Having problems with your Gateway HD2200 LCD Monitor ?

Same There is just something wrong with the backlighting. I have the same exact problem as everyone else except if i turn my monitor on and off about 20 times it will eventually work untill i turn it off for more than 2 or 3 hours. If you turn it on and you see the backlight and then everything blanks out, you can look very closly at your monitor and see your login screen or desktop or whatever you had up. I was able to logg in and open progames, but still completely unusable as i had to sit 2 i


Answers :

Hi There
\015\012
\015\012If you feel comfortable to take the back off and check for loose connections or dry joints if you dont understand what im saying you may be better finding a local techie, tv repairman or radio ham to have a quick look
\015\012
\015\012Regards AL
Repair Help & Product Troubleshooting for Gateway HD2200 LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Gateway monitor FPD1975W won't display


Same problem - unplug both computer and monitor - hold power button for monitor for 15-30 seconds...then power it back on and then power on the computer. Seems from other sites there is a power issue with the monitor - this worked for me. ... Gateway FPD1975W 19" LCD Monitor

My Fujistu Amilo laptop screen is blank, I can see nothing though I laptop seems to have booted and using a combination of tab and enter I have heard the windows login dingle. How can I work out if it's the screen or the backlight and how can I make it use the second monitor I have plugged in.


Hello there,If the backlight is out, the screen image will still show up but there is no light to shine through it so you can normally see it.The test that I've used is to get into a bright area(outdoors on a sunny day) and angle the scre ... Fujitsu Siemens PC Laptops

Lcd montor not working help - Samsung SyncMaster 920NW Monitor


Hi there,\015\012Symptom : No images on the screen. I cannot turn on the monitor.\015\012\015\012Checklist 1 : Is the power cord connecte properly.\015\012Action : Check the power cord connection and supply.\015\0 ... Samsung SyncMaster 920NW Monitor

Only 3/4 of the screen is being shown...


Ok so I have actually had this happen to me before. My best guess would be that it is a problem with the video card. There may be some video drivers that you need to download. The other explenation might be that the video card over heated.\015\ ... Mag Innovision LT776s 17" LCD Monitor

Acer AL1716 LCD monitor -- black screen


Delete your graphics driver and re Install it if you are using vista then its the Auto Adjust setting on the monitor turn it off re boot holding down delete key then check cmos and bios setting to see if your monitor is installed or is it a generic P ... Acer AL1716 17" LCD Monitor

Power supply done but display is not


Hi there,\015\012\015\012Symptom : No Image on the screen. I cannot turn on the monitor.\015\012\015\012Checklist 1 : Is the power connected properly ?\015\012Action : Check the power cord connection and supply. ... Samsung SyncMaster 753S 17" CRT Monitor

My Dell optiplex 170L keeps turining off and then


Possible that it's caused by a faulty hardware or a computer virus on your computer. For us to isolate the issue we must start troubleshooting with the hardware1. Remove all the connection at the back of your computer2. Power cycle ... Dell OptiPlex 170L PC Desktop

LG Flatron L1932TQ won't turn on


I have the exact same problem. Just like Ptepe, I also found the 680uf/25v and 1000uf/16v capacitors in positions c203 and c204 on the Power Supply PCB to be bulging on the top. I considered replacing all of the electrolytic capacitors on the board, ... Gateway FPD2275W LCD Monitor

My 15" LCD monitor TTX went to sleep mode and never return back


Mike_garzan, Your monitor will need some work done on it!! Do you know the "flashlight trick" that every owner of an LCD monitor with "cold cathode-fluorescent-lamps" should know how to do when the BLACK screen of death makes it presence known? Do th ... Elo TTX 9154 15 Inch LCD BLACK W/ RESISTIVE SERIAL Interface Monitor

Screen display is hard to see, it was working fine and the all of a sudden I can hardly see what is on the screen. Remote login to the laptop everything is working great.


Hi there,\015\012\015\012You may try the following;\015\0121) Is the monitor plugged in to the wall and computer?2) Is the monitor turned on?3) Have you checked for bent pins on the monitor?4) Does the computer wor ... Compal EL81 Notebook

Lcd monitor power light flashing with no img. seems 2 be frozen


The display is in safe mode and you will need to reset the display to get the display out of the safe mode. There are 2 different model revisions. Please choose the method that will match your revision. Depending on the revision of the monitor, one ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

Monitor black screen


I experienced a similar problem with my MAG LT776s. As a "band-aid" fix, I have found that if I turn the monitor brightness to near zero my problem is minimized. Meaning - the monitor goes on after a little wait (~ 20 sec) and will stay on. ... Mag Innovision LT776s 17" LCD Monitor

Hp monitor with screen with not say on, a black screen appears. Upon turning the monitor on and off I can see a flash of the login screen but it does not stay, the screen goes black in a flash.


There might be a problem in your monitor. replace the monitor with a new working monitor. ... PC Desktops

Dell Latitude LCD screen is dark, but computer is still working.


It sounds like the backlight has burned out. The faint light you are seeing is ambient light in your room being reflected through the LCD. Try it in a perfectly dark room and see if you can see anything on the screen.\015\012\015\012The following p ... Dell E173FP 17" LCD Monitor

Monitor will not turn on- was working fine a week ago!


Hi this is the way how to examine\015\012what's wrong with your LCD monitors. After you turned it on and the screen\015\012went gray or stopped working, you have to check that if you can see the image on the screen or\015\012not by shining a fl ... Gateway FPD1960 19" Flat Panel LCD Monitor

Same There is just something wrong with the backlighting. I have the same exact problem as everyone else except if i turn my monitor on and off about 20 times it will eventually work untill i turn it off for more than 2 or 3 hours. If you turn it on and you see the backlight and then everything blanks out, you can look very closly at your monitor and see your login screen or desktop or whatever you had up. I was able to logg in and open progames, but still completely unusable as i had to sit 2 i


Hi There \015\012\015\012If you feel comfortable to take the back off and check for loose connections or dry joints if you dont understand what im saying you may be better finding a local techie, tv repairman or radio ham to have a quick ... Gateway HD2200 LCD Monitor

AG Neovo X-17a


Hello,It sounds like you have a monitor with a common problem. After a few years some LCD monitors\015\012will blow a power supply. The problem is caused by parts called\015\012capacitors overheating in the confined space of the monitor. ... Neovo AG 17" LCD Monitor

Trubleshoot Motherboard what is mother board prob and how can find n fix them....


More than 70% of all computer problems are related to cabling and connections. Ensure all cables are connected and connected firmly. IDE and floppy ribbon cables and power cables can often go loose. Ensure microprocessor, memory modules, and adapters ... PC Desktops

Monitor / LCD screen unresponsive to computer.


From what you've told us, It sounds like your LCD screen. The first thing to do is to to beg, borrow or steal a desktop monitor and plug it in to the proper port on the laptop. Turn it on and bring the system up. If this works, you can be pretty s ... Compaq Presario X1000 Notebook

Moniter stays blank


I used to repair LCD flat screen from Dell. I am not sure that my method might be applicable to your CRT monitor. Anyway this is how to examine what wrong with the monitor. You have to\015\012check if you can see the image on the screen or not after ... Relisys RLT1720 17" LCD Monitor

Screen Not Staying On


Hi TontBrowne,\015\012\015\012I'm not sure exactly what causes this problem. However it seems that lowering the 'Brightness' and 'Contrast' fixes things. The problem is, you can't see the menu without the backlight. However, try this, as ... Dell Dimension 4600 PC Desktop

We have Dell OptiplexGX745 smallform factor desktop computers that we need to run two monitors.


If your Dell Optiplex GX745 came with the ATI Radeon X1300 graphics card, that has One - DVI graphics port, and One - VGA graphics port, it's no problem.This link shows an ATI Radeon X1300, and the two above mentioned graphics ports, ... Intel computers9: P3 Computer Computer (Reconditioned) (CSINTELP3) PC Desktop

Eee pc won't turn on (I think have already posted this,not sure)


Sounds like a classic case of hardware failure!!!!!!! possibly your motherboard, start by removing the battery, hard drive and optical drive.disconnect the laptop monitor and connect the laptop to an external monitor.remove the memory mod ... ASUS Eee 4G Notebook

Monitor goes blank less than a second after turning on.


If you put bright light at an angle close to lcd can you see a windows shadow, text icons etc, ie still logic power passing,then .... (from a.n. other) after two weeks searching I finally find doctor living stone http://www.aplusperfect.com/articles/ ... Dell E176FP 17" LCD Monitor

Nothing on the screen after power on


Turn on the computer and complete the following steps:\015\012Step 1: Check cable connections\015\012(If you can see the initial HP or Compaq logo screen but later lose the picture, you can skip to Step 2.)\015\012check the video cable connection on ... HP Compaq FP 7317 17" Flat Panel LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7586 seconds