Having problems with your E-Machines W3410 PC Desktop ?

On working on my mother's emachine W3410. Her

\015 On working on my mother's emachine W3410. Her machine started acting funny and finally would not boot up properly. Wouldn't even send a signal to the monitor and no beeps. I put in a new power supply because I am aware of emachines power supply / motherboard issues. Now the power supply sounds very nices when I but it up. That's the only thing that happens. How do I check the motherboard to know if it is actually bad. I want to do this before ordering another one.\015

Answers :

Test the ram and the cpu, if its not one of those, then it IS the motherboard.
Repair Help & Product Troubleshooting for E-Machines W3410 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

THE SCREEN SMEARS NAD SHUTS DOWN


Hi eakesj:A number of things here should be checked.First shut down and remove all cards, and power connections to all the drives such as cdroms, hard drives. The power supply should also be looked at and tested for correct voltage ... eMachines T6534 PC Desktop

Emachines problem... PSU works but comp doesnt turn on


Hi,\015\012I don't want to tell you a color because it could be different than the actual. Look at the front of the computer and trace the wire that goes to the switch and follow it to the mother board. If you have a volt meter you could measure the ... E-Machines eMachines Desktop PC

Emachine desktop The computer worked fine one day and the next day when we went to turn it on it would not power up. The monitor comes on and on the monitor screen it said monitor working fine check hard drive. Well I can't check anything because the tower has no power. The light around the button doesn't come on and you can't hear any kind of fan starting. Called emachines and the only thing they could tell me was to change outlets, did that, turn power off (no power) leave unplugged for 3 minu


I understand that your cpu is not turning on and the repairer confirmed that it is the issue with the mother board. I suggest you to please check the smps fan spinning or not. If its spinning then then the issue could be with the mother board. If not ... E-Machines eMachines Desktop PC

On working on my mother's emachine W3410. Her


Test the ram and the cpu, if its not one of those, then it IS the motherboard. ... E-Machines W3410 PC Desktop

Emachine T2958 will not turn on - has no power


Dear asksforhelp,\015\012\015\012As u have told that u have change the power cord then the second thing u can try that check the SMPS is it working or not to check this u have to know that where is the SMPS where u pluged in the power cor ... E-Machines (T2958) PC Desktop

Emachine W2646--lights blinking on keyboard,pwr lamp on speaker on,power button on tower YELLOW,NO response! unplugged several hours,now dead,as if unplugged! This happened overnight while shut off completely,no one touched.


If you have a Yellow light on power supply, chances are you have blown the power supply.\015\012Even with a PC unplugged in a Bad Storm, I have seen many PC's and Laptops with Supplies shoot.\015\012If you ... E-Machines eMachines Desktop PC

Emachine t3112 only work in safe mode


You need to run the new hardware wizard as there are differnet drivers needed for the mb ... E-Machines T3112 (RBT3112) PC Desktop

Emachine will not power up


By nothing else, from a technical standpoint this would mean literally nothing, the CPU fan, power supply fan, aux fan, disk drive not spinning up, etc. My experience with EMachines is their motherboards aint the best, have been known to take out har ... E-Machines eMachines Desktop PC

E machin w3502 wont work at all


I am not sure what you mean "if you reboot you will loose all the data" or do you mean reformat your hard drive? You should be able to reboot your system in safe mode which will load only the minimal drivers for your system to work. Safe mode can be ... E-Machines eMachines Desktop PC

Can an eMachine computer be configured for wireless use?


You would need to purchase a wireless card. The card will come with the software you need or you can use Windows to configure.\015\012\015\012Try the D-Link DWL-G510 or similar. ... PC Desktops

Emachine D2880 no power clarification


Your getting power to your PSU, via the green light on your mobo. \015\012verify the PSU has a green light(most emachines do) \015\012it sort of sounds stupid but, check the connection of the cable coming from the front of the case(the wi ... E-Machines eMachines Desktop PC

Emachine t1840 wiring diagram power switch wire to mother board ?


Because there are so many different case and motherboard combinations\015\012sometimes it can be difficult following the instructions for connecting\015\012the front panel, USB header and audio header.\015\012\015\012Below is a few generi ... PC Desktops

EMachines T1840 mother board crash


If its the same model yes it will work, if not then depends its got to to be the same bios, same chip and same chipset. ... HP Compaq nx7010 Notebook

EMachine Model T3828 No power


Greetings! As the first answer suggests, you must be comfortable taking things apart. I've actually just finished diagnosing the same problem on a customer's computer, and Here's what I did.First, I remove the power plug, open up the co ... E-Machines eMachines T3830 PC Desktop

E-Machine T2862 Will Not Power UP


Regarding the power + power LED +HDD LED connections, if you haven't tossed the unit yet -- looking straight down with the box laying on side (e.g. CPU fan blades pointed straight at you) -- GreenWhite + BlackWhite (start with left pin, row nearest t ... E-Machines T2682 (000002965) PC Desktop

No video signal to Monitor.


Lack of video signal is usually 1 of 3 things, Power supply (PSU), Video card or Motherboard (mobo).Situation #1: If you get a blank screen and no sounds or movement it either indicates that the power supply unit (PSU) has failed or something o ... E-Machines eMachines Desktop PC

Emachine problems My emachine is a couple of years old. It has always worked great until this weekend. When you push the button to turn on the computer, the fan starts going fast and loud, but nothing else happens. The fan will stay on until we shut the computer down. The moniter is not showing a connection to the pc as well. Please let me know if you have any ideals.


My emachines is couple of years old but has ran great until now. We had a power outage and ever since then it will not come on, there is nothing. I have replaced the power supply and the mother board and still nothing.Could it be my processor?? model ... E-Machines eMachines Desktop PC

Emachine won't come on


I would check the power supply box,If it is bad,you can get a replacement for under $50 and save the whole computer.\015\012\015\012\015\012Please rate this a fixya. ... PC Desktops

Can emachine t3646 be down graded to windows xp


Yes you can. The Drivers are the most difficult part. It took many google searches and alot of trial and error to fid the correcponding drivers for all the hardware in the computer. So here is the bennefit of all my hard work. hope this will help som ... eMachines T3646 Refurbished AMD Desktop Computer - AMD Sempron LE-1250 2.2GHz, 1GB DDR2, 160GB SATA

EMachines T6528 desktop will not boot up


The power supply fan runs from either 5V or 12 so that only tells you that the voltage for fan operation is present.\015\012\015\012If you don't have a multimeter already, I would highly advise that you buy one.\015\012They are available for &l ... E-Machines eMachines Desktop PC

My emachines wont turn on


Also in addition to the above, try reseating the ram chips..take them out individually and plug them back into their respective slots..might be the miracle cure..If the motherboard fan turns on, it might just be bad memory..replace RAM chips ... E-Machines eMachines Desktop PC

EMachine not powering up.


Most likely the power supply has failed. You will need to replace the power supply. ... E-Machines eMachines Desktop PC

Emachines W2888 will Not Start up


Most likely the system board has failed. If the power supply had blown it is not unusual for the subsequent spike to blow the system board. On the other hand it may have been the system board that failed and the PSU is ok. Emachine system boards are ... E-Machines eMachines Desktop PC

EMachines T3092 MoBo Layout


Here is the website for that particular mother board. This should give you what you need.\015\012\015\012h ... E-Machines eMachines Desktop PC

My emachine T2958 will not turn on but it did work for about 3 weeks and one day it just quit working. I opened it up and plugged it in and a green light came on and is making a buzzing noise. Is it the power supply or something to do with the mother board.


It sounds like a power supply failure. Do you plug it straight into the walll or into a surge protector. If you are close to a best buy, go to geek squad they will diagnose the issue for free but the fix is real simple. Let's just put it this way the ... E-Machines eMachines T3830 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8508 seconds