Having problems with your Hanns.G Corporation JW-199DPB 19" LCD Monitor ?

How do i open hanns g monitor?

\015 I want to take the back off of it how do i open it?\015

Answers :

#1 Remove the stand mount off the back of the monitor
\015\012#2 Remove the 4 screws in the corners of the monitors
\015\012#3 The monitor is now only held together with builtin plastic claw clips. They are connected to the back piece and hook onto the face piece. Use a flat object, I use a small screwdriver, to ress against the clip at the seam of the monitor. There are 3 clips down each short side, and 4 on the top and bottom. You can see a tiny marker showing each clip location at the seam. So press against the clip and gently pry the two pieces open holding it slightly open until you can spring the next clip....and so on, on each clip until it is open.
\015\012#4 once open remove the 4 lugs at the video connectors
\015\012#5 remove the two sheet metal screws.
\015\012#6 sit back realizing those clips hold the plastic together so well that screw are just overkill after that. :P
Repair Help & Product Troubleshooting for Hanns.G Corporation JW-199DPB 19" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do i open hanns g monitor?


#1 Remove the stand mount off the back of the monitor\015\012#2 Remove the 4 screws in the corners of the monitors\015\012#3 The monitor is now only held together with builtin plastic claw clips. They are connected to the back piece and h ... Hanns.G Corporation JW-199DPB 19" LCD Monitor

How to connect 3 LCD monitors to a computer


Some cards can send 2 outputs that is split by the cable, which is connected to 2 monitors. Generally speaking though, most just split the image up If you're not sure if your output supports multiple monitors off one output, ... Dell DimensionTM E520 PC Desktop

New hanns-g monitor


Http://cms.hannsg.net/onweb.jsp?webno=3333333752 ... Microsoft HannsG HU171D 17" LCD Monitor

Flashing green LED on my Hanns-G HX191D


Common problems on monitors are due to capacitors in the power supply/inverter circuits failed, you need to open it up and look inside for caps with bulging top/seal first and post back what you see so we can guide you further, see failed monitors du ... Hannspree HANNS.G HX191D 19" LCD Monitor

Black screen green lite on/flash right green lite off


Hello,The problem on your monitor is a bad power supply. We you can solder you should be able to repair it. If you check our site at :www.ccl-la.com/badcaps ... Microsoft HannsG HU171D 17" LCD Monitor

22" Hanns G can't config..driver issue? Some of the pages look ok but the resolution is maxed at 1680 x 1050 (per tec support) and although it real sharp everything is like 14 point.


Recent Hardware Changes. Corrupt drivers for any recently installed hardware can crash the system. To get rid of the corrupted drivers, do the following:a. Uninstall all recently added hardware. b. Try to restore the system t ... Microsoft ChiMei CMV938D 19" Widescreen LCD Monitor

Blue amber flashing no picture


Hello,Very common problem with these monitors after 2-3 years. The power supplies have died. Go to our web site and we have repair guides for Hanns-G monitors. The problem is the heat buildup in the case has caused the capacitors in the p ... Hanns.G Corporation JW-199DPB 19" LCD Monitor

My Hanns G LCD 19" Moitor issue


Have you tried reseting the monitor to factory defaults, or pulling the plug, waiting then replugging it?If you can see a picture in a dark screen, it means the backlight has blown. These are special bulbs that may be difficult to find, ... Hannspree HW191D LCD Monitor

Hanns G 19" LCD monitor Screen Problem


D3mon,\015\012Looking at the photo that you took... You've defintely got a damaged panel. My advised get a new one...saved you the headached and $$$.... ... Hanns.G Corporation HU-196DP LCD Monitor

Hanns-g 19 I know the power is good at the cord, but the green light on the monitor does not even come on. I hate to take it apart, since it still has a warranty, but I need to get something up and working. Is there a circuit breaker or fuse inside that may have popped? Thanks Ken


Yes there is a fuse iside the monitor, but you should not open this because as you said this is still under warranty. its better if you are sure that the problem is really the monitor then you need to return this to your supplier for their replacemen ... PC Desktops

Something akin to background hash marks jump about 3/4 of the way up the screen on my Hanns-G 28" LCD monitor. I have had it for about two years and this did not occur until recently. I purchased a new video card but the problem persists. Additionally, when I power down the computer sometimes the monitor goes black before the log-in screen appears. the LCD indicates no signal. Computer restarts fix the no-signal condition, but the flicker problem persists. It is not always there and from time to


You either have cold solder joints or a Leaky capacitor and maybe a capacitor fixing to open up if you remove back to your monitor look at the caps see if any of them are puffed up on top if so replace them for Parts Call Mats Electeonics 1-800-628-1 ... Computer Monitors

Have a Hanns G HG281D that has started to go to a


I have had the same problem, but noticed something while moving cables. When I tap on the side of the screen, near the control buttons, it fixes it. You know like in the old days when your tv wasn't working, a good bang on the side of it got it worki ... Hanns.G Corporation JW-199DPB 19" LCD Monitor

My HP monitor (f50) has malfunctioned


Try these 2 steps if they don't work get back to me :)Step 1. Connect the video cable and turn on the computer. What happens?\015\012 \015\012\015\012 \015\012\015\012 ... HP Pavilion F50 17" Flat Panel LCD Monitor

The monitor turns off and on repeatedly.


There are lots of reasons why it can shutdown, but happerlly none should be serious. It may be that the B+ or Power supply is too high, look for a pot near the power supply and try turning it down a bit. Also the x-ray protection may be too high, loo ... ViewSonic VE710b 17" Flat Panel LCD Monitor

How to open casing


Just managed to open a FP17G+ monitor. My hope is that FP17G is similar and that this comes in handy.\015\012\015\012There are 5 screws holding the casing together. Four are in the corners (black screws on my monitor). The 5th is right un ... BenQ FP71G 17" LCD Monitor

How to open the casing of my LCD Monitor Model HP w 1907v


I have a problem of opening the casing of my LCD Monitor, I want to open it so that I can visually check inside. ... Hyundai ImageQuest L50A 15.1" Flat Panel LCD Monitor

Pls tell me how to open monitor for repair


Protocol Internet Caf'e\015\012AL SALAMAH ST. JEDDAH\015\012\015\012\015\012I also opened the cover of monitor but its really hard because the two clips hold it tight from the top of monitor. First I open the 2 screws at the b ... Samsung SyncMaster 753S 17" CRT Monitor

I usually dual monitor and have programs open on both. now that i am at home i do not have my second monitor only my laptop. when i go to open a certain program it opens on my "second monitor" that isnt there and i cant figure out how to move it to my desktop.


You should go to the display properties on your laptop while at home and disable the dual monitor setting. You should then have all programs open on your laptop screen and not on the secondary monitor. If running XP, right click an open spot on des ... PC Desktops

A Open monitors


Replace the power cords ... AOpen Computer Monitors

How to open the back cover of Samsung SyncMaster 794mg CRT .


"Don't kill yourself just to save some bucks"Here are the instructions:http://www.josepino.com/?open-samsung-back-cover ... Samsung SyncMaster 753S 17" CRT Monitor

How to open a ACER AL1713 monitor


Hi - there are more hidden screws so you need to undo those:\015\012\015\012Where the stand joins on the back, there are two plastic bits either side of the pivot. They don't look as if they come off but if you squeeze them ... Acer AL1713 17" LCD Monitor

OPEN A BACK COVER ON MONITER


Hi im josh try this solutions of mine.\015\012Monitor Problems:\015\012\015\012THE COMPUTERS SEEMS TO BE WORKING, BUT THE SCREEN IS BLANK.\015\012- Check the monitor if turned on.\015\012 ... SAMTRON 55V 15" CRT Monitor

Relisys 17in tft monitor


Hi everyone, i have a relisys monitor and had this exact same problem where the menu screen comes on and then cycles through the various options until it gets stuck in a loop within the colours settings. - the solution i found ... Relisys TL 766 Monitor

Wont go to normal start up screen!!!


The screen that you're seeing is the self-test of the monitor, as it's already stated. It's commonly caused by having no signal coming from the computer to the monitor. You were advised to check the monitor cable, if you have already done that, then ... E-Machines eView 17f3 17" Flat CRT Monitor

Sam.SyncMaster750S control buttons not responding


First, be aware that the flyback xformer can carry a 50,000 volt charge that can arc to anything grounded. Unless you are possitive the chasis is not hot, I'd forgo pulling it apart.\015\012\015\012That said, if you turn the monitor on it ... Samsung SyncMaster 750S Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4965 seconds