Having problems with your Envision EN-7100e 17" Flat Panel LCD Monitor ?

My Envision 9410 Monitor flashes on and off. You see the picture fine, but then it goes to a black screen and then back to seeing desktop. The power light goes on and off while this is happening. Is this the inverter?


Answers :

Its either going to be the inverter or the lcd going back and it can't keep the screen lit.

Also I've seen it where the capacitors on the power board go puffy and they need to be replaced.

It will be one of those three things.


Repair Help & Product Troubleshooting for Envision EN-7100e 17" Flat Panel LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor stays on for a few seconds then goes out


This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

ACER AL1914 LCD Monitor goes black but green light stays on


The monitor is doing a self test a finding an error.\015\012The lcd has three parts, the screen plate(windows)/the logic(vga)/the\015\012inverter(power plug). Parts that go are the backlight ccfl's, behind\015\012the plate, and parts of the inv ... Acer AL1914 19" LCD Monitor

ViewSonic VX922 monitor - black screen - green power light flashes


PLEASE read Carefully so here is a fix for the green blinking light ...the monitor is going into shutdown....protect mode......THIS is ...Only for the seasoned electronic service tech ......YOU NEED TO BE into Electronics ..or have electronic backgro ... ViewSonic VX922 19" Monitor Flat Panel

Philips 190S monitor - Urgent!


The lcd has three parts the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, all three take a bit of power from the inverter. The self t ... Philips 190P6EB 19" LCD Monitor

My monitor shuts off(goes blank for a few seconds


The monitor is doing a self test a finding an error.The lcd has three parts, the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, ... LG L1915S 19" LCD Monitor

Screen goes blank


Hi jkm007,\015\012\015\012Sounds like the back light inverter board is bad.\015\012\015\012It's a very common problem.\015\012\015\012LCD's use four small cold compact fluorescent bulbs to back light the display. (thats what gives the LCD it's bright ... Videoseven V7 L19PS 19" LCD Monitor

When it powers up the screen is fine then it goes black with no signal box, then if you turn it off and on again screens comes back for few seconds and then off again, sying no signal. Viewsonic LCD monitor VP720b


The lcd has three parts the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, all three take a bit of power from the inverter. The self t ... ViewSonic VA720 17" LCD Flat Panel Monitor

W1907 Monitor Goes Blank


If you still have this monitor type, you are obviously no longer under warranty and need some help, not "smart alek" or "return" it advise.The issue is with the power board that feeds the inverters which in turn power the CCFL bulbs. This mon ... HP Compaq WF1907 Monitor

Black screen on acer 242lc lights come on power up


You indicate that the lamp for Power On comes on? (Light bulb icon) What about the harddrive activity lamp? (Media Activity icon. Looks like a book. Third icon going right, from Light bulb icon) Is this lamp lit up? (May flash ... Acer TravelMate 242LC Notebook

Monitor goes blank automatically after about 40 minutes...


Hi Randygui,\015\012\015\012Sounds like the back light inverter board is bad.\015\012\015\012It's a very common problem.\015\012\015\012LCD's use four small cold compact fluorescent bulbs to back light the display. (thats what gives the LCD it's brig ... BenQ FP71G 17" LCD Monitor

Monitor goes blank less than a second after turning on.


If you put bright light at an angle close to lcd can you see a windows shadow, text icons etc, ie still logic power passing,then .... (from a.n. other) after two weeks searching I finally find doctor living stone http://www.aplusperfect.com/articles/ ... Dell E176FP 17" LCD Monitor

Laptop not powering - HP6710b 2.1GHz 15.4 160GB 5400 PC Notebook


Sir,TAKE OUT BATTERY, REMOVE MAINS SUPPLY, HOLD POWER BUTTON DOWN FOR 30SECS PUT POWER SUPPLY IN ONLY DO NOT PUT IN BATTERY TURN ON LAPTOP NOWPUT IN BATTERY\015\012AC power adapter\015\012How the AC adapter worksThe most commo ... HP6710b 2.1GHz 15.4 160GB 5400 PC Notebook

Gateway monitor FPD1975W-UK screen fuzzy lines for a few seconds blue on & off light flashes on and off then screen goes blank also a small current coming through the pc connector cable.


The lcd has three parts the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, all three take a bit of power from the inverter. The self t ... Gateway FPD1975W 19" LCD Monitor

I have a proview PA-19DKS MONITOR. It hasn't been hooked into a computer yet. But it has been hooked up to cable so my daughter can watch cartoons.Recently, when it is turned on it shows the blue screen for a few seconds and then goes completely black. What could be the cause?


The lcd has three parts, the screen plate(windows)/the logic(vga)/the\015\012inverter(power plug). Parts that go are the backlight ccfl's, behind\015\012the plate, and parts of the inverter, ie capacitors, all three take a\015\012bit of power from th ... Proview PL913S 19" Flat Panel LCD Monitor

Monitor goes blank


Sounds like the back light inverter board is bad. \015\012\015\012It's a very common problem.\015\012\015\012LCD's use four small cold compact fluorescent bulbs to back light the display. (thats what gives the LCD it's brightness allowing you to see ... Dell E153FPc 15" TFT LCD Flat Panel Monitor

Laptop's light is turning off!


This is going to be a problem with either the screen inverter, or the screen backlight. I would recommend have it diagnosed first to see which it is. You can test this yourself if you have an ohm meter, and a little technical know how.Yo ... IBM ThinkPad R40 2897 Notebook

Monitor goes black but the green light stays on. I turn the power button off and then back on and it comes back on. It may stay on for a few seconds to several minutes.


Check to see if the image is Dimmed. Chances are the power supply on the FPD is either dead or not supplying power to the back lights.\015\012Your problem is the back lights are not being powered. There is a signal going to your FPD becau ... PC Desktops

The monitor goes blank after just a few seconds or sometimes works for hours.


Two possible causes are bad capacitors or a bad light inside the LCD panel.\015\012\015\012Open the unit and check to see if any of the capacitors in the power supplyor other boards look domed or vented on the top.\015\012\015 ... ViewSonic VX924 19" LCD Monitor

Dell LCD E207WFP (Switches on Briefly then goes Off)


Two case trouble reason and need to do:\015\0121) back light driver (inverter) works not stable and DC power protect. it near some component damage, should repair inverter by egineer.\015\0122) back light (lamp) over life cycle so protect ... Dell E207WFP LCD Monitor

Problem with monitor


Hi.\015\012\015\012Are you able to see a slight image on it at dusk and maybe with the\015\012help of a flashlight. since your blue light stays on the video board,\015\012may be okay.\015\012\015\012It sounds like you have bad capacitors ... ViewSonic VX2235wm LCD Monitor

My montior turns on for a few seconds then the screen goes black. if i hit the pwr button it just repeats the process


If you put bright light at an angle close to lcd can you see a windows\015\012shadow, text icons etc, ie still logic power passing,then .... (from\015\012a.n. other) after two weeks searching I finally find doctor living\015\012stone http://www.aplus ... Westinghouse Electric L1916HW 19" Monitor

Screen goes black


It's an LCD so the problem is most likely the back-light inverter board. Take a flashlight and shine it directly into the screen from the front. Can you see the image on the screen now? If the image is there but you can't see it without the flashligh ... Rosewill R900J 19" Flat Panel LCD Monitor

Screen Keeps turning off after about 1 second. I turn it on and can see the desktop for about a second then the screen shuts itself off. turn it on and it keeps going off.like everysecond or two..tried different connections same thing


Willie114, You have typical problem of lcd monitor failure. There is only one further test you can do. Reconnect H170L to an already fully booted pc with WIN-Desktop showing. then and only then turn on H170L. As soon as screen goes to BLACK, shine br ... Envision H170L Monitor

Monitor comes on, then goes back off, rinse, repeat.


Well here is a test you can do. When the monitor goes black, take a flash light and hold at it a angle towards the monitor, if you can still faintly see the image then you have a blacklight/inverter issue. Another common issue with this is the capaci ... Princeton Digital VL1918 Monitor

LCD Monitor. I get a power light that goes to green then a quick very light flash of light on the screen, then the screen goes completely dark. I can not see the image with a flashlight as other posters have mentioned. Steady green light stays on. I've pulled the back of the machine and all of the caps look okay. They don't look blown at all, however the metal cover that covers the components is all black in spots, like something burned or significantly overheated. I am willing to replace co


Hi\015\012\015\012\015\012Thanks for using FixYa. If the capacitors look fine then check for the power out put from the power board to other boards and to the back light inverter. I'll also suggest you to check whether the to ... Westinghouse L2046NV Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0963 seconds