Having problems with your Gateway FPD 1730 17" Flat Panel LCD Monitor ?

Everything is plugged in and turned on. worked two nights ago. was shutoff and has not been used during that time. lcd light is orange. if unplug says self-test. what else can i do


Answers :

Most likely a cable or video card issue. If its a video car, try hooking it to your computers motherboard vga spot. If it works then you know its a video card. Another thing to try is to run another source to it. When its lit orange, thats a standby mode meaning its not recieving a signal from the source. Good luck.
Repair Help & Product Troubleshooting for Gateway FPD 1730 17" Flat Panel LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Everything is plugged in and turned on. worked two nights ago. was shutoff and has not been used during that time. lcd light is orange. if unplug says self-test. what else can i do


Most likely a cable or video card issue. If its a video car, try hooking it to your computers motherboard vga spot. If it works then you know its a video card. Another thing to try is to run another source to it. When its lit orange, thats a standby ... Gateway FPD 1730 17" Flat Panel LCD Monitor

ACER AL1914 LCD Monitor goes black but green light stays on


The monitor is doing a self test a finding an error.\015\012The lcd has three parts, the screen plate(windows)/the logic(vga)/the\015\012inverter(power plug). Parts that go are the backlight ccfl's, behind\015\012the plate, and parts of the inv ... Acer AL1914 19" LCD Monitor

Monitor powers on for approx 8 secs then standby.Series of vertical stripes on panel but no image.Guessing the lcd is at fault?


When I applied the solution below, I go stripes when poorly reconnecting the logic board to the plate, and the plate ability to do it job can be effect by bits going on the inverter, wavely screen output etc. The lcd is an assembly kit inside have a ... iiyama ProLite E434S 17" LCD Monitor

My monitor shuts off(goes blank for a few seconds


The monitor is doing a self test a finding an error.The lcd has three parts, the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, ... LG L1915S 19" LCD Monitor

Philips 190S monitor - Urgent!


The lcd has three parts the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, all three take a bit of power from the inverter. The self t ... Philips 190P6EB 19" LCD Monitor

When it powers up the screen is fine then it goes black with no signal box, then if you turn it off and on again screens comes back for few seconds and then off again, sying no signal. Viewsonic LCD monitor VP720b


The lcd has three parts the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, all three take a bit of power from the inverter. The self t ... ViewSonic VA720 17" LCD Flat Panel Monitor

Gateway monitor FPD1975W-UK screen fuzzy lines for a few seconds blue on & off light flashes on and off then screen goes blank also a small current coming through the pc connector cable.


The lcd has three parts the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, all three take a bit of power from the inverter. The self t ... Gateway FPD1975W 19" LCD Monitor

I have a proview PA-19DKS MONITOR. It hasn't been hooked into a computer yet. But it has been hooked up to cable so my daughter can watch cartoons.Recently, when it is turned on it shows the blue screen for a few seconds and then goes completely black. What could be the cause?


The lcd has three parts, the screen plate(windows)/the logic(vga)/the\015\012inverter(power plug). Parts that go are the backlight ccfl's, behind\015\012the plate, and parts of the inverter, ie capacitors, all three take a\015\012bit of power from th ... Proview PL913S 19" Flat Panel LCD Monitor

Monitor stays on for a few seconds then goes out


This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

My Dell won't charge,


Yes, it could be very true. A lot of electronics will still work somewhat, even though the power cord is faulty. An example would be the Xbox 360. The three orange lights error is most of the time, the power cord. But the manufacture will ... Dell Inspiron 1525 Laptop Midnight Blue

Massive series of problems with IBM Thinkpad


Probably itz either minor case of software corruption/improper ground/cpu fan..or major case of faulty or defective main board/ram/addon/daughter cards....plz do check the following as in order:..the Hardwa ... IBM ThinkPad R40 2897 Notebook

Toshiba 5205-s503 won't start up


In my 15 year career in electronics, among other companies, I have most notably worked for United Technologies as Test Engineering Technician and as an Electronic Failure Analysis Technician for Jabil (Circuit.) I am unemployed due to US electronics ... Toshiba Satellite 5205-S503 Notebook

I have a Cornea 1702. It just stopped working altogether. It doesn't even show the menu nor does it search for a signal as it used to while scrolling thru options or select input! I think it's fried, but I remember some time ago i thought it was all done then it started working again. any thoughts?


OK, first off, I'd like to say that I've never worked on the Cornea 1702, but most monitors follow similar designs, especially generic brand monitors.So there are a few things I need to know: What exactly happens when you press the ... Cornea CT 1700 17" Flat Panel LCD Monitor

Power outage,monitor wont power up,hope its not fried


I may or may not make your day. (But I wish you to know that I want to! lol!)I believe it's not your monitor, I believe it's your computer. (Oh, that helped, huh!) However, don't freak out yet, it maybe a simple fix.Let's test ... Gateway FPD2275W LCD Monitor

No display lights


Run the PSA Diagnostics and Obtain the PSA Error Code \015\012To run the PSA diagnostics and obtain the PSA error code, perform the following steps:\015\012Shutdown the computer.\015\012Press and hold the <Fn> key, ... Dell Inspiron 9100 Notebook

Start up problem


Generally, that loud beep you hear is your BIOS (the part of the \012computer that turns on everything else) alerting you that there is a \012serious error with it's ability to function. Just for example, the beep \012could be due to your RAM not bei ... HP Pavilion dv2000t 14.1" Notebook Laptop PC (Intel Core 2 Duo T5500 1.66 GHz, 1GB RAM, 100GB HDD, D... PC Notebook

HP DV2503TX LCD won't turn on


Doesnt seem to be the screen by the sound of things...first of all splitting into 8 screens is not motherboard problem neither is blue screen..\015\012if you have bad sectors on hd screen wont come on...\015\012if have faulty mem cards wo ... HP Pavilion dv2000t Notebook

My acer travel mate 5710 just blipped and closed down. NOw will not even switch on. any advice how to fix? The green power light does show for one half second when I press the button but does not function to 'on' mode.


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... PC Laptops

My hp compaq nc6400 doesn't turn on. the green


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... HP Compaq nc6400 Notebook

I have power out of adapter but laptop is completely dead; no lights come on at all.


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... Toshiba Satellite A45-S150 Notebook

Acer will not boot up even with it being plugged in, no lights, noise, nothing


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... Acer Aspire 5100 Notebook

My Toshiba Satellite 2415-S205 is dead as door nail, no lights, etc. I checked power supply, power jack and connection on board, all is OK. Now what, send into the shop for repair? Ted


Here are some suggestions I compiled, some you have done, thought I would throw it out there for you...\015\012\015\012 ... Toshiba Satellite 2415-S205 Notebook

Dell Inspiron Vostro 530s won't boot.


Hi,I work for Dell, If the power button led light is flashing amber or amber (the Power supply is faulty) The Yellow light you saw inside the motherboard is the "Flea Light" (that is one way you could check if there is still power on the ... PC Desktops

My loptop is an Averatec 7100. How can I test the motherboard? I took it to a computer repair shop and they said is the motherboard, I want to know how can I test it on my own.


This is more of a system diagnosis that an actual motherboard testing procedure, but since all components attach to the motherboard in one way or another it could count as a prcess of elimination......\015\012\015\012 ... PC Desktops

Emachine t3958 Hi, I turned off my t3958 by pushing the power button and now it want come back on. I ohm the switch, not sure what it should be but it 0 out. I pulled out the mother board and inspected it, nothing looks or smells burnt. With the mother board out I plugged the power supply in to a outlet and one fan started running but only for a second then stopped. I then waited a few minutes plugged it back in and it did the same thing and if I unplug and then plug right back in again it does


First check to see if a drive died. Unplug all the drive Floppy, hard and dvd or burns. I have come across many time that a drive will die and keep motherboard from booting. Being that you say you get a green light on the motherboard shows that the ... E-Machines eMachines Desktop PC
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 2.0325 seconds