that has a "switch-mode-power-supply" that is in partial or full shutdown mode. When very strange an ... Samsung SyncMaster 712N 17" Flat Panel LCD Monitor

Moniter Black - Buttons not responding

This sounds like a straight hardware issue. However, to be certain, try to attach another monitor to this PC, and if it works properly, you will know that there is nothing wrong with the graphics card/driver or other related component of the PC invol ... X2Gen MG19MY 19" LCD Monitor

Help i have a e17t4 monitor and i have pluged it in to 2 computers same thing happens on both comps i pluged the monitor to power i get blue lite then solid greenand stays green i can turn it off and onat this point but when i pluge it in to the computerafter sitting awile it comes on normale and shuts off and you cant turn it back on un less u un plug it for a while and then it will do the same thing

Hi crabguy,To my understanding, this is a common problem with some eMachine monitors (including the E17T4) since its production start sometime 2004/5.Your particular concern could be due to several possibilities:1. faili ... ViewSonic VA720 17" LCD Flat Panel Monitor

W1907 Monitor Goes Blank

If you still have this monitor type, you are obviously no longer under warranty and need some help, not "smart alek" or "return" it advise.The issue is with the power board that feeds the inverters which in turn power the CCFL bulbs. This mon ... HP Compaq WF1907 Monitor

LG f700b raster problem

If the lines are slanted, you are seeing 'retrace' of the horizontal sweep.\015\012The distortion at the top is probably caused by a failing electrolytic capacitor in the vertical deflection circuit or in the power supply filtering for that circuit.\ ... LG Flatron F700B 17" CRT Monitor

Hello My Chimei dispay show sup for a second when I boot my PC, then returns to black screen. I swicth it Off and then On again some times,so do I with tehg PC and sometimes this help getting the display show up constantly. By the way A slight noise (wooshh) can be heard each time it switches On for a while. Can you help me? Thanks Shlomo Am-Shalem

Idith, I will assume that your Chimei is a LCD type with CCFL backlighting and not a CRT or PLASMA type. I think that the unit has a thermally intermittant solder connection and /or BAD capacitors on the "switch-mode-power-supply" and or the "cold-ca ... Computer Monitors

VX900, Backlight Works, But no picture.

It is impossible to see defective components visualy, unless there was a serious burn-up or something like that. \015\012\015\012Without at least a DVM you cannot even verify if the power supply is functioning properly!!! \015\012 ... ViewSonic VX900 19" LCD Monitor

Dont get vidio at all see drives light up and can

Being able to open a cd or dvd drive only requires power to be going to that unit. The following assumes your monitor is working but is just not displaying anything.What you are describing sounds like you are having a hardware or BIOS iss ... HP Compaq Presario SR2013WM (RE468AA#ABA) PC Desktop

I have a LM729 AOC monitor had to turn on and off to get it on then it went black ?

Autotech_2, Your monitor if it is an LCD "cold-cathode-fluorescent-tube" backlight type of display your "switch-mode-power-supply" has partially or totally gone into SHUT DOWN mode to save itself from "catastrophic failure"!!! Please go and visit YOU ... Computer Monitors

Samsung syncmaster 206bw turning on and of, light

Hello,The problem you have is caused by one of two things,\015\012either a blown power supply in the backlight inverter or bad backlight\015\012bulbs. More than likely it is the bad power supply. The problem in the\015\012power supply are ... Computer Monitors

Opened my unit, a Philips 17PF9936-37 17" Flat Panel LCD Monitor.

If the unit is not powering on at all then it is the power board (the one with the voltage coils, if it is powering on then replace the board with the two heatsinks(video board.) ... Philips Epic 17PF9936-37 17" Flat Panel LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6688 seconds