Having problems with your Gateway GT5028 PC Desktop ?

No signal will come from the monitor

\015 Gt 5028 no signal will come from the monitor, changed video card\015

Answers :

Check the bios, which is at the beginning when you first turn on the pc and you press the delete or F1 key at a certain time to enter cmos, or bios. once in the 'bios ensure that the primary video card option is indeed your actual card ie. that if you have a onboard card you have onboard selected or agp for agp and pciexpress for pci express. If this still does not help then, perhaps remove the battery from the mother board and reset bios...***make a note of all the settings in bios first because if you did not personally build the pc then changing settings could have adverse reactions....

most times if a pc was working and lightning did not kill it, and it was not mistreated like with water or beaten I can resurect any system but I start at the beginning, without anything on the system then add things starting with HD then cdrom, then OS and vid card...then more RAM....


Repair Help & Product Troubleshooting for Gateway GT5028 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor comes up shows "acer" then says no signal and goes black


The interface between the monitor and the cable might need replacement. Please check it. ... Acer AL2016 W 20" TFT LCD Monitor

My monitor will not come on when power is applied automatically. the monitor does not come up when my system comes on. I just replaced the monitor which i swapped same exact monitor, but this one will not boot when the system comes up.


Please work through the following steps to troubleshoot your no power problem with a ViewSonic Monitor:\015\012\015\012Troubleshooting Power Issues: \015\012\015\012Disconnect and securely reconnect ... ViewSonic E70f 17" CRT Monitor

I have a dell demension 4300 that recently started having issues, slow cutain effect, freeze ups. harddrive clicking away. Then one day I had the blue screen that said an error was detected. Then it wouldn't reconize the harddrive but it would go into the bios screen and then not do anything else. So I took it in to have it diagnosed and they said the edie circuit on the board was fried. They offered me a card option for the back but I opted to replace the motherboard with one that was listed as


CaSmogTech,There is a No Signal on the monitor because the monitor is not receiving a Video Signal.Your computer is not producing a video signal.In essence, your computer isn't working, because there is no Operating System on ... Dell Dimension 4300 PC Desktop

Dell 2407WFP Monitor losing signal and having colored line artifacts


... Dell UltraSharp 2407WFP 24" LCD Monitor

Screen comes on says Acer then No Signal, and goes out. if shut power off and then back on get same result.


This means the monitor believes it's not connected to the computer. Verify the cables first of all. Then try booting in safe mode (F8 key at PC startup) in order to verify that the PC is sending data to the proper video port (you might have a dual VG ... Acer AL2223W 22" LCD Monitor

Dell SP2208WFP Flat Panel Monitor goes straight to power save mode


If the monitor is not turning blue that means it isn't picking up on the signal that is coming to it.\015\012Pushing the power button on the monitor should make the monitor work and give you a no signal note if it isn't getting signal.\01 ... Computer Monitors

Monitor comes up shows "acer" then says no signal and goes black


This Problem is Acer(s) Monitors. Though it is a nuisance one fix That has work for many is the Unplugging after it goes back to Good (viewable) screen. I have hooked mine up to an inexpensive Power strip to make it easier for me and just turn ... Acer X241Wsd Monitor

Black screen on acer 242lc lights come on power up


You indicate that the lamp for Power On comes on? (Light bulb icon) What about the harddrive activity lamp? (Media Activity icon. Looks like a book. Third icon going right, from Light bulb icon) Is this lamp lit up? (May flash ... Acer TravelMate 242LC Notebook

Monitor comes up shows "acer" then says no signal and goes black


1 Take the monitor out to the street \015\0122 Raise above head \015\0123 Hurl it twards the ground\015\0124 Release \015\0125 Watch peices fly everywhere \015\0126 ... Acer AL1916W 19" LCD Monitor

Lcd monitor power light flashing with no img. seems 2 be frozen


The display is in safe mode and you will need to reset the display to get the display out of the safe mode. There are 2 different model revisions. Please choose the method that will match your revision. Depending on the revision of the monitor, one ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

I have a pavillon a6421 uk hp computer when i turn it on the monitor comes up with no vga signal (i have changed the graphics card and it is still the same) have done all the trouble shooting options but nothing works can any one help please thanks simon


HiFirst Check the power cable of ur monitor whether power is coming or not..Then remove signal cable (which is connect the cpu) and then switch one the power, check whether any msg is coming in screen.(like no signal or no con ... PC Desktops

LG StudioWorks 700s Monitor NO SIGNAL


First of all I would check your video card. Do you have another monitor that works fine? If so I would hook the good monitor to your video card and see if you are getting a signal. If you still do not have a signal in the good monitor there is someth ... LG Studioworks 700S 17" CRT Monitor

No color red displays.


If you think that electronic repair is very difficult to learn then you have to read this article where only by using a solder gun could solve a Monitor color problem. Of course there were many tough dog cases (very difficult to find out the fault) i ... ViewSonic G70fmb (Black) 17" CRT Monitor

I get "No Signal" shortly after the computer is turned.


There is a problem by the programming chip insifde of monitor. It can be faster fixed but only by an expert. If i've help you, please rate me! Thanks ... Acer AL1916W 19" LCD Monitor

Emachine destop not recognising acer lcd monitor


It sounds more like the computer isn't starting up. The "no signal" message is coming from the monitor itself to tell you it's on but there's nothing coming in to display. Normally no special drivers are required for the monitor, and you'd see at lea ... Microtek C593 15" Flat Panel LCD Monitor

Why won't the HD channels come in on my lg flat screen monitor? We changed the cable box and everything. Any suggestions?


The first thing you need is the HD tuner. Since you stated that you changed the cable box I will assume that means it's HD ready. So you have HD signal coming in to the cable box box by-way of a coaxial cable. Now you need to get that HD signal ... LG Computer Monitors

I cannot restart my PC AllI get is a note saying NO SIGNAL ANALOG


I had a problem like that ,my tower got bumped and fell over. the heatsink and processor fell off. i had to remove processor (p4) from heatsink and make sure all the pins were straight and aligned properly. i cleaned both parts with alcohol. i then ... Gateway GT5058 Desktop PC

"No signal" error message, then monitor turns off, then on again


Replace your graphics card (VGA CARD).. ... Acer AL1917W LCD Monitor

My monitor cannot pick up signal.


If your monitor displays No Signal, it means there is no video signal coming from the computer. Monitor is working fine.It may just be the monitor cable. Do you have another one, or one you can borrow from another computer, for a test? ... HP L1706 17" LCD Monitor

When i turn on my computer all it tells me is sva no signal input please check video signal


No Signal. No signal coming from the computer.The monitor is working, but there isn't any video signal coming from the computer.1.Could be a bad video cable. The one from the monitor to the computer. Do you have another ... SVA-USA VR 17S 17" Flat Panel LCD Monitor

Computer monitor comes on for 1 seconds, flashes "analog power save mode" and then goes black.


Most monitors will say "Power save mode" when they can tell through residual voltage that the signal lead is plugged into a machine, but there's no picture being transmitted. The four states of a monitor are:* Off entirely.* Switch ... PC Desktops

No signal to monitor. Cable is fine and so is the Video Card -


Very vague question, but I'm assuming your computer is not a Mac, is turned on (as well as the monitor) and you are getting a no signal display on the monitor. I am also assuming if you move your mouse or press the keyboard, the display ... Impression Products Impression 7LSP 17" LCD Monitor w/ Speakers

HP desktop monitor problem


Hi try this ,,,\015\012\015\012\015\012Ensure the video cable is connected (and connected to the correct video port).\015\012\015\012Turn off the monitor using the monitor's power button and then restart th ... HP Pavilion a305w (DM181AR) PC Desktop

Desktop monitor port not working. processor, keyboard, mouse all powered on & working, you can hear it boot up. I use this with other computers, it works fine. monitor has power but goes to sleep. Is there another way to connect monitor with a different adapter, as usb port or to serial port?


Ha, no kidding! I just had a HP Pavilion a705w come in for repair at my shop!Small world.Okay, let's go with your theory that the power supply is okay, and the Processor is indeed operating.Your theory is that the ... PC Desktops

Power button blinks - won't turn on


When the power light blinks, it indicates in PC mode that there's no PC signal (depending on the monitor, it could be the sync signals or a combination of sync and video.)You SHOULD be able to hit the source button to see if the monitor t ... Samsung SyncMaster 150MP Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4549 seconds