Having problems with your Gateway FPD2275W LCD Monitor ?

Monitor in default

\015 I just done a complete wipe of my hard drive.i then installed the full version of win.xp sp2.for some reason windows put my monitor into a default mode.i can't change my screen resolution or color bits.so i went and bought a nvidia fx5200 AGP 8x 128Mb card.this took care of the default problem.but the video card is causing me a lot of problems,like>freezing my PC.unable to use my cddvdrw-rom.can't use my win, media player,images popping up all the time,just to name a few.so i think i have a heat problem or a junk video card.i need to pull out the card and figure out how to get my monitor into a no default mode.can you help????\015

Answers :

I think the first problem was that you did not load the drivers for the on-board video. And the problems you are having now may also be due to not loading drivers - in this case the chipset drivers for the motherboard. If you go to the vendors web site for the machine or motherboard, they should have all the drivers you need to get your machine running properly. If you give us some info on the brand of machine or mobo, we can then tell you where to get them.
Repair Help & Product Troubleshooting for Gateway FPD2275W LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Viewsonic monitor not detected after service


Hello,If you are running DVI-D(the white connector) then it isn't getting a digital handshake. If you have inspected the connection between the 2 and make sure there is no bent pins inside the connector that it mates with. If you have another c ... ViewSonic Computer Monitors

Stuck in default monitor setting


Please reinstall the videocard+ the drivers.. ... Dell Computer Monitors

Stuck in default monitor setting


Hi,\015\012\015\012After installing XP you have to install all the device drivers. ... Dell Dimension 2350 PC Desktop

HP w1907 screen distortion


Angelsfire82,\015\012\015\012It does sound like there is something wrong internally if the monitor shows the vertical lines even if it's not connect to the pc. Unfortunately, they usually cost more to fix than to buy a new one. \0 ... HP w1907 LCD Monitor

Laptop to tv


If your tv don't have s video input,you can get an Svideo to RCA cord.\015\012If the tv does have s video input,just get an s video cable and plug it into the tv and computer s video ports and follow the steps below for setup.\015\012 ... Toshiba Satellite L305D-S5895 Notebook

Trying to use my hp laptop with sony lcd hdmi tv for movies


You should have an S video port on both tv and computer.\015\012\015\012If your tv don't have s video input,you can get an S video to RCA cord.If the tv does have s video input,just get an s video cable and plug it into the tv and c ... HP Pavilion dv6000z Notebook

Monitor power indicator blinks but doesn t show desktop.


Hello plz follow these instruction :\015\0121. firstly you put the working monitor to default pc and then turn it on and after window desktop is opened then.\015\0122. click right mouse buttion to desktop and choose properties.\015\ ... Proview Computer Monitors

How do I get my monitor back to the factory installed settings?


This varies alot between different monitors. But almost every monitor i have worked with has an option to do this. If you push the menu button on your monitor then look around for an option that says "restore defaults", "defaults", "factory", etc. se ... PC Desktops

Monitor displaying out of range message - Hansol Computer Monitors


Hello and Welcome to FixYa!This usually happens when you select a resolution or a refresh rate that is beyond the monitor range. For example if your monitor supports a max. resolution of 1024x768 then if you give it a signal of 1600x1200 ... Hansol Computer Monitors

I need a driver for gateway 17 in. wide screen monitor FPD1775W


You might want to consider a default settings reset. To refresh or reset the monitor back to default settings, unplug the\015\012monitor's power cord, and then press the the power button for five (5)\015\012seconds to drain any residual power. Plug i ... Gateway FPD1775W Monitor

Monitor in default


I think the first problem was that you did not load the drivers for the on-board video. And the problems you are having now may also be due to not loading drivers - in this case the chipset drivers for the motherboard. If you go to the vendors web ... Gateway FPD2275W LCD Monitor

Travelmate 4202wlmi displays incorrect setting on startup - 1280 x 768 (default Monitor on mobile Intel 945gm express chipset family) and I cannot change it to 1280 x 800 (Plug and Play Monitor on Mobile intel 954gm Express Chipset Player)which is the one I prefer. When it starts up on the default montior there is a black stripe on the right hand side and my screen is squished on the left hand side.


Some display settings are not compatible with some monitors/lcd displays...\015\012check before u make any changes to the display properties....\015\012some changes done forcebly will permanently damage ur monitor beyond repair....\ ... Acer TravelMate 4202WLMi Notebook

Monitor resolution not listed, Driver update issue


My compliments. Your description of your problem is great. I know what you've done and I understand your problem.\015\012\015\012However, I am wondering about a few things that may help you. the video settings that you are referring to ... AOC 917Sw 19" LCD Monitor

Hi, I got a serious problem with my PC. The PC was working as "normal", but the monitor display was not "perfect" :-). So I went to control panel->display->setting->advanced->monitor. I cannot remember what exactly I have done, maybe I disabled the only monitor, which is the "default monitor". Then the computer automatically re-started. When the window come-up, there is no display on the screen. I think the computer was started correctly, but just no display. By now every time when the computer


Mike,\015\012\015\012I'd have to know the manufacturer and model of your PC to know for certain if this is the case. But based on the information I have, heres what I think happened.\015\012\015\012Your 1st symptom sounds like ... PC Desktops

My Hp mx70 monitor Will rendor the color green as black


Dear Killkerson,\015\012\015\012As i understand from the situation, Please do the following:\015\012\015\0121. First confirm that the problem is with the monitor. You can do this by trying this monitor on any other CPU. If the ... HP Pavilion MX70 17" CRT Monitor

AMW 19" LCD Monitor


Go to NVDIA web site download the latest driver. \015\012you need at least 32bit color to setup the monitor.\015\012the 8-bit color is a default, that is why the monitor alway return to default size which is 800x600.\015\01219" moni ... Dell Dimension 4600 PC Desktop

Colors have gone wrong


There could be 3 reasons for this...1. If color settings are changed from the computer...try to reset to defaults2. if colors are changed from monitor..try to reset to factory defaults3. If ... Dell E176FP 17" LCD Monitor

Monitor screen display stretched center but squashed/narrow edges


On the monitor itself, I am guessing this is a desktop? There are buttons for adjustment. Look for the menu button around the bezel of the monitor and press it. Scroll through the settings for the default setting and press that. Once the default sett ... Computer Monitors

Hello sir, i purchased samsung 2043swxplus monitor 1month ago. I even installed the drivers of the monitor. But the monitor is not getting 1600*900 size as it is the default size. what to do?


Hi there, if this is a 20 inch screen the default size is 1600x1050. In all my years of working i honestly have never had to install drivers for a monitor but i guess there is no harm in doing so. Now in your problem above, it sounds like the configu ... Samsung 2043swx Monitor

Neon blue hurts my eyes


You might wanna reset your monitor's settings to default, just play with your monitor's options untill you find the reset to default option. If resetting the monitor's settings doesnt work, then try resetting your video card's settings. right click t ... Proview PL913S 19" Flat Panel LCD Monitor

AOC spectrum 7 Glr ?


Hi,Initially, I would suggest that you do a full reset, that is unplug the monitor from the mains and the PC for a couple of hours (preferably overnight). The idea is that the monitor will reset itself to default factory settings. Thereaf ... AOC LM729 17" LCD Monitor

Dell Inspiron 530 boots then the screens turn off to orange light


Is the PC actually doing to sleep or is the display just amber with the fan and power light on the PC still running?\015\012\015\012Do you have multiple video cards or multiple ports?\015\012You may have the monitor plugged into the ... Dell Inspiron 530s Desktop Computer (ddcwfa2_5) IntelPentium dual-core processor E2160 (1MB L2,1.80G

How do you get a computer out of preparing to run system set up? it stays stuck there


Before you start looking at reinstalling Windows you need to back up your important data – just in case anything goes horribly wrong. \015\012\015\012\015\012Reinstallation\015\012loadTOCNode(1, 'summary');\015\012\015\012\015\012\0 ... PC Desktops

Multiple monitor feature


Boot to SAFE mode, go to device manager, remove all Monitors, reboot and let it re-detect. That should resolve you resolution issue. ... Dell Latitude C510 Notebook

Acer AL1716 monitor


First of all check your monitor's color configurations using the buttons in the monitor. Then, if colors are set to default, go to your GPU's control panel, usually found by right clicking your desktop and finding an option that says ie. Nvidia contr ... Acer AL1716 F Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3161 seconds