Having problems with your E-Machines W4685 PC Desktop ?

I need to know what colored wires go where on my customers PC hdd led/ power sw/ and power led

\015 I need the power settings for emachine w4685\015

Answers :

The only reason to have removed them was to switch the board or put the board in a new case..if you put a new board the new board is what you have to go by, look in the book, or take the number off the motherboard and go to yahoo and type in schematic for xxxxx board.
\015\012DO NOT go by emachine model as its worthless, too many models have different hardware.
\015\012This is all basic repair 101, how do you have customers? lol
Repair Help & Product Troubleshooting for E-Machines W4685 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need to know what colored wires go where on my customers PC hdd led/ power sw/ and power led


The only reason to have removed them was to switch the board or put the board in a new case..if you put a new board the new board is what you have to go by, look in the book, or take the number off the motherboard and go to yahoo and type in schemati ... E-Machines W4685 PC Desktop

Installed an Upgrated Mother Brd,in my Hp Desktop Tower,but the power Switch receptacle in the New Mother Brd has 16 pns


You need to track the wires from the case front panel to thier locations: one will be your power switch, one your reset, one hard drive activity light, and one your power light. You want to note and label which light or switch they go to then go to t ... PC Desktops

My a730n will not turn on and the green led power light on the back is flashing


This indicates there is a problem with the Power Supply.You have a weak voltage power rail.Components inside the power supply have failed.Most of the time this due to the power supply, as well as the inside of the computer is ... HP Pavilion A730N (PJ510AA) PC Desktop

How do hook up front panel power switch to motherboard


The simple way is to remove the front panel of the computer trace the wires to the front panel leds, make note of color pair to each led. The using the manual that came with the motherboard locate the schematic for the JFP1 connector on the motherbo ... E-Machines eMachines Desktop PC

Proper connection properly connect wires for front cover of e-machines model t6410 wire lables on front cover H.D.D.LED colors -white & red POWER LED -white & green POWER SW wi -white & black just need to know how to replug them in to right pin locations thank you or if you have schematic for internal wiring please


If u look real close to the pins on the board they will say pwd led and power sw ect ect please keep me posted if you need more help identifying these pins ... E-Machines eMachines Desktop PC

Dc jack How do I replace the dc jack input on the Sony PCGK37


The PCG-K37 (Sony VAIO Laptop) uses a DC Jack soldered to a two-wire jacketed (shielding) cable that is routed under the DVD (tray) and towards the back to the Voltage Board located under the Touch Pad (Mouse) via a white polarized plug. The wires ar ... Sony PCGK37 Notebook

I have a vaio pcg-7l1m which will not power up. Have checked adapter and it's fine. Would like to open laptop and see if input is loose. anything I need to know about getting case open? Having opened other Sony's I know these can be tricky.


Hello,When you say you checked the adapter, I assume you mean you put a meter to it and it is giving 18-19 volts. I also assume that no power means no led's, no fans, no nothing.Before you tear it apart, please try the followi ... Sony VAIO VGN-AR230G Notebook

Monitor stays on for a few seconds then goes out


This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

Need user manual for E139761 intel motherboard.


Hello ganeshfulare;\015\012I have your answer(I hope:). Using j10d10, place wires accordingly;\015\012red goes to 1, black goes to 3(for power led)\015\012green goes to 2, orange goes to 4, black goes to 13(for HDD led)\015\01 ... Intel (SR1400SYSNA) Server

Case wiring I have a Avus A450-3001 computer case and need to know if the colored wires (red,blue,green) are the + leads on the wires from the front of the case to the motherboard.


For the wires that comes in your CPU casing, mostly used for your front panels like power switch, hdd status, power led, etc. It is indicated on the pins itself so you might not be confused. there are some that comes for front panel USB. (with code ... Avus A450-3001 Micro ATX Mid-Tower Case

My dc7100 has a compact power supply with proprietary 24 pin plug. Pretty sure power supply is non-functional (shorted green to black and fan didn't come on). Is it possible to rewire a conventional ATX supply with this smaller 24 pin plug? I need to know pin outs? Thanks


I just spotted this, hence the late solution. Perhaps this will help someone in the future.Yes it is possible.Observe the color code of the insulation of the wires. 1) Orange wires are 3.3 Volts2) Red w ... HP Compaq dc7100 PC Desktop

Need where pwr sw and pwr led and hdd led plug onto au31 motherboard


FIC AU31 mb (a.k.a K7m-NF18G mb)Pin Configuration = PinoutThe Front plastic panel of the computer is the Front Panel.The area of pins on the motherboard that the cables (Wires) go to, is the Front Panel header.Front Panel head ... E-Machines T3092 PC Desktop

I have new case name VJ4000 and I just want put SR5610F motherboard in it .. but problem is that i need to know abt power led , hdd led , reset sw , .. there s green white some blue and white wires too.. i dont know how to connect right ..


If you have the case and the board, you should also have documentation on at least the board pinout.\015\012It is unlikely that you will receive detailed help here.\015\012\015\012If you do not have the board docs, go to the mfr.'s website and ... HP Compaq Presario SR5610F Desktop PC

Chang mainboard - HP Compaq dx2300 Microtower - RT950UTABA PC Desktop


Normal 0 MicrosoftInternetExplorer4 \015\012 /* Style Definitions */ table.MsoNormalTable\011{mso-style-name:"Table Normal";\011mso-tstyle-rowband-size:0;\011mso-tstyle-colband-size:0;\011mso-style-noshow:yes;\011mso-style-parent:"" ... HP Compaq dx2300 Microtower - RT950UTABA PC Desktop

I have a T2958 and toof the face off. Can you


EMachines doesn't give out this kind of info, and I don't have one in the shop. eMachines also had the habit, of using a few different manufacturer's of motherboards. Intel, TriGem, MSI, Asus,and FIC to name five. Plus eMachines wou ... E-Machines (T2958) PC Desktop

I need a diagram for wiring a new power supply to a Gateway 509ge.


Although this problem is a year old, no solution was stated.Stating this in the hope it may help someone in the future;This is Gateway Support, and the main support page for the Gateway 509GE Desktop PC, ... Gateway 509GE PC Desktop

Green light next to power button stays on - no response from computer, totally frozen for up to 12 hrs, then green light goes off, computer suddenly comes on for 5-10 min then freezes again.


Good day sir, hi, You need a thorough check on your PC.\015\012But first try testing the Motherboard, Processor and Memory module. \015\012\015\012As this point you need a friend, that knows how to tinker with your PC\015\012 ... Compaq Presario 5000 PC Desktop

Need to re-attach power button cable, hard drive


The manual for your computer is available from emachines, p.168 shows the info you need (replacing the front I/O panel)\015\012 ... E-Machines eMachines Desktop PC

TRYING TO HOOK UP MU POWER BUTTON NEED TO KNOW


Hi there\015\012The front panel connectors are\015\012 mainly,\015\012\015\012\015\012\015\012\015\012harddisk activity connector\015\012power switch connector\015\012 ... eMachines T6420 PC Desktop

Need replacement keyboard for gateway ml6732 laptop computer, don't have the old one and have no idea how to put it in. Need directs and need to know if screws come with new keyboard, or if it takes screws at all.


You may be able to get from Gateway. From a quick search I just did, it looks like Mundo Corp.com, has one. $49 dollars Here is the link,http://www.mundocorp.com/ml6732.htmlNow I don't have a Gateway Service Manual in front of me, ... Gateway ML6732 Notebook

Need to know how to wire the power socket at back of v25


Have you determined the problem correctly?\015\012The fault maybe the power adapter or the power plug that connects into the laptop's power socket rather than the power socket on the laptop.\015\012\015\012Check power adapter& ... Samsung V25 XVC 2800 Notebook

LCD goes black after few minutes


I would suspect the capacitors on the power supply board. Other sites show that power up problems are due to the aluminum electrolytic capacitors on the power supply board being defective. Replacing the four 470uf 25v capacitors (470 micro fara ... Sceptre X9G-NagaIV 19" LCD Monitor

Had to replace power switch on emachine computer need to know where wires go


I'd like you to look at this motherboard, and compare it to yours. It's an Intel Seabreeze T3 motherboard. My data states it was used in many computers, and the eMachines T3830 being one of them. ... E-Machines eMachines T3830 PC Desktop

PC power switch needs repair or replacement


Hi There,\015\012\015\012You are safe to use a just a two wire connection switch rather then then original 7 wire connection.\015\012The difference is between the 7 wire allows you to turn the tower on and also reset the tower.\015\012if you know the ... PC Desktops

Front panel leads Emachine model T2862


E-machine model T2862 pin-out for the 10-pin front panel header is screen-printed on my Emachine's motherboard, but is so small and far away from the actual pin location, that it is likely being overlooked. If looking into the computer case from the ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.1422 seconds