Having problems with your Gateway FPD2275W LCD Monitor ?
The on off button on front doesn?t turn the unit off and on
\015 \015\012I have a Gateway monitor 2100.The on off button on front doesn\342\200\231t turn the unit off and on. I have to unplug the power cord. That worked for a while but now all I get is a bright power on blue light for a second or 2 and then the blue light dims, no picture nothing. \015\012\015\012I have taken it apart and found that:\015\012\015\012A: With NO ribbons plugged to screen panel and I plug in power, the off/on works ok. I get a bright blue light for about 10-15 seconds, like it's trying to boot up and then the light goes yellow like it's going into sleep mode. I can hear a faint buzzing noise from one of two little black boxes on the main curit board it is marked T302. (Could this be the problem)?\015\012\015\012B: With the main ribbon plugged into the panel and power applied. I get symptoms as described (NO BUZZING SOUND).can someone help me? I paid a lot of money for this thing.\015\012\015
Same here, your light went out if you put a VERY bright light on you'll be able to see something on the screen if you plug it up to your computer, if you are getting a new one go dell its worth it becase they last and are durable.
Repair Help & Product Troubleshooting for Gateway FPD2275W LCD Monitor
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Won't Power On!
My brother had the same problem with his machine. On doing some research online I came across this site:http://www.acerpanam.com/synapse/forms/portal20.cfm?website=AcerPanAm.com&siteid=7117&areaid=2&formid=3390#results ... Acer Aspire L100 PC Desktop
MPC ClientPro 1.6 GHz system unit won't power off
Usually, when you hold an ATX power button down for more than 3 seconds, it forces the system to power down. If this is not the case, there may be a hardware problem. This is a type of hardware problem that I have encountered when one of ... MPC Computers ClientPro 345D PC Desktop
Removing front bezel of Dell 1907FP monitor to repair stuck power button
ThndrChld's suggestions are great but way too complicated. all you need is a flat head screwdriver. the front bezel/frame/whateveryoucallit can be removed without taking the backside off at all.\015\012\015\012th ... Dell UltraSharp 1907FP 19" LCD Monitor
IBM Lenovo doesnt start. Fans are ok Ram and Graphics card attached with the system is ok( I checkd with another system). The led on front , the keyboard leds and cd driv leds turns on as soon as I press the power button. but goes off after 2 or 3 seconds. the power button remains on. Please help me
Sounds like your graphics card and display are not properly communicating. If the card doesn't sent out a signal to the display, you will see nothing on the screen. Did you check the graphics card on another machine using the same display? If so ... IBM Lenovo ThinkCentre M55e PC Desktop
DVD GMA-4028N will not eject cd - PC Desktops
First off all unplug the dvd unit from main power outlet for a minute.then plug it and before turning it on manuall on the front pannel of the unit press the eject buttonm continuously before turning it on.keep pressing the eject button and turn the ... PC Desktops
Dell Dimension 2400 won't turn on
Replace the fuse ... Dell Dimension 2400 PC Desktop
The on off button on front doesn?t turn the unit off and on
Same here, your light went out if you put a VERY bright light on you'll be able to see something on the screen if you plug it up to your computer, if you are getting a new one go dell its worth it becase they last and are durable. ... Gateway FPD2275W LCD Monitor
Broken power button
Just take the PCB out of the unit, if its a mechanical switch just hit it and leave it on and reassemble, if its a push button switch just drill a hole next to the switch and use a non metalic object to turn the unit on :-) ... Sony CPD G500 21" CRT Monitor
Hp pavilion dv6633 won't start. Light up, then
Sorry to here about your DV6633 start up problems.\015\0121st. It would be good to know any other problems you may have had in the past either related or non related to you current problems..\015\012I take it you ... HP Pavilion dv6000z Notebook
Wireless controller position
Try this:Under heading "How can I change the screen positions for my wireless controllers?"http://www.xbox.com/en-US/support/systemuse/xbox360/resources/supportfaq.htmTo reset the screen configuration for an ... Microsoft Xbox 360 Controller
Dimension 8400 will not boot, very loud fan.
Pc turns on and fan is very load and will not boot what can i do ... Dell Dimension 8400 PC Desktop
Emachines problem... PSU works but comp doesnt turn on
Hi,\015\012I don't want to tell you a color because it could be different than the actual. Look at the front of the computer and trace the wire that goes to the switch and follow it to the mother board. If you have a volt meter you could measure the ... E-Machines eMachines Desktop PC
Power button on front off cpu won't turn pc on
I'm afraid it's not. A PC power supply is always in "standby", and the "power" button just activates the power supply so to speak. So if it doesn't start, it means that there's a problem with the power supply unit, the motherboard or the connec ... PC Desktops
Front panel leads Emachine model T2862
E-machine model T2862 pin-out for the 10-pin front panel header is screen-printed on my Emachine's motherboard, but is so small and far away from the actual pin location, that it is likely being overlooked. If looking into the computer case from the ... PC Desktops
When I power on my Acer Aspiron T650, the power button turns orange and the CD light blinks on one every few seconds, but it does not boot. If I jostle the computer (e.g. lift the front half an inch and drop it) the power button turns green and it boots properly. I have already replaced the Power Supply.
As per the problem which you mentioned it clears that the product does not have any problem and its in working condition.\015\012but what you are facing is a loose connection problem.\015\012i will explain you the option try them one by o ... PC Desktops
Powers On if I plug it in, and power supply fan runs...
Think of blinking amber as the initial state of the LED. As long as the system is receiving power from a power source and can pass that power through the system board to the LED on the Control Panel it should, at least, blink amber. \015\012As a resu ... Dell PowerEdge 1800 Server
Faulty Monitor? I bought one of these Xerox flat panel 19 inch monitors to replace my convention Sony unit about 4-5 months ago. It has worked just fine until about 7 days ago. Are there any known problems with these Xerox units? I turn my computer off during the day, when I am at work. I also turn my computer off during the night when I am asleep. At those night times I also turn the 'blue power button' on the monitor off as well, as it will flash annoyingly in the room if left in the 'stand
I have also fixed my wife's Xerox monitor Thanks to all the posts on this website !!! I just fixed it yesterday. It was fairly easy.\015\012\015\012 I layed my on a clean towel. Like they said remove ... Xerox XG-91D 19" LCD Monitor
My monitor shows a blank screen .But when I press the RGB, DVI button, I can see my desktop for a second then it stops displaying. I have to keep pressing the button to change the display type in order to see any screen, but it only lasts for a second between button pressing.
Moneyshaker, Maybe your screen (LCD panel) is not blank, just BLACK!!! First thing to do is the flashlight test! With monitor connected to a KNOWN GOOD fully booted pc with WIN-desktop showing, reconnect N9 lcd to pc. Then and only then turn on N9 lc ... Scanport N9 19" LCD Monitor
Won't turn on - dead dead dead
Hi,\015\012\015\012This sounds like the power supply circuitry inside the notebook.\015\012\015\0121. AC Adaptor - OK but if connected to the mains and plug to the laptop, there should be an indicator in the laptop that it is so, per your post none;\ ... Toshiba Satellite M45-S169 Notebook
My VA712 does not turn on, when supply button (mains) not from front panel, switch ON it shows blank screen (no sign of turn on) but when repeatedly switch ON & Off it Turns On & shows the display. What is possible fault?
Bholesir, If unit covered by ViewSonic warranty, USE IT!!! The units "switch-mode-power-supply" is in need of service!! Unit WILL require inspection and repair of possible bad (poor quality soldering) soldering of electronic components to the prinded ... ViewSonic VA712 17" LCD Monitor
System does not power on and the LEDs on the front of the computer are not flashing.System unable to power on.Press and hold the power button for less than 4 seconds. If the hard drive LED turns green, then:1.Check that the voltage ... HP Compaq Business d530 PC Desktop
HP DV2503TX LCD won't turn on
Doesnt seem to be the screen by the sound of things...first of all splitting into 8 screens is not motherboard problem neither is blue screen..\015\012if you have bad sectors on hd screen wont come on...\015\012if have faulty mem cards wo ... HP Pavilion dv2000t Notebook
No picture or power green light just blinks - Sceptre X9G Komodo II (Black) 19 in. Flat Panel LCD Monitor
Carrizosas, Tell me more. How old? Approx. total "ON" hours of use? Did it display a "bright, crisp, full color text and graphics and pictures the day before? Does this unit have a lay on floor "BLACK BRICK" ac to dc supply, or only a 3 wire line cor ... Sceptre X9G Komodo II (Black) 19 in. Flat Panel LCD Monitor
Altec Lansing PT7031 - ''Panel Key is Locked''
With the unit turned on... \015\012\015\012Press the following front panel buttons in sequence within a 10 second span: \015\012[Vol+] / [Vol-] / [Vol+] / [Vol-] / [Vol+] / [Vol-]\015\012\015\012Successful unlock ... Altec Lansing PT7031 Computer Speakers
My Dell Dimension 3100 will not boot up after I had opened the side cover to clean the interior of dirt using a brush and a vacuum cleaner. The only light I get now is an amber light on the ON/OFF button which would normally turn green on successful boot up.
The first thing that i would do, would be to unplug the power cable and network cable from the back of your computer.\012let it sit for about 15 minutes.plug power and network back in. Amber usually indicates a power fault cond ... Dell Dimension 3100 PC Desktop