Having problems with your Gateway MT6705 Notebook ?

When my gateway MT6705 tries to boot, blue screen

\015 When my gateway MT6705 tries to boot, blue screen with, UNMOUNTABLE BOOT VOLUME appears and turns off automatically. i have a windows vista operating system and when i try the original repair disk, it won't process. Is my hard drive damaged?\015

Answers :

Many\015\012times this error occurs when I have swapped a hard drive and used the\015\012wrong IDE cable to connect it. If your computer uses an Ultra Direct\015\012Memory Access (UDMA) hard disk controller, and you use a standard\015\01240-wire connector cable to connect the UDMA drive, you may experience\015\012this error. Make sure you are using the correct IDE cable.
\015\012
\015\012 Also, if\015\012your BIOS settings are configured to force the faster UDMA modes, this\015\012error may occur. In this situation, restart your computer and enter the\015\012BIOS and load the "fail-safe" default settings and reboot.
\015\012 \015\012 \015\012
\015\012 If neither of these issues are the cause for the Unmountable Boot Volume, then the issue most likely is caused by a damaged BOOT.INI file in the root directory of the boot drive or file system corruption.
\015\012
\015\012Follow the steps below to correct these file system issues:
\015\012
\015\0121) Start your computer with your Windows XP CD-ROM, or with Windows XP boot disks
\015\0122) When the Welcome to Setup screen appears, press R to Repair the installation using the Recovery Console
\015\0123) If you have a dual-boot or multiple-boot computer, select the Windows installation you want to access
\015\0124) Type the administrator password when you are prompted, if no administrator password is set then just press Enter
\015\0125) At the command prompt, type CHKDSK /R and then press Enter
\015\0126) Once CHKDSK has finished checking and repairing the hard drive, type EXIT and press Enter to restart your computer
\015\012
Repair Help & Product Troubleshooting for Gateway MT6705 Notebook

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When my gateway MT6705 tries to boot, blue screen


Many\015\012times this error occurs when I have swapped a hard drive and used the\015\012wrong IDE cable to connect it. If your computer uses an Ultra Direct\015\012Memory Access (UDMA) hard disk controller, and you use a standard\015\01240-wir ... Gateway MT6705 Notebook

Boot screen with vertical lines and random monitor idling


Reinstall xp ... Gateway GT5670 Desktop PC

Gateway FPD1750 monitor's keep go black screen, no picture at al


Tgordon60, If you know how those NEW "CURLIE-Q" energy efficient CFL light bulbs produce WHITE LIGHT, then you will know what makes an LCD display panel produce all the pretty colors and the WHITE BACKGROUND of the FIXYA web page!!! Only difference i ... Gateway Computer Monitors

Dont have recovery disks and have virus...actually just missing disk 2


If the popup you're getting is from something like "MS Antispyware 2009" or similar, that's the same trouble I've seen on several other computers. Download a removal tool called ComboFix. You can find information on how to use it and links to downloa ... Gateway 835GM (835GH) PC Desktop

My screen resolution is not like it's supposed to be.


The native resolution of you monitor is 1440x900. If you previously had it set at a lower resolution (say 1280 x 720) the text would appear larger than it does now. You can change the appearance of internet explorer by using the Zoom function (Ctrl + ... Gateway FPD2275W LCD Monitor

Gateway laptop screen is black?


This could have several causes, including malware installed on your system, but is frequently the result of some kind of hardware driver conflict. Have you recently installed any new hardware or software to your system? If so, disconnect it and try ... Gateway 7330GZ Notebook

Assist with an Operating System start issue? PC is a Gateway GT5228


The following will re-install windows without destroying your stuff but you must follow it exactly !!!!!!!\015\012\015\012Boot the computer using the XP CD. You may need to change the boot order in the system BIOS so the CD ... PC Desktops

Gateway M-6340u laptop won't boot


The gateway hang indicates to things either a bios problem or a failing hard drive,sometimes when hard drives start getting old they take a while to spin up and/or has difficulty finding the boot sector,you also have corrupt files which would indicat ... Gateway M6307 Notebook

Gateway 7330GZ Not Booting Properly


Unfortunately, I've seen this caused by both hardware problems (something on the system board) as well as software corruption in Windows.Try pressing the F8 key when you see the Gateway logo screen (press it three or four times). This sho ... Gateway 7330GZ Notebook

Blank Laptop Screen


The same thing began to occur on my (old as the hills) Dell Inspiron 2650 about 2 months ago. I have tried updating the BIOS to the newest Dell has for this laptop but it didn't help. I also tried to update the video drivers (no help), regressing t ... Toshiba Satellite 1410-S173 Notebook

Gateway MC7801U laptop with a broken screen


Hello\015\012\015\012Removing the palstic bezel is fairly simple. Use a plastic headed didle stick (radio Shack). 1st take out the battery, the harddrive, memory. 2nd Lay the unit screen side flat down but face up. Some versions of th ... Gateway MC7801u Notebook

Cannot connect to internet


First check ipaddress \015\012 Click Start -run- type cmd hit enter for XP or Start -search-type cmd hit enter in Vista. On the DOS black screen after the blinking cursor type ipconfig hit enter check the ipaddress if are getting ipaddress other than ... Fujitsu AMILO Pro V1000 Notebook

Gateway desktop xp starts then flashes blue screen for split seco


Sometimes they make the recovery disk with windows on it, but not the programs that start windows during the boot up phase. One of the three main files that boots into windows is corrputed or your Master Boot Record is missing. There are two options ... Gateway PC Desktops

Cannot get new Motherboard to boot up in Normal Mode


What u may have done is wwhen u were installing the new board, gave a static shock to the system...that will cause only the fans to come on and nothing more...this is a bad problem bc u cannot fix it...if u figure out something else is wrong, and it ... Gateway PC Desktops

I have a gateway MA7 and whenever i start it up it goes to the ''we wpologize for the inconvenience , but windows did not start successfully....'' screen. If I choose to start windows normally or from the last configuration that worked it goes to the windows xp screen and won't go past there. Any ideas on what might be wrong or how to get it to work?


I hate that screen. Everybody does. Thing is it know you hate it. It can sense your frustration. I recommend therapy. ";-}Ok seriously.Have you loaded any new software or perhaps downloaded anything lately? Yes It could be a virus o ... PC Laptops

Gateway Laptop W340UA black screen


\015\012take out the memory\015\012turn on again without memory (you should hear long beep sound) and turn it off again \015\012clean memory using eraser (better if you have spar ... Gateway PC Laptops

Monitor has no red in it


Hey Ya'll,Bad news. I have the same set up with the same problem and it's awful. The odd color of the monitor is due to a bad nVidia GeForce 6100 video card. You'll have to cough up the cash for another PCI graphics card. Also, the FP ... Gateway FPD1975W 19" LCD Monitor

I spilled a fairly small amount of beer on my gateway


You might be able to do it yourself, though in the worst case there are companies that replace motherboards for about $150. The problem you are experiencing may be a display inverter problem, the easiest way to test this is to connect the laptop to ... Gateway M-1625 Notebook

On a six year old Gateway 310x whenever I turn it on the screen says 'We apologieze for inconvenience ... then offers various prompts for Safe mode, etc. I have tried each one and the same Gateway screen, then WindowsXP screen, then the 'We apologise ... "screen which keep looping. They only stop when I trun of the system using the power button. I cannot find the original Windows XP installation disk to do a clean install. What should I do?


Sounds to me like you have gotten a virus or some other type of malware causing your system files to get corrupted. Unfortunately without a clean install disk you may not be able to recover your system. Question though, when you restart and get to ... Gateway 310 X (310XSP) PC Desktop

Gateway 400 VTX tries to power up then shuts off no screen activity


First try reseating memory,if still not try another stick,if still no try removeing the cpu and reseating it,this has worked for me many times in the past. ... Dell Inspiron 8500 Notebook

Monitor goes into power saver mode


Take your Agp card with you to the shop. You do not need to go through Gateway, but there are serveal formats of AGP regarding the voltages.\015\012\015\012By the sounds of it you have the newer version of AGP so finding a replacement car ... Gateway 500 X PC Desktop

I have the HERMO packard bell model. I can hardly access internet and the sound is not heard. Please hhelp


For internet \015\012Resolution: \015\012 First check ipaddress \015\012 Click Start -run- type cmd hit enter for XP or Start -search-type cmd hit enter in Vista. On the DOS black screen after the blinking cursor type ipconfi ... PC Laptops

Gateway desktop starts and makes one beep. logo on screen with the word Gateway. Options are F2 & F10. If you act immediately (press F2) the computer will go into bios. After saving bios computer will exit and screen will go blank monitor will shut down (no signal). If you do nothing the computer will set at logo screen indefinately. How can I make it complete boot?


Hi there\015\012\015\012This sounds like a BIOS or graphics card initialzation issue.\015\012\015\012Can you try entering the BIOS, and then use the option to reset all BIOS settings to factory defaults. Then save the settings ... Gateway E-4100-F2 PC Desktop

Computer will not get past the BIOS screen


It sounds like a problem regarding the POST process (power on self test) which is the first thing your computer does when booting up when testing the components that make up your system to make sure it has what it needs to start booting. which in you ... PC Desktops

Trying to do a full factory recovery on an M Series gateway note


If you want to do the factory recovery, 3 ways to do the system recovery\015\012 First way\015\0121 login to windows\015\0122.click Start\015\0123. click All programs\015\0124. click Gateway\015\0125. click gatewa ... Gateway MX6447 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8055 seconds