Having problems with your Envision EN9410 19" Flat Panel LCD Monitor ?

The power is on, but I can barely see anything--the monitor is black but I can barely see the menu screen.


Answers :

Hello,

The problem you have is caused by one of two things,\015\012either a blown power supply in the backlight inverter or bad backlight\015\012bulbs. More than likely it is the bad power supply. The problem in the\015\012power supply are parts called capacitors, they blow out because of the\015\012heat trapped inside the monitor enclosure. If you can solder you should\015\012be able to repair this type of problem. You can go to our web site at: www.ccl-la.com/badcaps.htm\015\012we have pictures of what the capacitors look like when they blow out.\015\012Take the case off the back of your monitor and look for any that look\015\012like the pictures. Replace all of the ones that are bad, the values of\015\012the caps are printed on the side of each one. You can order replacement\015\012caps from several places on the internet or contact us and we can\015\012supply them for you. When installing the replacement caps be sure to\015\012insert the new ones with the stripe on the side going the same way. If\015\012you don't want to do the repairs yourself we offer a repair service. If\015\012you have any additional questions just email me.

I hope this helps, if so please rate my solution.

Buddy
Corporate Computer
www.ccl-la.com
Repair Help & Product Troubleshooting for Envision EN9410 19" Flat Panel LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dell E171FP Monitor goes black after 2 secs


Hi, I don't think the problem is with your monitor. Your monitor sounds like it's doing exactly what it's supposed to do. The monitor is supposed to turn off if there's no cable attached, which means there's no signal input. When the screen goes b ... Dell E171FP 17" Flat Panel LCD Monitor

Picture goes black on Mag Innovision LT765b


I used to repair LCD monitor from Dell. It works for me. You might be using\015\012these following steps to examine what wrong with your monitor. After you turned PC on and\015\012monitor stopped working or went black, you have to check that if ... Mag Innovision LT765b 17" Flat Panel LCD Monitor

Viewsonic VP2130B no Video


First off, on these monitors, usually the power board is also the inverter board. If its not on this model monitor, and you know that by opening it up and seeing the backlight cables connected to a different board, than that may be the problem, but i ... Computer Monitors

Syncmaster 930bf black screen


Hello,its a common problem for LCD monitors after 2-3 years of use. The power supply that powers the back lights has gone out. If you can solder you should be able to do the repair yourself. The problem is caused by parts called capacitor ... Samsung SyncMaster 930BF 19" LCD Monitor

Power light flashes yellow then green


I used to repair LCD monitor from\015\012Dell. It works. Most of LCD monitor brand have the save main components such as CCFL lamps, inverter board, power board. You might be using these following steps to examine what\015\012wrong with your mo ... Balance CM2015 15" LCD Monitor

Extremely Dim/Dark ViewSonic Monitor


There are two places to look for the problems, the backlight inverter board and the power supply. Look at the power supply first since it is easier to get to, look for burnt parts, bad capacitors, etc.\015\012 ... ViewSonic VX2235wm LCD Monitor

Screen Not Staying On


Hi TontBrowne,\015\012\015\012I'm not sure exactly what causes this problem. However it seems that lowering the 'Brightness' and 'Contrast' fixes things. The problem is, you can't see the menu without the backlight. However, try this, as ... Dell Dimension 4600 PC Desktop

Syncmaster paower button blinking and no display


First of all plug another monitor to the VC on your PC and do the same for the SamSung"I over heat"SyncMaster2 053BW. \015\012 \015\012\015\0 ... Samsung SyncMaster 204B 20.1" LCD Monitor

ACER AL1716 LCD MONITOR


I used to repair LCD monitor from\015\012Dell. It works for me. You might be using these following steps to examine what\015\012wrong with your monitor. After you turned PC on and monitor stopped working or\015\012went black, you have to check ... Acer AL1716Bbd 17" LCD Monitor

Monitor Hi, My computer seems to be booting properly however when windows launches my monitor goes dark. Not black... It is like there is a screen over my screen?? I can see (just barely) my icons and can shut the computer back down. I cant see enough to use it or do anything on it. I get this sometimes when using the restart computer function but can usually get it to shut down and start working properly after. However, this time it is not the case. It looks like there is still something runnin


Sounds like you may have a bug, you could try re-ionstalling everything fresh, it may need a driver update. Check the funtcion keys. Sometimes you can turn up the screen contrast by holding the function key and hiiting the function key that looks li ... Dell Latitude C640 Notebook

Monitor black screen


I experienced a similar problem with my MAG LT776s. As a "band-aid" fix, I have found that if I turn the monitor brightness to near zero my problem is minimized. Meaning - the monitor goes on after a little wait (~ 20 sec) and will stay on. ... Mag Innovision LT776s 17" LCD Monitor

Green light comes on for a few seconds then turns orange


Hello,If you have a popped cap then the mosfets are blown. They blow as soon as the cap shorts and pops. You need to replace both mosfets and the 220uf caps and test the fuse with a multimeter I would bet its blown too.Buddy ... Acer AL1916W 19" LCD Monitor

Hi, I'm having an issue with a Samsung monitor. On


Oct 23, 2009- This is how it went for me..I have a Samsung SYNCMASTER ... Samsung SyncMaster 920NW Monitor

Ok..So I've had my tx2500 for a little over a year now (go figure, the warranty's out). After I booted up today, I went online and after a few minutes, the screen went pixel'y' and then went blank. The lights on the monitor were still blue and the computer was still running. I unplugged the power cord and the computer shut down then restarted. The screen was working, but after I logged in to windows, the screen was just black with the mouse pointer visable. I pressed the start menu button, then


There is something wrong with the video driver or the monitor...If the screen shows something like the devices when it boots up...and only goes blak when it logs to windows...I mean if you see all on the screen until you get to the windows logo..this ... HP Pavilion tx2500z Notebook

The power is on, but I can barely see anything--the monitor is black but I can barely see the menu screen.


Hello,The problem you have is caused by one of two things,\015\012either a blown power supply in the backlight inverter or bad backlight\015\012bulbs. More than likely it is the bad power supply. The problem in the\015\012power supply are ... Envision EN9410 19" Flat Panel LCD Monitor

My Monitor worked great for the last year or so.


More likely to be bad caps in the power suppl;y, see example here: http://s807.photobucket.com/home/budm/allalbums ... Acer AL2423W LCD Monitor

Massive series of problems with IBM Thinkpad


Probably itz either minor case of software corruption/improper ground/cpu fan..or major case of faulty or defective main board/ram/addon/daughter cards....plz do check the following as in order:..the Hardwa ... IBM ThinkPad R40 2897 Notebook

I have a Cornea 1702. It just stopped working altogether. It doesn't even show the menu nor does it search for a signal as it used to while scrolling thru options or select input! I think it's fried, but I remember some time ago i thought it was all done then it started working again. any thoughts?


OK, first off, I'd like to say that I've never worked on the Cornea 1702, but most monitors follow similar designs, especially generic brand monitors.So there are a few things I need to know: What exactly happens when you press the ... Cornea CT 1700 17" Flat Panel LCD Monitor

Black screen on my desktop, and connect pins are broken & bent


You'll get either no signal or missing color(s) if pins are bent or missing.Carefully bend pins back with small needle-nose pliers. Pin 9 is missing by default - if any other pins are missing or broken, you'll need an expert to wire a ne ... E-Machines eMachines Desktop PC

Philips 190S monitor - Urgent!


The lcd has three parts the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, all three take a bit of power from the inverter. The self t ... Philips 190P6EB 19" LCD Monitor

Monitor will not turn on- was working fine a week ago!


Hi this is the way how to examine\015\012what's wrong with your LCD monitors. After you turned it on and the screen\015\012went gray or stopped working, you have to check that if you can see the image on the screen or\015\012not by shining a fl ... Gateway FPD1960 19" Flat Panel LCD Monitor

Monitor stays on for a few seconds then goes out


This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

The monitor is on and seems to be running, have visibility prob.


George, I hope you got IT for free!! You too should find out all you can about LCD cold cathode fluorescent lamps and their electronic ballasts circuits which are called "INVERTERS" and obtain their dc voltage from the monitors "switch-mode-power-su ... Westinghouse L1975NW Monitor

AG Neovo X-17a


Hello,It sounds like you have a monitor with a common problem. After a few years some LCD monitors\015\012will blow a power supply. The problem is caused by parts called\015\012capacitors overheating in the confined space of the monitor. ... Neovo AG 17" LCD Monitor

Black screen after 1/2 second power-up of Sony SDM-HS73


Bratty, do you have a pic on which capacitor this is? Also where I can find a replacement one. My monitor is doing the same thing, nice and bright for 1/2 a sec then goes super dull, you can barley see anything. Thanks,J ... Sony SDM-HS73P 17" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.1140 seconds