Having problems with your Gateway FPD2275W LCD Monitor ?

What is the solution for monitor flickering?i have tried wit 75hz refresh rate,but it didn't work


Answers :

There is a possibility that the backlight has a problem,it would make the screen flicker no matter what settings you choose.try it on another computer without changing settings
Repair Help & Product Troubleshooting for Gateway FPD2275W LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

IBM 21" frequent tick sound!


Too much refresh rate! set it to 60 hz only! you're over-stressing major components on your monitor! ... IBM P 202 21" CRT Monitor

Blurry (bleeding?) display


Try plugging the monitor into a system that is known to be good. If the problem stays the problem is most likely some thing with the monitor (unless it?s the cable, try a new cable also). If the problem goes away the real problem is in your video c ... ViewSonic VG175 17.4" LCD Monitor

Monitor wont stay on- blue light is on. but screen keeps going blank.


Have you tried the monitor on another computer? If so, and it works, the issue is with your graphics settings on your computer. LCD and plasma based monitors often come with a protection circuit that disables the monitor if the synch or refresh rate ... Acer X193W LCD Monitor

ViewSonic VX922 monitor - black screen - green power light flashes


PLEASE read Carefully so here is a fix for the green blinking light ...the monitor is going into shutdown....protect mode......THIS is ...Only for the seasoned electronic service tech ......YOU NEED TO BE into Electronics ..or have electronic backgro ... ViewSonic VX922 19" Monitor Flat Panel

LG screen goes in stand by. I was using two monitors for several months, everything OK, now I decided to get a new LG Flatron instead of one of the monitors... and only this one goes in safe mode!! Two screens plugged in: Philips analogical working fine no problems. New LG Flatron digital goes in power save mode after few minutes Tried to plug in ONLY the LG, same problem after few minutes. Philips monitor no problems. So it HAS to be a screen function or problem of the LG? Computer: AMD + 3Ghz


Oke having a similar problem atm, this is what i have found so far. was trying to help a friend who has bought the same 19" LG monitor. When i connected the monitor to her PC i noticed that it was not the same connection as the previous one but it ha ... LG 19" Widescreen Flat Panel LCD Monitor

Lg CRT monitor model 500g 17inch -out of frequency


First, you did a great job of explaining and starting to identify the problem. You also eliminated a few things that we would have tried along the way.\015\012PROBLEM DEFINITION: The real issue (as you may already know) appears that the operat ... Computer Monitors

940mw - Compatibility


First thing i would check is your settings. See if windows is reconizing two monitors. If not then you will need to tell it to find it. Hook up your second monitor goto add new hardware and see if windows finds it. If it doesnt find it then i would g ... Samsung SyncMaster 940MW 19" LCD Monitor

Viewsonic VA712b 17 " flat screen monitor


Realheadache, \015\012\015\012Unusual problem, it could be the resolution and refresh rate setting your PCs video card is currently set at. I don?t know if this will fix your problem but its worth a try:\015\012\015\012- Now go to your PC with the ol ... ViewSonic VA712B 17" Flat Panel LCD Monitor

My 14" Likom monitor goes blank after installing WIndows XP


I assume your Samsung Magic CGB5607L is CRT monitor (Not LCD). It could be the problem with "Refresh Rate" the monitor can't handle. Set the lowest resolution with lowest refresh rate. (800x600 @ 60 Hertz). in Display Properties ... Fuji FP-988D 19" Flat Panel LCD Monitor

Problem with my LG monitor L194WT


You will have to increase the referesh rate first and then go into the game and reset the resolution. The resolution bit is secondary. If increasing the refresh rate works, then you dont have to change the resolution :) ... Computer Monitors

Cant do anything, I turn it on, get windows screen, next says windows restarting


With the hard drive removed power up the system and enter the CMOS setup utility. Make sure that it is working properly. If not then get an external monitor and plug it into the VGA port on your laptop. (should be D-shaped with 15 holes for pins). In ... Toshiba Satellite 5105-S701 (PS511U-02WYJX) PC Notebook

Cannot get monitor out of sleep mode


About 90% of the time this is a cable problem. Check the connection on both ends. Make sure the cable is firmly seated. If it is, pull out the cable and check the ends to make sure that none of the pins are bent. If so, straighten the pin back out an ... HP PC Desktops

Hyundai n71s monitor


This monitor is sensing information from your computer regarding the configuration. The computer is trying to do the same thing. First, boot the computer in safe mode. This will set the output of the computer to VGA specs. The monitor should work ... Hyundai Electronics ImageQuest N71S 17" LCD Monitor

Computer will not fully boot


It is almost certainly a memory error. First off remove the power cord and the small battery on the motherboard. You may see a jumper near the battery with something like 'rst cmos' next to it. If so pull it off and short it over the other pin. Wait ... HP Pavilion dv8000z Notebook

My computer begins to load windows, then after the screen with the windows logo and bars goes away my screen goes black.


Nine times out of ten if that's when your display stops, it's simply because your display settings are set to something that your monitor can't handle. Depending on what it's not supporting, some monitors respond by going black ... others just ... Dell Latitude D800 Notebook

PC Problem, p4 processor, intel D850GB . I think its the cpu


Yes you do buy a new processor but here a tip to work it properly because its old enough your motherboard, when you buy a new processor, bring your CPU to the Computer Center, the company you buy a new processor, let them put it in your CPU. If ... Computer Processors

Grey Squares on the monitor


Try reducing the resolution, Since the CRT you are referring to is old monitor, it might not support high resolution. ... TTX Medallion Series -8570 (White) 15 in.CRT Conventional Monitor

Heat from monitor - Computer Monitors


The monitor,screen,adapter or display of a\015\012computer is the primary user interface. Monitor problems are some of the\015\012most common computer problems since the voltages inside a monitor can be as\015\012high as 10 KV. Many of the problems ... Computer Monitors

I can press F8 and press reboot and the screen goes blank. How do I resolve the problem


First things first ... let's get you a bootable system.\015\012Boot in safe mode - press F8 when the Windows loader presents you with the\015\01230 second list of choices, and then select "Safe Mode" as your boot option.\015\012Righ ... Everex StepNote NC1500 Notebook

My monitor will not turn on


Hi you didnt say whether you tried changing the plug fuse,try that,if it still doesnt work then the power cut you had might have been a power spike in which case the monitor would be destroyed.Try testing the fuse in the plug first ..ok. ... Compaq Presario SR1103WM-B (PC183B#ABA) PC Desktop

Laptop monitor will not come on.


The next time you get it to come on, try the refresh rate. Have you tried to flash the BIOS? You can download the BIOS from the same place that you got the drivers. What brand of laptop is this? Cyberpower,DEL,HP,COMPAQ,ALIENWARE,GATEWA ... PC Laptops

Can you help me my computer says input signal out of range


This has to do with the refresh rate (hertz) of the monitor and whether the graphics card is capable of operating at that rate. So your graphics card is operating at a rate that is too high or too low for you monitor to receive. I've run into this wh ... PC Desktops

Monitor shaking problem but dont think its the monitor!


If both monitors are shaking,problem is with video card or motherboard,you might try loading specific drivers for your video card or try changib=ng refresh rates.\015\012Please rate the solution and provide feedback.\015\012Samir ... BenQ FP71E 17" LCD Monitor

Completley blank screen on boot up


You didnt mention the brand of the screen. this may be a input issiue if it has DVI and Svga and so on. check the menu to see if the monitor can be shifted to the other source. take the cable off and make sure no pins are loose or bent. then put cabl ... NEC PowerMate ES SlimLine PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.2387 seconds