Having problems with your Gateway PC Desktops ?

My emachine will turn on and run without doing anything. The monitor states no signal.


Answers :

Either the VGA cable (cable from your monitor to computer) or VGA port on your computer is faulty. Try connecting another monitor to your computer to determine the problem. If the other monitor works, then your VGA cable is faulty. If the other monitor doesn't work, the VGA port is faulty. Hope that helps.
Repair Help & Product Troubleshooting for Gateway PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My emachine will turn on and run without doing anything. The monitor states no signal.


Either the VGA cable (cable from your monitor to computer) or VGA port on your computer is faulty. Try connecting another monitor to your computer to determine the problem. If the other monitor works, then your VGA cable is faulty. If the other mon ... Gateway PC Desktops

I have a dell demension 4300 that recently started having issues, slow cutain effect, freeze ups. harddrive clicking away. Then one day I had the blue screen that said an error was detected. Then it wouldn't reconize the harddrive but it would go into the bios screen and then not do anything else. So I took it in to have it diagnosed and they said the edie circuit on the board was fried. They offered me a card option for the back but I opted to replace the motherboard with one that was listed as


CaSmogTech,There is a No Signal on the monitor because the monitor is not receiving a Video Signal.Your computer is not producing a video signal.In essence, your computer isn't working, because there is no Operating System on ... Dell Dimension 4300 PC Desktop

EMachines T6528 desktop will not boot up


The power supply fan runs from either 5V or 12 so that only tells you that the voltage for fan operation is present.\015\012\015\012If you don't have a multimeter already, I would highly advise that you buy one.\015\012They are available for &l ... E-Machines eMachines Desktop PC

I recently moved my computer into my new condo and have not been able to use it since. The problem seems to be with the monitor. I turn on the computer and the fan comes on but the monitor displays "no signal" and then goes dark but the light one the front still flashes indicating it is getting power. The last time I moved my computer from one room to another, the monitor suddenly couldn't/wouldn't display colors accruately - no red. Attempt to adjust the color by using the monitor's controls we


Lack of video signal is usually 1 of 3 things, Power supply (PSU), Video card or Motherboard (mobo).Situation #1: If you get a blank screen and no sounds or movement it either indicates that the power supply unit (PSU) has failed or somet ... E-Machines eMachines Desktop PC

Hello Sony RB30 w/ sdm-hx93 monitor. Approx. 7


Blond and Baffled, (CD), it's okay, I believe you have a common problem.The computer sends a video signal to the monitor. The monitor is working fine. Hence - No Signal.Monitor doesn't receive a video signal within a certain s ... Sony VAIO RB30C (VGCRB30) PC Desktop

Going to Sleep


Due to the power surge, it is highly possible that the monitor was given a boot by your computer on it's way out.\015\012\015\012This will short out a very small transistor inside the monitor on the video board and in turn, then monitor c ... HP Pavilion F1903 19" Flat Panel LCD Monitor

Computer turns on, no signal to lcd. Hard drive


The blue screen was caused by corrupted drivers or a virus that was corrupting the drivers. Have you tried starting the machine in SAFE mode? To do this press F8 while the computer is starting before Windows loads. ... PC Laptops

Comp makes a buzz noise and wont show any start up


Suggest you,A) Look at the back of the computer at the Power Supply fan, and tell me if it's spinning. (Where the power cord plugs in, is the Power Supply)B) Open the computer case, look at the Processor fan, and tell me if it ... PC Desktops

Computer in black screen, no energy outputted


A few possibilities(the only problem is if you never get any display to try many of these suggestions):\015\012\015\012-Suspend. With suspend, everything is put to RAM and the computer goes to low power state, shutting off USB, HD, and most other thi ... E-Machines eMachines T3830 PC Desktop

Dell XPS 730 no video, not bios, fan running hard


Fist touching anything on the motherboard without a anti-static strap can kill the motherboard.The fan running at full speed is no big deal. If you took out the video cardhow do you expect to see anything on the monitor. ... Dell XPS 730 Desktop Computer

Blank screen i have 3 samsung 740B 17" monitors its been 2 years and i have 2 down,both source buttons light up telling me power is good.ive tried different monitor with the same cpu and it works fine. i have 7 work stations at my work 4 have dell monitors running for 5 years +, and 3 are samsung,which i only have 1 left working now. only had them for 2 years. just woundering if theres anything i can try or are they garbage?


Hello\015\012I am a technician-informatic. I have repaired about 80 Lcd Samsung monitors with theese problems. I offer the repair manual.Manual has been done with the experience of the repairing Samsung Lcd monitors. Manual was made by m ... Samsung SyncMaster 740b 17" LCD Monitor

Dell E171FP Monitor goes black after 2 secs


Hi, I don't think the problem is with your monitor. Your monitor sounds like it's doing exactly what it's supposed to do. The monitor is supposed to turn off if there's no cable attached, which means there's no signal input. When the screen goes b ... Dell E171FP 17" Flat Panel LCD Monitor

Have everything running on computer no signal on moniter or beeps


Well if it wont display anything that means the chipset has been damaged somehow my hp pavilion did the same thing and i had to buy a new graphics card try opening up the computer and have a look if you see heat sinks in a square without a fan that w ... Acer Aspire T180 PC Desktop

Monitor stays on for a few seconds then goes out


This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

My pc beeped twice and nothing came


Lack of video signal is usually 1 of 3 things, Power supply (PSU), Video card or Motherboard (mobo).Situation #1: If you get a blank screen and no sounds or movement it either indicates that the power supply unit (PSU) has failed or somet ... Dell Dimension 2400 PC Desktop

Gateway LCD powers on but has no picture


I have a Gateway FPD1730 LCD monitor. When I plug it into my Gateway 500x desktop the power light turns green and then says "Power Saving Mode" and then it goes black. It will occasionally flash on and have a picture and then go off. When I unplug th ... Sceptre X9G Komodo IV 19" Flat Panel LCD Monitor

Powering up problems.


Try using another monitor that you know works. Then try another video card. The fans are running because the computer is running ---but the monitor is not. Green to Amber means monitor is not on.\015\012A lot can go wrong with loose wires that ... E-Machines eMachines Desktop PC

DV8309 power up problem: blue lights on for few seconds then off


The inverter inside the lcd panel is most likely your problem. Try removing the whole lcd screen from the laptop if you are capable and run it with the external screen to confirm. leave the lcd switch off (this lcd switch above the power button turns ... HP PC Laptops

Power outage,monitor wont power up,hope its not fried


I may or may not make your day. (But I wish you to know that I want to! lol!)I believe it's not your monitor, I believe it's your computer. (Oh, that helped, huh!) However, don't freak out yet, it maybe a simple fix.Let's test ... Gateway FPD2275W LCD Monitor

I have HP pavilion DV6500 laptop. Last night, system suddenly struck while working and now only power light is okay, and some blue lights also runs which shows sounds etc...DVD is working, but no sound of fan, keyboad not working and nothing showing on LCD screen..please solve my problem..


Please do not panic....The first thing what we need to do is perform a hard reset...What does Hard Reset mean... Unplug the A/C Adapter Pin from the notebook...Turn the notebook upside down and then remove the battery from the notebook...Turn the not ... HP PC Laptops

Emonster 600 won't boot up


You should not loose any information seeing that all information is held on your hard drive. As for changing out the processor, it seems pretty intimidating but is rather simple. When you have the side of the computer removed and can see into th ... AMD eMachines Desktop System w/ 17'' CRT Display, 2.0 GHz Athlon 64 3000+ (W3400)

Building a new PC, cannot get LCD to work


You MUST get into bios to set "initalise display first"selection.\015\012try alternatly pressing delete,or f1 keys toget into bios.\015\012one of the two will get you "in"\015\012\015\012then follow instructions at bottom of s ... E-Machines eMachines T3830 PC Desktop

ACER AL1716S 17"TFT Monitor


Hi, Mine was slow all so. I taken the side panel off and blow it out with a air hose. there was so much dust in it.It is running slow as well. It is very quite know and seems to be alot faster as well. your problem you are talking about i'am sure it ... Acer AL1715 17" LCD Monitor

No display on SyncMaster 710N


I used 2 resistor of 100 ohms (1/8W) to make one of 50 ohms. Like others instruction, just put the 50 ohms resistor between pins 5 and 6 of this chip and the problem is solved. ... Samsung SyncMaster 710N 17" LCD Monitor

Syncmaster 203B LCD not working with Vista 64


Try putting the graphics card from your old computer into your new computer. That is where I would start. ... Samsung SyncMaster 203B LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9511 seconds