Having problems with your eMachines ET1161-07 Desktop PC ?

I going to buy a emachine et116107 today and i

\015 I going to bye a emachine et116107 today and i would like to know what video cards fit into then because the power suply is only 250 thank you\015

Answers :

That particular model has PCI-Express slot for optional upgrades. So if you decide to upgrade the graphics look for anything with a PCI-E label or PCI-Ex16. If you do get a new card make sure to disable the onboard graphics in the system BIOS prior to installing new card. Instructions can be found via google search
Repair Help & Product Troubleshooting for eMachines ET1161-07 Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I going to buy a emachine et116107 today and i


That particular model has PCI-Express slot for optional upgrades. So if you decide to upgrade the graphics look for anything with a PCI-E label or PCI-Ex16. If you do get a new card make sure to disable the onboard graphics in the system BIOS prior t ... eMachines ET1161-07 Desktop PC

Emachine T2958 will not turn on - has no power


Dear asksforhelp,\015\012\015\012As u have told that u have change the power cord then the second thing u can try that check the SMPS is it working or not to check this u have to know that where is the SMPS where u pluged in the power cor ... E-Machines (T2958) PC Desktop

MAG innovision LT917s problems


K I just fixed mine! I hope you still have your screen dude. Its easy. Take the screen apart, and take the monitor part off, open up the part thats attached to the back, and remove the big silicon peace thats attached with the golden bolts. Look at t ... Mag Innovision LT976S 19" Flat Panel LCD Monitor

Dv2000 series DEFECTIVE VIDEO ADAPTER


Have a pavilion dv9208nr. Same problem. They "fixed" the motherboard 2 1/2 years ago with the same p/n motherboard knowing it would go out again. When I saw the service enhancement I also called and was given the same **** that you got. To fix it wou ... HP Pavilion dv2000t Notebook

Pc card slot will not work


The tech at att and best buy tryed that and I did that more than once and it did not work. Any more ideas?\015\012Thanks ... Dell Latitude D600 Notebook

Cpu upgrade , please help


Tech-gu818, When looking to see what processors a computer will support, try to find out what motherboard chipset is on the motherboard, and the processor socket.The motherboard chipset is the;1) Northbridge chip2) ... E-Machines eMachines Desktop PC

Recently my eMachine desktop computer with MIcrosoft Vista OS had an automatic upgrade to the Vista program installed and will not start-up properly now. It seems to get hung up in the loading process. It has taken hours to start up. Today, it is hung up at the "welcome" mesage for over 5 hours. Any suggestions on how to repair? I have tried going back to a previous configuration, but without success.


You can try to boot up in safe mode hitting F8 while computer is booting up after it is in safe mode go to control panel and then go to add and remove progams find the last update you install and remove it. If that is a no go you will have to restore ... E-Machines eMachines Desktop PC

New Motherboard for Sony VAIO-RX550


I just bought the same box, mostly for the case, power supply, etc, to use as a small server.\015\012Three ARE 2 ram slots, but this motherborad IS limited to 512mb total. And it uses SDRAMM PC133 or 100, not SO DIMM - incompatible. PC133 SDR ... Sony VAIO Digital Studio PCV-RX550 PC Desktop

Emachine heating issues


Hi rebecca_fran, \015\012 Well the system is shutting down for a reason but before you run off & buy a new CPU fan I want you to try something.\015\012Unplug the power cord from the PC. Open your ca ... E-Machines (BFB0505HA) Cooling Fan, Laptop Heatsink, Heatsink With Fan

Emachine T5212 Ram Issue


Did you get this problem fixed? I have the T5212 (which I really like) but want to upgrade the RAM prior to Internet 7, just in case\015\012\015\012Thanks! ... E-Machines eMachines Desktop PC

Note book won't start


Yes it does sound like it could be the motherboard. For the cost of computers today it is probably more worth it to buy a new system. The reason it went bad "just like that" is that electrical components get worn out just like mechanical components. ... HP Compaq Presario 730US Notebook

ASPIRE 5100 LAPTOP


Dear vze4dphy,Okay, now this is not as straight forward as one might first think. There are a number of issues that can cause this symptomatic fault, and it is not made any easier by the companies that are not providing much information o ... Acer Aspire 5100-5022 Notebook

Laptop will not charge..


First of all, it could definitely be something with the battery. Batteries have a finite life-time, and yours might had reached it's end...Anyway, chargers for laptops are quite "unique" for each brand, sometime even for each model. There ... Dell PC Laptops

Emachines problem... PSU works but comp doesnt turn on


Hi,\015\012I don't want to tell you a color because it could be different than the actual. Look at the front of the computer and trace the wire that goes to the switch and follow it to the mother board. If you have a volt meter you could measure the ... E-Machines eMachines Desktop PC

Woleryi ~ emachine per your suggestion....


Here is what you need. Go to a computer retail shop or get it online. You need an IDE / sata USB adapter cable. Here is what it does....you take the hard drive out of the damaged computer and attach the adapter to it, the other end is a USB plug tha ... E-Machines eMachines Desktop PC

I have an emachine lap top I got back in 2005. Everything was working when the other day my computer just shut off. I checked the power cord and there was a tiny hole, but appeared to have power going through as there were sparks. I tried electrical tape for the hole just to see if that was the problem before I go buy another cord, but still the lap top does't turn on. Could it be a more serious problem?


EMachine Towers have a history of the power supplies blowing the chipset on the motherboard. This may be a similar problem check the mobo chipset if there appears to be a small hole or burn mark the mobo will be u/s as you can't change the chipset. ... eMachines E620-5885 Notebook

Emachines I turned off my computer one evening & the next day it wouldn't come back on .The monitor kept saying on signal.I repeatedly turned it on & off & eventually it came back on.This happened 3 weeks ago & each time it is shut down it takes longer & longer to come on. The last time it took 3 days.I notified emachines of this problem & they said to reseat the memory which I did & this was not the problem.Do you have any solutions before I take it to the repair shop?


Are you hearing the fan running or seeing any lights on the system box or keyboard?\015\012\015\012If it is not showing any signs of life, the main power supply has failed; these are built as poorly as anything in your PC and one of the most fr ... E-Machines eMachines Monitor E15T4

Unable to reset passwords after repair


If the PC is asking for a password before it even boots to Windows, that is because the system board itself has had one set up. If the tech who repaired your computer installed a used system board, it needs the password cleared. This is normally done ... Acer PC Desktops

Replacing the inverter?


The Optiquest Q9b has had a high failure rate due to bad capacitors on the power inverter board. Usually you can tell if thecapacitors are bad by looki ... ViewSonic Optiquest Q9b 19" Flat Panel LCD Monitor

Emachine w5243 still shutting down by itself. Sometimes it will shut down during boot up and other times i can get on it and it will stay on for a couple of hours or so.I have ran a virus scan on it and it had 33 viruses and spyware on it and i got rid of those that did'nt help so i got spybot search and destroy and it did'nt find anything. so i formated and installed a new copy of windows vista and that did'nt help.also i have ran disk checkup and it says its fine. Is there somewhere that i can


Its not the hard drive because mine was doing the same thing and i took it to the shop and had it checked out.........the motherboard is shot.....it happens alot of times because it gets too hot.......if you will look at the capaciters behind the hea ... E-Machines eMachines Desktop PC

EMachine Help Hello,    Need Help w/ EMachine T6528 Motherboard/Power supply/video card! No Picture!! Was told that the Video card  was built in to the motherboard and the power supply fried the video card. Was told to buy a Newer and better video card to replace the old and the computer would recognize it and you disable the old one.. Problem is we can see nothin on the screen! What do we do to solve the problem?    Please Help...        Lost in technology..


If you took the pc in to a repair shop and they diagnosed that as the problem. You will have to install the new vieo adapter in the computer. Then plug in the monitor to see something on the screen. You can go into the bios to disable the other. N ... E-Machines T6528 PC Desktop

Pc shutting down possibly overheating when used


Hello,You would be correct in thinking your PC's Motherboard would terminate your session from an overheat at your CPU but your Power Supply can do this as well if it is not sufficient to supply your system while under demand or not. ... PC Desktops

I need emachine etower 600is intel processor - E-Machines etower 600is PC Desktop


The eMachines eTower 600is uses an Intel Celeron III processor that operates at a maximum frequency rate of 600MegaHertz. (600MHz) ... E-Machines etower 600is PC Desktop

Top Gun Afterburner FFB Joystick flop around and grinds with forward stick


Hi, this is a very common problem with people who use those types when they get used alot the ball it sits on wheres and then it dont sit properly causing the problem you are having.The problem is as the parts a plastic they never last th ... Guillemot Top Gun Flight Control System (001-0004-FCS) Joystick

Stuck on emachine screen


Hi thereHit F2 on boot up and get into the bios settings, if it lets you in choose default bios settings, save and reboot, see what happensGood luck ... E-Machines eMachines Desktop PC
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8682 seconds