Having problems with your eMachines T6420 PC Desktop ?

Problem with my emachine T6420

\015 I turn my computer on and the fan just runs. the monitor says no signal.\015

Answers :

This problem comes due to problem with RAM and CMOS.

first you get RAM outside the CPU and clean properly by brush,and put into the RAM SLOT.

it work.
otherwise ,you have to change RAM.
Repair Help & Product Troubleshooting for eMachines T6420 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

This is the same problem on the T6420 I am not sure how to add.

Your problem is the motherboard, it has blown. See my emachine support pages at:\015\012\015\012http://www.motherboardsrus.net \015\012\015\012and click on the text that says "emachine support" \015\012You can contact me by email on the website or by ... E-Machines eMachines Desktop PC

Problem with my emachine T6420

This problem comes due to problem with RAM and CMOS.first you get RAM outside the CPU and clean properly by brush,and put into the RAM SLOT.it work.otherwise ,you have to change RAM. ... eMachines T6420 PC Desktop

Emachine T6420 Motherboard??Turns off light flashes,very slow

This could be any number of things. Try removing and reseating the hardware - video card, memory, processor (power disconnected of course). The symptoms you describe could be cause by a faulty motherboad component, video card drivers, other operati ... E-Machines T6420 PC Desktop

I have a emachine T6420

Ohk i also have an emachine make sure you have the moniter hooked up all the way i have had the same problem ... E-Machines T6420 PC Desktop

Power on emachine T6420 and moniter is blank. The moniter soon loses contact with the computer. The fan run and power is OK there is no beep code.

If you mean after the computer performs the self test the screen goes blank and stays blank, eventually turning off you are having a hard drive problem. When the computer boots you should see an E-Machines logo and/or a self test on the screen. Tha ... E-Machines eMachines Desktop PC

Need Drivers for 10/100Mbps integrated Ethernet LAN (RJ-45 port)

Here is the download page for the motherboard that is in your computer.The ethernet driver for this mobo is contained within the System nForce4 430/410 System Drivers at this link:\015\012\015\012 ... E-Machines T6420 PC Desktop

Weird blink problem...

That's definitely a hardware (incompatiblity) problem. Download the most updated driver for the graphics card. Also see if there is a monitor driver for the monitor.I understand it worked seamlessly for the emachine but you should switch ... E-Machines eMachines Monitor E15T4

EMachine T3025/Best Buy

Get simple windows xp you just have to format deep with emachines as ntfs ive ran windows complete programs on emachines with out a problem and created straight recovery disk simple to be ran in windows safemode\015\012now your hard drive ... PC Desktops

E machin w3502 wont work at all

I am not sure what you mean "if you reboot you will loose all the data" or do you mean reformat your hard drive? You should be able to reboot your system in safe mode which will load only the minimal drivers for your system to work. Safe mode can be ... E-Machines eMachines Desktop PC

Problem installing sound driver on emachine M2352

I had the same problem after doing an OS reinstall. The owner didn't have her recovery CD and the emachine website audio driver was no good. I was thinking it may of been a hardware issue but after checking all of the cables and finding nothing obvio ... E-Machines M2352 Notebook

Emachine beeps Hey, we just got a new emachine and we have the same problem! We got it mid/end of April but were in the process of moving so it stayed in the box till about a week ago. I hooked it up and when you press the on button it beeps 5 times then you hear the fan kick on like its thinking about starting up but then it just stops and beeps until you turn it off. The monitor says no signal and then goes blank. Any advise?

That would be a problem for e-machine. The beeps are codes. I will try to help, but it is hard to diagnose without looking at it.You can try several things. Open it up and make sure that everything is seated inside. Make sure the memo ... PC Desktops

Emachine reboot problem

First of all remove ant cd from drive when booting up uinless you are using a bootable windows disk. if the problem still persist when then computer starts booting up keep pressing f8 until you get the choice to go in to safe mode. Once in safe mode ... E-Machines eMachines Desktop PC

Emachine- will boot up 3-4 times before computer

This could either be a operating system problem or hardware. \015\012\015\012O/S problem could be actually caused by several things but eventually it might not work at all. It can also be caused by a recent and rather nasty virus going ar ... PC Desktops

EMachine 2862 Desktop Dead On Power-Up

Check all the leads to the hard drive and check that the fan starts spinning when you switch it on if it dont start then the problem is the switch these do often go and can be easily replaced and they are not expensive i had the same problem and foun ... E-Machines T2682 (000002965) PC Desktop

Icons and display immages are distorted. Adjustment sittings will not stay consistant even after following the troubleshooting instructions. The device is an Emachine with a windows xp application purchased new in the fall of 2009

Hiplease provide a few more details*system model number?*did you purchased a monitor with the system or are you using an old monitor. is it lcd (thin)? or CRT (big)?*what troubleshooting instructions did you follow? ... E-Machines eMachines Desktop PC

RE: Emachine T5048 slow from Ducttapeuser

The one main cause of this type of problem is usually heat. You say that the fans are working, did you check to see if your power supply fan is working? Do you feel the temperature inside the PC to be warmed then luke warm?\015\012Also, McAfee ... E-Machines eMachines Desktop PC

Emachine t5026 on and right off

Hi maybe you could try these steps I'm always doing when I experience the same problem as yours. This is only according to my experience fixing desktop computers.1. Try to disconnect all the connection at the back of your computer tower t ... PC Desktops

Emachine T2385 Won't Boot in Normal Mode past Windows XP Screen

The first thing I would check is your video card (usually driver) problem. Start windows in safemode with networking. If this problem has occured after updating the video card driver you may try rolling back the driver to a previous version, otherw ... E-Machines Celeron 2.3GHz (rb-t2385)

Emachine T6216 Automatically Shuts down

Hello Michael,\015\012\015\012I had a customer come in to the shop with their eMachine with the same problem as you. These are the steps I took to solve the problem;\015\012\015\0121) Clean out the computer with c ... E-Machines eMachines Desktop PC

Need large disc support for old emachine, flash bios? or try restore cds?

Hi,\015\012flashing a bios, can render your machine/motherboard useless.\015\012You should always ensure any bios download is from a trusted source. if you experience a power failure, or an incomplete bios file. your computers as good as ... E-Machines eMachines Desktop PC

I am trying to remove the outer case to an emachine t2742. Can you help me?

Hello mbrown1057\015\012\015\012HERE is eMachines listing of downloads, etc. for your T-2742 desktop PC. ... PC Desktops

Problem with Acer Emachine and internet onnections!

Sometimes, the order in which u do things makes all the diffference. \015\012\015\0121. shut down all machines\015\0122. unplug modem and router\015\0123. plug in just modem and wait for lights\015\0124. plug in router a ... Acer Aspire 5100 Notebook

Replaced Mainboard on Emachine w3653, keeps restarting

If it reboots before you make the Windows load screen, chances are it's the power supply. You can go into the BIOS, look at the power setup and with most BIOS's you can watch the DC supplies. If they vary like mad while you're doing this (with the PC ... E-Machines eMachines Desktop PC

Emachine T2542 Won't power on

It looks like your computer's power supply unit is gone. This is common with the eMachine T2542 series. Unfortunately, sometimes this destroys your motherboard as well. ... E-Machines eMachines Desktop PC

I have Emachine 2002 model W4682 problem with all

You should have gotton a cd with the orginal drivers with you machine. They may also be hidden on you machine. \015\012\015\012Remember that the maker of your machine is gateway. I suggest calling them if you have no luck with the emac ... E-Machines eMachines Desktop PC
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6349 seconds