Having problems with your HP 2025 20.1" Flat Panel LCD Monitor ?

No DVi input, then computer goes to sleep

\015 When I turn my computer on, my HP flat screen, w2207 monitor gives message"no dvi input" and then goes to sleep. Then I have to shut down and restart, it takes about 3-4 times before the monitor connects correctly. What do I do?\015\012\015\012I had trouble when i first got this monitor, the analog D-sub, always worked, after a lot of time and effort, the dvi input worked, it has been a couple of years with no problems..now it suddenly stopped working..i have updated the driver, probably just a few weeks before it stopped working. When i select the dvi input...monitor goes to sleep mode..then screen goes black.\015

Answers :

Hi publicworker,

I had a similar problem whereas my monitor went to sleep mode after a few minutes. I'm running an HP LP 2065 in dual mode with another HP flat screen. However, I did resolve the issue after resetting the output settings.

How to do that:
  • right mouse click on the desktop
  • \015\012
  • select graphic options
  • \015\012
  • output to
  • \015\012
  • extended desktop
Maybe some changings/modification will help you too.

Repair Help & Product Troubleshooting for HP 2025 20.1" Flat Panel LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

No DVi input, then computer goes to sleep

Hi publicworker, I had a similar problem whereas my monitor went to sleep mode after a few minutes. I'm running an HP LP 2065 in dual mode with another HP flat screen. However, I did resolve the issue after resetting the output settings. ... HP 2025 20.1" Flat Panel LCD Monitor

No DVi input, then computer goes to sleep

I have a new HP pavilion slimline with Vista......a 19 inch flatscreen monitor......I went nuts with it not connecting and saying no DVI input......\015\012\015\012I tried something and so far it has worked 10 times in a row...\015 ... HP 22" Widescreen Flat Panel TFT LCD HD Monitor

Hp monitor cannot switch from DVI to VGA because of sleep mode

... HP Pavilion F1703 17" LCD Monitor

Cpu says no input vga signal, then goes to sleep

The no input VGA signal just means that the monitor is not receiving anything from the graphic card on the tower. Is the card a digital (DVI) output card? You'll know by the connector, it's white and slightly wider than a standard VGA connector. I ... HP GX613AA Pavilion A6300F Desktop PC

F1903 not turning on with tower when restarting

When the Monitor is on, open the monitor's On Screen Display and select the proper input: DVI-Digital/ DVI-Analog or VGA that the PC outputs and set that as default. When the computer starts up, the monitor will then "Wake Up" I had this same issue ... HP Pavilion F1903 19" Flat Panel LCD Monitor

Hello, I have a HP 22w LCD monitor, running

Can you try the monitor on another computer? Also, make sure the cable is tight on the monitor side. And you also may need to replace the cable between the monitor and the computer. ... HP dx2300 Monitor Personal computer Intel Core 2 Duo Processor E2160, 1 GB RAM, 80 GB Hard Drive, ... PC Desktop

My monitor when powered up gives me a no input signal for VGA and DVI and then goes into sleep mode after 15 seconds. I plugged in a second monitor and have a no signal message too. Should i replace the video card or has the monitor locked itself out. Please advise....Best Regards Beth.

Hey BethSounds like you are in a bit of trouble!Based on what you've told me, it looks like it might be a video card fault. However, a few things to check first are..Make sure the VGA & DVI are secured tightly ... HP f2105 21" LCD Monitor

Monitor malfunction, says VGA Input: No Signal and goes to sleep

From what you have described it appears that the onboard video might have malfunctioned,there is no way to replace it, you can however go buy a video card from your nearest computer retailer. you just want to make sure it is compatible with your mach ... PC Desktops

Viewsonic VX2233WM LCD DVI issue

... ViewSonic VX2235wm LCD Monitor

Going to Sleep

Due to the power surge, it is highly possible that the monitor was given a boot by your computer on it's way out.\015\012\015\012This will short out a very small transistor inside the monitor on the video board and in turn, then monitor c ... HP Pavilion F1903 19" Flat Panel LCD Monitor

"No signal detected" when LCD connected with DVI-D Cable

Thank you for providing your configuration details.\015\012You have failed to specify wheather or not your LCD Display is under Warrenty.\015\012\015\012Perhaps these simple trouble shooting procedures will get the job done.\0 ... BenQ FP71E 17" LCD Monitor

My monitor goes to sleep and doesn't come back on.

For that when you power up the computer press F8 key then enter in enable vga mode .\015\012Then go to display property and set screen resolution to 1024*768 then apply and ok.\015\012if still not work then try safe mode then uninstall gr ... HP w1907 LCD Monitor

LG 2542T goes dark after showing "analog power saving mode" message

If it is saying analog signal power saving... I am wondering do you have it hooked into you computer with the white DVI cable?Is there an option on your monitor to switch modes? Analog-Digital? If you are using the white DVI cable to hoo ... LG L1717S-BN 17" LCD Monitor

Monitor malfunction, says VGA Input: No Signal and goes to sleep

If it was your video card, you would have no picture at all. Try to boot in safe mode and do into your options and make sure your hibernation is not on. Only other thing I can think of, it could be *********** board. ... HP Compaq Presario SR2011WM PC Desktop

Moved computer & monitor and now monitor keeps saying no input signal and goes into sleep mode

... HP Pavilion F1903 19" Flat Panel LCD Monitor

Lcd monitor goes black after 5 seconds

Some new capacitors on the vga converter board. Which ones, i don't know for this model. ... Relisys RLT1720 17" LCD Monitor

Our HPw1907 monitor appears to constantly want to go to sleep. within 1 or 2 minutes when your on the computer...it like goes blank....I've checked all the settings...but nothing seems to indicate a problem....I've now put a older monitor on...


No input data

Generally this means that the monitor is not getting a signal from the computer.\015\012\015\012You can also get this message when a computer goes into standby. Pressing a key or moving the mouse can bring it back. \015\012\ ... HP PC Desktops

Monitor Display Problem.

The first Polyview has a power supply problem (a short) and locks out the power until it is unplugged. You need to check the voltages inside the Monitor to determine which component/s are faulty. I hope you know electronics if not leave it to the r ... Polyview V17E 17" LCD Flat Panel Monitor

Power Saving Mode problem using the DVI input. VGA input Ok.

Try the display on another computer, if the display does the same thing on another machine, then its definitely a problem in the display not in the computer drivers or bios.\015\012 ... Dell UltraSharp 1704FPT 17" Flat Panel LCD Monitor

Screen shows message "no input signal" and monitor goes to sleep.

Monitor show "no input singnal" error masage when not gating any type of video singnal ,\015\012so if u realy check your monitor wires for correctty plugged in . \015\012then:- Two possibilities:\015\012either the ... HP vp17 Monitor

Monitor going to sleep at startup

Try changing the video card of your computer.. ... HP vs19 (Silver) 19" LCD Monitor

Monitor goes to sleep and never wakes up

I have called HP Technical Support 6 times about this issue and have logged at least 14 hours into the issue. The things they have done are turn all sleep settings in the "Power Options" in the control panel to "never". The problem persisted. Today, ... HP w2207 Monitor

I have a flat screen tv and monitor combi i want to add

Yes, it should be possible. I need to ask if you connected your PC through the DVI or RGB input from the back of the computer to the TV. There are 2 main connections for computer monitors. One looks like a plug with 15 pins in 3 rows of 5 (RGB) and t ... PC Desktops

My HP 2009m goes into sleep mode & shuts down

I just bought a 20 inch HP 2009m monitor about 2 months ago.One of the functions within the monitor, is to go to 'Sleep' The Sleep mode is to keep the monitor active, but using very little power.(I always turn mine off w ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7365 seconds