Having problems with your Hannspree HC-194D 19" LCD Monitor ?

When i came home from work today, one of my monitors wasn't working. i have two hc-194D monitors, one was working fine (the one i'm using now). neither one had showed any signs of trouble yesterday - i usually leave my computer on all the time. no power LED speaker constantly clicks when i plug either the AVI cable, analog cable or the power cord in i've swapped cords and i've tried using another power cord opened up the monitor, nothing looks fried or out of the ordinary


Answers :

Hello,

The clicking is a sure sign of a bad power supply. Go to our web site and check out the pictures of what blown capacitors look like, www.ccl-la.com/badcaps.htm Now open the back of your monitor again and look at the power supply board. Check the capacitors, the tops should be flat if hey have any bulging at all then they will need to be replaced. If any are damaged then replace them all because the rest will soon pop too. Be sure to use high temp replacements that will be marked 105c. Do not use caps from Radio Shack they are only rated for general purpose not high frequency use. You can order the correct ones from several places on the internet or we can supply them for you. The values you will need to get are going to be marked on the sides of the ones coming out but will be like 220uf, 470uf 1000uf etc. and have a voltage rating. When you insert the new caps in the board be sure to have the polarity stripe going the same direction as the old one goes. If you have any more questions just let me know.

I hope this helps, If so please rate our solution.

Buddy
Corporate Computer
www.ccl-la.c
[email protected]

Repair Help & Product Troubleshooting for Hannspree HC-194D 19" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When i came home from work today, one of my monitors wasn't working. i have two hc-194D monitors, one was working fine (the one i'm using now). neither one had showed any signs of trouble yesterday - i usually leave my computer on all the time. no power LED speaker constantly clicks when i plug either the AVI cable, analog cable or the power cord in i've swapped cords and i've tried using another power cord opened up the monitor, nothing looks fried or out of the ordinary


Hello,The clicking is a sure sign of a bad power supply. Go to our web site and check out the pictures of what blown capacitors look like, www.ccl-la.com/ba ... Hannspree HC-194D 19" LCD Monitor

Hc194D - no power


... Hannspree HC-194D 19" LCD Monitor

The power light blinks solid blue every four seconds or so (it?s off in-between). The screen is blank. None of the buttons on the side function (such as ?menu?). I have a second similar monitor from the computer in the other room I?m using to type this proving the video card and cable are fine. We?ve always (as in years) left the monitor on (w/ a screen saver) but for whatever reason turned it off for four days when we went away recently. The monitor would then not turn back on. After leaving th


Hello,\015\012Two days ago I received a Gateway 900w FDP1975W Monitor from a friend. He told me that he would have to let it rest and it would work for about a hour or so and flash green with lines, then Flashing blue power light, then nothing. ... Gateway FPD1975W 19" LCD Monitor

PF790 monitor picture issue


Was it dropped? If so, it could be a board crack or damage to the CRT.\015\012\015\012Was it stored in an unheated garage, shed, or attic, etc.?\015\012\015\012Damp air or widely changing temperatures can cause condensation on the circuit boards.\015 ... ViewSonic PF790 19" CRT Monitor

Push the on button and nothing happens


I believe you are using a new power supply now.\015\012Before you start, first check if your Power button is OK.To do this, first unplug the power cord from your PC.Remove POWER-Button connector (with black/white or blu ... HP Computer Processors

I want to hook my logitech to TV and xbox 360 and my PC. I got a soundcard for about 120bucks that supports 5.1 right now i connect my TV with optical out from my z5500 to input on my viasat tuner. Like that i get all speakers working but at what quality i have no idea.. also my pc is conected using the 6channel 3x 3.5mm jacks. Works fine. But my xbox get no sound using the RCA cabels from the xbox 360 component cable (red and white) either to the tuner input, or the TV input. neither o


\015\012VGA only does visual. You will either need an optical cable for your set or a red and white cable for your telly.\015\012---------\015\012why are you using a 2-into-1 adaptor?what sort of inpu ... Logitech Z-5500 Computer Speakers

Monitor stays on for a few seconds then goes out


This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

Lost power to 3 of my 4 monitors


Hi,\015\012\015\012There is one option by which you can check if this is a power issue or a power source issue.\015\012Remove the power cable (End connected to the monitor) from the working monitor and connect it to the monitors whi ... Dell Computer Monitors

NO SIGNAL What do I do?


These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

Nothing on the screen after power on


Turn on the computer and complete the following steps:\015\012Step 1: Check cable connections\015\012(If you can see the initial HP or Compaq logo screen but later lose the picture, you can skip to Step 2.)\015\012check the video cable connection on ... HP Compaq FP 7317 17" Flat Panel LCD Monitor

My hp pavilion a336n will not turn on. When I plug the power cord in the light on the back of the hard drive will turn on, but when I press the power button nothing happens... any suggestions?


To resolve this issue you may need to open the chassis (the computer cabinet). You can call HP specialized support for help but they charge you for the support. You can call them at 866-211-5207. \015\012\015\012OR - Follow the given step ... HP PC Desktops

Volume control appears on screen uncommanded and cannot be sent away


I had exactly the same problem. The volume up button was constantly on, causing the on screen display to be permanently displayed. Here is the solution to fix it. This will also work for any other front panel buttons that are misbehaving.\015\0 ... Philips 190B6CB/27 19" LCD

CPU doesn't turn on!!


\015\012\015\012\015\012\015\012\015\012Power supply light on or flashes\015\012Perform the following steps, in order, until power is restored or it is determined that there is a hardware failure ... PC Desktops

My monitor will not come on when power is applied automatically. the monitor does not come up when my system comes on. I just replaced the monitor which i swapped same exact monitor, but this one will not boot when the system comes up.


Please work through the following steps to troubleshoot your no power problem with a ViewSonic Monitor:\015\012\015\012Troubleshooting Power Issues: \015\012\015\012Disconnect and securely reconnect ... ViewSonic E70f 17" CRT Monitor

HP desktop monitor problem


Hi try this ,,,\015\012\015\012\015\012Ensure the video cable is connected (and connected to the correct video port).\015\012\015\012Turn off the monitor using the monitor's power button and then restart th ... HP Pavilion a305w (DM181AR) PC Desktop

Compaq EVO 510 2.4GZ Motherboard Question


Motherboard was tested before shipping? Good. Want you to know I wasn't trying to be a smart aleck with my statement. I was trying to find out if the motherboard was removed from a computer, and the state of the motherboard was not ... Compaq Evo D510 Minitower (Open Box) (OB4700432011) PC Desktop

Samsung 931 B - Dual monitor setup. one monitor no longer shows anything - LED is blinking about once every 0.75 seconds. either power cord or either source cable works with other 931B, but broken one shows nothing on screen, ever. screen actually blinks SLIGHTLY at same interval as LED. not using DVI cable- using old school rgb on each. i need two identical monitors. fix this one (myself or professionally) or get new one?


The caps (capacitors) in the powerboard are going out. This is a very common problem in all class and price ranges of modern lcd and plasma tv's/ monitor's. I don't know if this problem has been like this for awhile or it just started, but either way ... Samsung SyncMaster 931B 19" LCD Monitor

PROVIEW PL-456S LCD MONITOR TURNING PINK ON ONE SIDE


Chances are that you are not hurting anything with the lower power supply. What is probably happening is most likely two fold.\015\0121. The light bulbs in the backlight circuit may just be wearing out and need replacement, and\015\0122. the lower cu ... Proview PL 566s 15" Flat Panel LCD Monitor

Mymonitor started flickering constantly,just started,help


I do not want to pay for assistance, my monitor is under warranty. I want to know where i need to call or go to have monitor repaired or speak to someone "without having to pay".That is not under the warranty,having to pay to speak to someone just to ... Proview PL926WBi 19" LCD Monitor

My computer wont open windows


Step 1: Removing recently added hardware\015\012Use the steps in this section to disconnect any recently added hardware and test for the error. \015\012NOTE: If a new internal device (sound card, hard drive, or other) was ad ... Compaq Presario 5000 PC Desktop

I have a HP Compaq Dc7600 sff. The computer made a popping noise and went dead. I waited a few minutes to see if it would restart. It did not restart. No power at all.


At this point I would take the diagnoses further. This of course depends on you, and if you feel comfortable with the procedure.However I would like to back up for a moment, and would like you to check that the computer is indeed getting ... HP Compaq dc7600 Small Form Factor PC Desktop

Computer is not working


Disconnect EVERYTHING FROM EVERYWHERE!Reset CMOS.Grab the main power cable from the power supply unit and attach the ATX connector to the motherboard.Make sure the processor fan is connected to the correct socket on the motherboard ... E-Machines eMachines Desktop PC

Have a dell computer when it starts up the moniter and keyborad will not come on .i have checked the cords and are plugged in


Hello there:I would first try this . use a different monitor and keyboard (one at a time) and reboot each time and see what happnes just to check things out.If it still happens than you know it is related to the computer and not ... Dell Dimension 3100 PC Desktop

How to fix a dell monitor dimension 2400 power button broken


The last guest left us hanging with, "easy fix" so, I ventured ahead to see what I could see by opening up my lcd, which was a puzzle in itself. After UNPLUGGING the monitor and removing the stand and the 4 obvious screws in the back, turn the monit ... Dell Dimension 2400 PC Desktop

Won't power on. No lights at all.


You have done Most of it...\015\012You have tried to swap the Power cords that work fine with the Other Monitors and If that do not work there are 2 things externally that could be bad.\015\012\015\0121-> The Power Button.\ ... ViewSonic VX924 19" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.3459 seconds