Having problems with your eMachines W5243 Refurbished AMD Desktop Computer - AMD Athlon 64 3800+ 2.4GHz , 1GB DDR2, 250GB ?

Installation guide for video card on a emachines w5243

Answers :

Providing this card is compatible with your system you just open the side, take out the screw or clip remove the old card and install the new one, upon boot up insert the CD that came with the card. Or let Found new hardware wizard take over.Also it's handy to have another computer nearby to serial connect to so that you may view that screen.
Repair Help & Product Troubleshooting for eMachines W5243 Refurbished AMD Desktop Computer - AMD Athlon 64 3800+ 2.4GHz , 1GB DDR2, 250GB

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

RESTORE DISC I have an Emachines Desktop. I am trying to do restore cd. Monitor does not seem to have a problem as it is running a test screen but nothing is coming up when I insert CD.

The 'test screen' of the monitor means only that the monitor would display if it receives an input signal.\015\012Make sure it isn't something simple like dislodged video connector on the back of your system box.\015\012You may even want ... E-Machines eMachines Desktop PC

Installation guide for video card on a emachines w5243

Providing this card is compatible with your system you just open the side, take out the screw or clip remove the old card and install the new one, upon boot up insert the CD that came with the card. Or let Found new hardware wizard take over.Also it' ... eMachines W5243 Refurbished AMD Desktop Computer - AMD Athlon 64 3800+ 2.4GHz , 1GB DDR2, 250GB

Disabled video driver. Now unable to reboot emachines T5246

To reset bios with jumper settings: there is jumper on the board that has to be moved to the other adjoining pins, and then back. Hopefully it is marked. For sure check your owners manual, or google your mobo for the location of the jumper and exact ... E-Machines eMachines Desktop PC

New HDD Install Prob

Basic Troubleshooting Tips after Installing a New Hard DriveBased on Seagate IDE hard drives.If you have installed your drive and it does not function properly, perform the following basic checks:Additional Troubleshooting Tip ... PC Desktops

EMachine Video Card upgrade

And as well i am having the same problem because i have a 9800 nvidia and my monitor still not showing up and as well how do i solve that problem ... E-Machines eMachines Desktop PC

C language is not running in full screen mode

Windows Vista takes away a lot of support and convenience for the sheer attractive of flashy user interface. One major feature is the ability of open full screen window for command prompt shell in Windows Vista. When you attempt open or run DOS .com ... PC Laptops

EMachine stopped displaying video (card not working, just mobo)

Hi there\015\012\015\012I would say it's the graphics card that's failed. You might get the same beeps for faulty card as removed card....\015\012\015\012Take it to a shop where they can test a compatible card, before they se ... E-Machines eMachines Desktop PC

Icons and display immages are distorted. Adjustment sittings will not stay consistant even after following the troubleshooting instructions. The device is an Emachine with a windows xp application purchased new in the fall of 2009

Hiplease provide a few more details*system model number?*did you purchased a monitor with the system or are you using an old monitor. is it lcd (thin)? or CRT (big)?*what troubleshooting instructions did you follow? ... E-Machines eMachines Desktop PC

EMachines T3830 PC Desktop - HOW TO INSTALL A VEDIO CARD

There are a couple of things it could be. From simply checking the cable on both ends (computer to monitor) to see if they are loose. It could also be the card is damaged. I would check it with a second monitor to be sure. ... E-Machines eMachines T3830 PC Desktop

EMachine Help Hello,    Need Help w/ EMachine T6528 Motherboard/Power supply/video card! No Picture!! Was told that the Video card  was built in to the motherboard and the power supply fried the video card. Was told to buy a Newer and better video card to replace the old and the computer would recognize it and you disable the old one.. Problem is we can see nothin on the screen! What do we do to solve the problem?    Please Help...        Lost in technology..

If you took the pc in to a repair shop and they diagnosed that as the problem. You will have to install the new vieo adapter in the computer. Then plug in the monitor to see something on the screen. You can go into the bios to disable the other. N ... E-Machines T6528 PC Desktop

I need to disable the onboard video card on the emachine t1090 but I don't have any video output

If you are updating the old built-in video card for a newer o better one (PCI, PCI EXPRESS, AGP) just install it run the computer as normal. , install the proper software containing the drivers for the new video card, restart the computer.and make s ... E-Machines T1090 PC Desktop


Hi eakesj:A number of things here should be checked.First shut down and remove all cards, and power connections to all the drives such as cdroms, hard drives. The power supply should also be looked at and tested for correct voltage ... eMachines T6534 PC Desktop

Video Card Upgrade Problems

Does this computer have an onboard video card?\015\012\015\012If so you will need to disable this feature in the system BIOS.\015\012It should be under onboard devices.\015\012You will need to use the onboard card to enter the ... E-Machines eMachines Desktop PC

Trying to install a video card for my nephew. Nothing fancy. He has an emachines w3650 and has an EVGA geforce9600gt card. The card is pci-e 2.0 512ddr3. When we put the card in his case and start up the screen is just black nothing shows up. Downloaded drivers but when we go to install it just says there is no compatible device. Not sure what to try?

Where do you plug the monitor ? To the onboard video card or the new card? Go to the BIOS and disable the onboard Video card, and plug the cable to the new card only, then install the drivers.\015\012Good luck ... E-Machines eMachines Desktop PC

Producr assistance In November of 2007 I purchased an eMachine model number T5230 desktop pc. My son is having trouble loading some of his games and I would like to know exactly what I need to purchase to increase the speed and memory of this particular model. Thank you. [email protected]

Many of the newer machines for sale now unfortunatly do not include a seperate and powerful video card. The machine comes with an internal video card that shares the machine's memory for video loads; iy is built into the motherboard to reduce the sel ... E-Machines eMachines Desktop PC

Emachines T1100 video card

You need to install driver before putting the graphics card in ... E-Machines eMachines Desktop PC

Ok, i have two things to ask 1: Where is the video card on a emachines W3503? 2: Could a video card swap be done between a W3503 and a W3052? Thank you for viewing :)

1. The emachines W3503 has an integrated ATI Radeon™ X300 based graphics card. It has also a PCI Express (PCIe x16) slot available.2. The emachines W3052 has a NVIDIA® GeForce®4™ MX graphics ... PC Desktops

When connect high speed usb to my older laptop it runs very slowly.can you suggest me what drive to download?

You could have power or bandwidth problems.\015\012Please consult this article and ... IBM ThinkPad T30 2366 Notebook

Installing radeon s9259 graphics card on a emachine t5010

Did you try to after you install the card to go into the control panel and install new hardware in the add new hardware. If I understand you, when you plug the monitor into the new video card it does not turn the monitor on, Even after you install th ... E-Machines eMachines Desktop PC

Can we replace the video card in the emachine T3265?

Hi,\015\012\015\012Yes, the computer comes with 1 agp 8x slot available. You want to look for video cards that are agp and 8x. ... E-Machines T3265 PC Desktop

Can't play divx or xvid media

Could be a codec problem\015\012Use these two, one for video and one for audio and see if you have the same problems, these are the best codecs, don't use those all in 1 packs as they are generally out of date of full of ****.\015\012 ... PC Desktops

Im trying to install a new video card on an emachine and i keep getting a no signal input on the monitor. thats what i started with.

Is the new video card compatible with your motherboard?If it is , can you try connecting your monitor VGA Cable from your video card properly?And also if you are using a PCI Video Card you should try to install it to another slot if there ... E-Machines T6528 PC Desktop

EMachine T6522 monitor says "no signal input" when turned on. tower switch light on and motor seems to be running. Nothing but above message on monitor. Checked both ends of cable and unplugged tower and plugged back in.

This could be an issue of a video card gone bad. I have experienced the same issue firsthand. This could also mean that no RAM is installed. If you have been using this computer previously, the second option is probably not even an option.\0 ... eMachines PC Desktops

Emachines w3609 My emachine w3609 was working fine one night and when I turned it on the next morning, it would turn on but my monitor said no signal and it wouldn't do anything. I got online with tech support and they said to reseat the ram, which I did, still no go. Then they said I would have to buy new memory which I did, a kit of 2 x 1 GB of ram. I put it in and still nothing for a total of 12 times. Then they told me my motherboard ram slots were dead, and I would have to get a new motherb

Hey iluvyakatu\015\012\015\012 Does your emachine has inbuild video card or AGP or PCI card? if one it has AGP or PCI card try to reseat it. If it is inbuild try to use AGP card or PCI card and see what happen. Also try to check whether ... E-Machines eMachines Desktop PC

Emachines single beep

It may be necessary to enter the BIOS setup to disable the integrated video and/or turn on the PCI slot(s).\015\012\015\012It varies but entering the BIOS setup uses one or more keys (sometimes Esc, sometimes F1) that are pressed right after po ... Dell Dimension 4300S (Refurbished) (4300SB8BZ411) PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8211 seconds