Having problems with your Gateway 200 ARC Notebook ?

Gateway 200ARC goes to "Last Known Good Configuration" screen

\015 I have installed a new motherboard, hard drive, and DVD player in this laptop. When I start up computer it proceeds to the screen where you can choose to go into safe mode. When I choose any of the choices the screen just freezes and won't let me go any further. I have tried entering the BIOS setup to make sure it was set to boot to the DVD so I can reload the O/S to the computer but it never boots to the DVD, just goes to that screen.Help! I am working on this computer for an Iraq war vet and she really needs to know if I can fix this or not.\015

Answers :

Try reseating the dvd drive and then go into the BIOS to be sure that the drive is being recognized. Actually go into the area of the BIOS that shows the name of the dvd drive that it recognizes.

It it does recognize the dvd drive properly then try other boot cd's. It still may not recognize them.

If so try another known good dvd drive in the laptop and if you have the same problem then take out the hard drive and then see if the system will boot up off of the dvd drive then. If it still doesn't boot then the motherboard is bad.

If it does boot then that means the new hard drive is bad and shorting out the dvd drive controller on the motherboard and the hard drive would need to be replaced.

Hope this helps clear up things for you and sorry for not responding sooner.


Repair Help & Product Troubleshooting for Gateway 200 ARC Notebook

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Gateway 200ARC goes to "Last Known Good Configuration" screen

Try reseating the dvd drive and then go into the BIOS to be sure that the drive is being recognized. Actually go into the area of the BIOS that shows the name of the dvd drive that it recognizes.It it does recognize the dvd drive properl ... Gateway 200 ARC Notebook

Unit wont start, gray screen then goes to a screen with options on how to start unit and then goes blank

Answer:To load the last known good configuration in Windows\015\0122000 / XP reboot the computer and as it's booting booting press and\015\012hold your "F8 Key" which should bring up the "Windows Advanced Options\015\012Menu" as shown below. Use your ... NEC Versa VX Notebook

The desktop will not boot up. It's got power and sounds okay but

If you are able to get windows up you can restore it in a earlier time when it was working perfectly, this is if you have the 'restore point' on your pc. Other option if to use 'Last know good configuration'The Last Known Good Configurati ... Acer Aspire T160 (AST160UA3400) PC Desktop

Gateway 420GR will not boot up

Try hit F8 before gateway screen start last known. \015\012Start the computer using the last known good configuration\015\012\015\012\015\012\015\012\015\012When you see the message Please select the operating system to start ... Dell Dimension 8200 PC Desktop

Gateway 7330GZ Not Booting Properly

Unfortunately, I've seen this caused by both hardware problems (something on the system board) as well as software corruption in Windows.Try pressing the F8 key when you see the Gateway logo screen (press it three or four times). This sho ... Gateway 7330GZ Notebook

Gateway laptop screen is black?

This could have several causes, including malware installed on your system, but is frequently the result of some kind of hardware driver conflict. Have you recently installed any new hardware or software to your system? If so, disconnect it and try ... Gateway 7330GZ Notebook

Computer restarts on own and thats all it does.

I have a similar situation, only worse. \015\012\015\012Same brand, Toshiba M1. I also get the loop at the begining but this is during the install process (windows vista). It goes half way and needed to reboot (that is correct). But when ... Toshiba Tecra M1 PC Laptops

Last night I was using my computer. While I slept it ran a windows update. This morning I woke up the mouse didn't work, so I forced the computer to restart. Since then, it has continued to restart. It goes through the normal loading screens and then it goes to a screen giving me options to restart it: safe mode, safe mode with networking, last known good configuration, etc If I click safe mode, it loads a bunch of codes for about 20 seconds then restarts. If I select the last known good

I am going to assume that this is NOT a laptop.\015\012\015\012Plug everything back in... that makes no difference.\015\012The SAFE mode without networking is the most restricted software load. You want to "Restore to an earlier ti ... Gateway GT5220 PC Desktop

After booting process done. Screen goes blank and Keyboard not working only Mouse cursor is dispaly and working on the blank screen in My acer Laptop.

Try booting the system to Safe mode. To boot to safe mode:Restart\015\012the computer. As soon as the BIOS has finished loading, F8 key on your\015\012keyboard. When Windows Options menu appears, scroll to select the Safe\015 ... Acer Aspire 5610 Notebook

My emachine is stuck cycling at start up

No computer is trash when you are dealing with a software issue.\015\012\015\012boot up and tap on the f8 key... when you get to that screen... choose safe mode... if it successfully boots.... go to start menu... and restart again... it s ... E-Machines T2742 PC Desktop

Can't boot up laptop

If your Usb port works, then the mobo is working, so possible graphics problem.\015\012\015\012Try booting up in safe mode(normally pressing F8) on boot up then highlight 'start windows in safe mode', to see if Windows will load with only minimal dri ... Compaq Presario 2140US Notebook

Gateway desktop xp starts then flashes blue screen for split seco

Sometimes they make the recovery disk with windows on it, but not the programs that start windows during the boot up phase. One of the three main files that boots into windows is corrputed or your Master Boot Record is missing. There are two options ... Gateway PC Desktops

Unable to boot - A different problem...

Hello,I had this same problem with my R3000. If you select one of the options that will show you line by line what it is doing during startup, you will see that the last line shown is called (in my case) mup.sys. You will get a long path like c ... Compaq Presario R3000 Notebook

My hp media desk top computer vista will not boot up i get blue screen with some comands and logo hp invent then screen goes to black screen and has this message, reboot and select proper boot device or insert media in selected boot device and press a key

First you should do is start the computer and go into the BIOS and restart to factory settings to do this you will either press F2 , F12 , or DELETE repeatedly as soon as the computer boots up. Then when in the BIOS Menu there will be a option to set ... HP Pavilion a1700n PC Desktop

My computer wont open windows

Step 1: Removing recently added hardware\015\012Use the steps in this section to disconnect any recently added hardware and test for the error. \015\012NOTE: If a new internal device (sound card, hard drive, or other) was ad ... Compaq Presario 5000 PC Desktop

ADVENT KC550P Lap Top scren

The pc is standing at command prompt, which means it is unable to find the boot.ini file required to boot into windows\015\012\015\012When you say you pressed F8 did you keep pressing it until you got a menu saying Safe Mode,last known go ... PC Desktops

Computer Will Not Boot

You will need to do either an in-place upgrade of your Widows OS Or Use a System Restore Disk.Let us know what happened prior to these issues so we can give you a better estimate of the necessary steps to get you o ... PC Desktops

Laptop start up error

When the computer starts up press F8 repeatedly to enter the windows startup options. Try using Last Known Good Configuration and see if it goes in. If not, try safe mode - if it goes in with safe mode perform a diskcheck and do a system restore to w ... Acer Aspire 4315-2963 Notebook

HELP!! (dell precision 340) im getting 4 screens when i turn on m

Reboot into Safe Mode by repeatingly tapping on F8 while in process of rebooting and then select "last known good configuration". If that fails reboot again to safe mode and select safe mode with command prompt and in the command prompt type "chkdsk ... Dell Precision 360n PC Desktop

Configuring updates dont stop

I'll assume last known good configuration didn't work, if you press f8 and choose disable automatic restart on failure, you should see the blue screen of death with more info, when you reboot the next time,(you may have to hold in power button for 5 ... Acer Aspire 5315 Notebook

HP Compaq FS7600 - won't boot -

It sounds like the update screwed up Windows. Have you tried all the "last known good configuration" option? That sometimes gets the system going. If safe mode and the other choices all are failing, you can try the recovery console if you ... HP Compaq FS7600 17" CRT Monitor

Shutting down incorrectly

Hit F8 while booting up then start the computer using the last known good configuration. If this helps please rate me if not let me know so I can help. mysleuth I copied this from WinXP Help and Support you should be able t ... HP Compaq Presario SR1830NX PC Desktop

Computer has frozen on windows logo

1) Which version of Windows ? For the following discussion I am assuming it is 2000, XP or higher. You may also want to print this, it's long.2) Is this this the low resolution Windows logo on the black scre ... Fujitsu Siemens SCALEO 600 (FSP:83C005617) PC Desktop

The screen goes very dark within a minute after booting up = I can just barely see the menu page

When you say screen goes very dark when it booted to windows so it means that when you turned on the laptop when the dell logo flashes the screen was fine? if thats the case could you please try this. after turning on the laptop you will see the dell ... Dell Inspiron 2200 Notebook

It won't boot up. Sometimes goes to blank screen and sometimes goes to screen prompting whether to start in safe mode, normal windows startup, or to start in last known good configuration. Either way, it then goes to blank screen only from there.

Hi.If you get the screen asking you the start mode, that means that the problem is the operative system.In this case the only way to fix the problem is by reinstalling Windows or doing a System recovery.You will ne ... HP Pavilion dv5215 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9633 seconds