Having problems with your Gateway GT5220 PC Desktop ?

When I turn boot up my gt5220 the monitor briefly flashes and then goes into power saving mode- desktop stays on, fans running and all, until turned off by holding power button down or unplugging it.... my gateway 820GM started doing the same thing, monitor just going into power saving mode.... but the monitor is fine, works on a dell desktop, and the dell monitor works on my gateway- so does an older EV700 monitor....WTF??? video card? motherboard? driver update? power source? heard 15 differen


Answers :

In this case if you monitor say no input or no signal it means the\015\012monitor connector cord are not connected properly to the motherboard.\015\012Or if you have a video card you need to plug your monitor connector to\015\012the video card. Because if you a video card and the monitor cord are\015\012connected to the motherboard the monitor will not be display. So check\015\012the monitor connector if it is correctly connected.
First try to connect another power source if it does work that is good then try the other options 1- rams 2- vga card 3- cpu 4- of course there is always the motherboard option....
i had the same problem several times mostly it is the power supply ( the power source ) sometimes gives a weak voltage or amps....
Repair Help & Product Troubleshooting for Gateway GT5220 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Gateway LCD powers on but has no picture


I have a Gateway FPD1730 LCD monitor. When I plug it into my Gateway 500x desktop the power light turns green and then says "Power Saving Mode" and then it goes black. It will occasionally flash on and have a picture and then go off. When I unplug th ... Sceptre X9G Komodo IV 19" Flat Panel LCD Monitor

When I turn boot up my gt5220 the monitor briefly flashes and then goes into power saving mode- desktop stays on, fans running and all, until turned off by holding power button down or unplugging it.... my gateway 820GM started doing the same thing, monitor just going into power saving mode.... but the monitor is fine, works on a dell desktop, and the dell monitor works on my gateway- so does an older EV700 monitor....WTF??? video card? motherboard? driver update? power source? heard 15 differen


In this case if you monitor say no input or no signal it means the\015\012monitor connector cord are not connected properly to the motherboard.\015\012Or if you have a video card you need to plug your monitor connector to\015\012the video card. Becau ... Gateway GT5220 PC Desktop

Blank Laptop Screen


The same thing began to occur on my (old as the hills) Dell Inspiron 2650 about 2 months ago. I have tried updating the BIOS to the newest Dell has for this laptop but it didn't help. I also tried to update the video drivers (no help), regressing t ... Toshiba Satellite 1410-S173 Notebook

Old monitor not recognized by new computer, stuck in power save.


... Dell UltraSharp 1704FPT 17" Flat Panel LCD Monitor

Computer screen goes into "digital power saving mode"


You should be able to adjust the settings on the monitor to prevent it from going into power save mode, or at least to delay how long it takes before it goes into power save mode. Press the menu button and look for settings that might disable or chan ... LG L1915S 19" LCD Monitor

I have a Dell Inspiron 530


I have a Dell Inspiron 530S, and it exhibited the same symptoms as rguggemos's & Wilburollie's.I can put it to sleep, but when I try to wake it, it won't. The screen will stay black. I can hear the drives spin up, and the fans go on F ... HP Media Center m7060n PC Desktop

Gateway monitor FPD1975W won't display


Same problem - unplug both computer and monitor - hold power button for monitor for 15-30 seconds...then power it back on and then power on the computer. Seems from other sites there is a power issue with the monitor - this worked for me. ... Gateway FPD1975W 19" LCD Monitor

Gateway FPD1960 TFT works with laptop, not desktop


Good job elbtax, but did you use low esr capacitors? if not your monitor will not continue to work for long. The solder joints that you repaired actually do not dry out but crack after many heat/cool cyles. this is a common problem in electronics ... Gateway FPD1960 19" Flat Panel LCD Monitor

Dell S2409W lcd monitor won't come out of power save mode


Since this is a desktop and not a laptop here is my suggestion,\015\012 When booting your machine at the boot screen continuously press the F10 key to bring up your cmos settings.\015\012 One of the tabs when the screen opens will be for ... Dell E193FP 19" LCD Monitor

Dell Monitor Power save mode activate using pc


Yes right click on desktop select properties then click on screen saver then increase wait time problem will solved ... ViewSonic VE155b 15" LCD Monitor

My 15" LCD monitor TTX went to sleep mode and never return back


Mike_garzan, Your monitor will need some work done on it!! Do you know the "flashlight trick" that every owner of an LCD monitor with "cold cathode-fluorescent-lamps" should know how to do when the BLACK screen of death makes it presence known? Do th ... Elo TTX 9154 15 Inch LCD BLACK W/ RESISTIVE SERIAL Interface Monitor

Dell E152FP monitor goes black at startup, but not permanently


My bet is that your monitor is on it's way out. If this is true, it will get worse until it gets to a point where it no longer works at all. Connecting the monitor to another computer should confirm my suspicion. The monitor has probably developed a ... HP W2007 LCD Monitor

L1932TQ Fails on Desktop, works on Notebook


It simply means that your cpu is not giving back signal to your monitor to process, in fact, it is a cpu problem that is why there is nothing to display in your monitor.Your cpu froze because of that usb thing. the only way to unfreeze it ... LG L1932TQ LCD Monitor

Problem w/Dell E176FPf monitor stuck in power save mode


Ok if it the monitor works fine on another unit discount it out of the equation as a monitor problem.I would suspect the driver on the PC that delivers the problem, especially the video card.. Check that the cable is also on tightly. remo ... Dell E153FP 15" LCD Monitor

LG LCD Monitor won't exit Power Saving Mode


Does your desktop/PC display show anything before the monitor goes into power save mode? If nothing comes up, its possible that you have a loose VGA connection or that your video card/ ... LG Computer Monitors

Cannot get new Motherboard to boot up in Normal Mode


What u may have done is wwhen u were installing the new board, gave a static shock to the system...that will cause only the fans to come on and nothing more...this is a bad problem bc u cannot fix it...if u figure out something else is wrong, and it ... Gateway PC Desktops

Blank Laptop Screen


Unplug everything from your laptop unplug the power from the laptop close it and turn it over remover the battery open and hold the on button(battery is still removed) for a 10 count, replace the battery\015\012turn on you can plug the power co ... Gateway MX6956 Notebook

I have a dell inspiron 9300 with win xp pro for an os, my lcd screen is broke, so i took it off completly. now i am trying to hook up an benq fp567s monitor through the vga output. it will get me as far as desktop screen just after boot up. & most of the time it goes in to sleep mode before start up is complete. the screen suddenly displays "no signal" ?


Many people have noted two primary failures with this monitor. i have a couple time-saving troubleshooting tips, which actually apply to mostly all electronic devices. first, of course, bulging electrolytics [capacitors] should be considered suspect. ... BenQ FP567s 15" LCD Monitor

Dell xps m1530 formatted hdd now it wont boot


You might find part of this general trouble shooting process might help? Especially the part of changing you Primary Boot drive so you can load Windows.\012\012Assuming you are Windows based and not knowing your specific OS? \012 Your p ... Dell XPS M1530 Laptop

Monitor quit working today. Won't come out of power save mode.


Two options it is bust, get a new one, before it blows away your desktop unit as well, it has locked into system shut down and you might be able to restore it if connections and desktop software OK ... the latter may be dangerous ... get advice servi ... MegaVision MV220 Monitor

My Samsung 943N LCD monitor will work for 1 second and then goes black. When I choose the extended desktop option, for example, it will flash my desktop on the monitor for a second and then go black. I have 2 cords that I have tried this with and it happens with both...and I have 2 computers I have tried it with and it hasn't worked with either...so it definitely appears to be a monitor issue. Because it works for a second I am really confused with what it could be (it's not the graphic card obv


Becky_bitz, Do this first! It is only a "rude&crude" evaluation of the state of the monitor's "switch-mode-power-supply" Reconnect 943N to a fully booted KNOWN GOOD pc that has WIN-desktop showing. Then and only then, turn on the 943N and note w ... Samsung 943N LCD Monitor

Dell 4700 sleep on bootup


Ok here's what i can suggest. Two things.1. Check your power settings by going to the Control Panel and then going to Power Options. Take a look at the power schemes..specifically the option where it says turn of monitor...you can select the ... Dell Dimension 4700 PC Desktop

Dell SP2208WFP Flat Panel Monitor goes straight to power save mode


If the monitor is not turning blue that means it isn't picking up on the signal that is coming to it.\015\012Pushing the power button on the monitor should make the monitor work and give you a no signal note if it isn't getting signal.\01 ... Computer Monitors

Monitor keeps hibernating, can't make it stop, pixel issue.


Hey,\015\012\015\012I think this is more of a problem on your computer instead of the monitor, ofcourse you could try another monitor and see if the same happens. I suspect your computer goes into standby or hibernation on its own, and it ... Dell Dimension 8400 PC Desktop

Dell Monitor shuts down with "entering power save mode" command


There are times when you need to install software for a monitor to work with a PC. If you have the software disk that came with the monitor, you can try to install. You can also try changing the power cord to the monitor. Generally, power cords ... HP Pavilion a810n (PP164AA) PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.4262 seconds