Having problems with your E-Machines T6528 PC Desktop ?

Have emachines T6528 graphics problem

\015 Computer turns on but fan just runs and screen says check connection cable. have tripled checked everything even installed new nvidia geforce 8400 for PCI. computer still won't boot, screen still says to check cable. Can't get into bios. Please Help.\015

Answers :

If it doesn't boot at all .( this is the reason that you see that message on the screen it means that no video signal came out from the computer ) ..try to change the cable that leads from the pc to the monitor first ...and if the problem its still on ...it have to be something related with the Ram memory or the CPU ....cause these 2 are the only things that can make a system to do not boot at all ...if any other device will not work ..the pc will still boot to bios ..or will still show the devices it finds on start ...even if is not able to succeed with the operating system boot...
so ...either it boots and you can not see anything cause the cable its damaged...( very possible cause this is the case it shows that message ...when the cable its shorted ..or unplugged ) or it doesn't starts at all cause of the memory or CPU ...
Repair Help & Product Troubleshooting for E-Machines T6528 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Weird blink problem...


That's definitely a hardware (incompatiblity) problem. Download the most updated driver for the graphics card. Also see if there is a monitor driver for the monitor.I understand it worked seamlessly for the emachine but you should switch ... E-Machines eMachines Monitor E15T4

Have emachines T6528 graphics problem


If it doesn't boot at all .( this is the reason that you see that message on the screen it means that no video signal came out from the computer ) ..try to change the cable that leads from the pc to the monitor first ...and if the problem its still o ... E-Machines T6528 PC Desktop

Emachine T6528 problem: My monitor wont boot up went i start the computer!


Easiest solution is to connect your monitor to another PC, if still nothing, then your monitor is toast.If you are getting no display at all, and you tried a PCI video card and the onboard, most likely it is your monitor.This ... E-Machines T6528 PC Desktop

Lagging bad on internet low FPS rate


Lag problems wont be anything to do with your monitor, more driver problems or an incompatibility with your new card. Try getting up to date drivers and contact their tech support (the graphics card) and give them your system spec. They will advise i ... E-Machines eMachines Desktop PC

Lack of contrast and faded text


The Ultrasharp monitors need a good video card to drive the quality that you have come to know. The emachines lack the memory and quality to drive the monitor. If you don't have a 16meg video card with DVI, you will only get the basic analog qualit ... Dell UltraSharp 1907FP 19" LCD Monitor

Turn computer on, screen stays blank.


Hi there Eliot.It does sound like a graphics issue, go here and select "downloads" for all the drivers for that computer .http://www.emachines.com/support/product_support.html?cat=Notebooks&subcat=M%20Series&model=M5405 ... E-Machines M5405 Notebook

Emachine T2385 Won't Boot in Normal Mode past Windows XP Screen


The first thing I would check is your video card (usually driver) problem. Start windows in safemode with networking. If this problem has occured after updating the video card driver you may try rolling back the driver to a previous version, otherw ... E-Machines Celeron 2.3GHz (rb-t2385)

Monitor problem - images are "shaky".


Are you using the onboard graphics card? if yes try using a plug in card in the AGP slot to see if it makes a difference.It sounds like either an onboard graphics chip problem or a motherboard problem. come back to me for more emachine support, One o ... E-Machines eMachines Monitor E15T4

Windows Installation Lock-up


Just had this excact same problem with a tech call. Warrenty Corp of America sent out a new MB, HDD, Processor, and Memory, after replacing that all same problem. They then reccomended new recovery CD's, We found some on ioffer.com, I don't know if ... E-Machines T2792 PC Desktop

No display from VGA adapter.


The graphics card won't initialize unless the system passes certain internal checks; most of the time this is caused by the wrong RAM configuration. Make sure the RAM you are using is the right type of RAM for your system; in some cases the system bo ... E-Machines eView 15s Monitor

EMachine Help Hello,    Need Help w/ EMachine T6528 Motherboard/Power supply/video card! No Picture!! Was told that the Video card  was built in to the motherboard and the power supply fried the video card. Was told to buy a Newer and better video card to replace the old and the computer would recognize it and you disable the old one.. Problem is we can see nothin on the screen! What do we do to solve the problem?    Please Help...        Lost in technology..


If you took the pc in to a repair shop and they diagnosed that as the problem. You will have to install the new vieo adapter in the computer. Then plug in the monitor to see something on the screen. You can go into the bios to disable the other. N ... E-Machines T6528 PC Desktop

Ram problem I have a Emachine pc running Vista with 512 Ram but my computer says i only have 502 ram


The fact that 512 MB of RAM is decreased to 502 should not result in any performance problems, as this is a minimal difference. You could have faulty RAM, which would result in the 10MB not being visible to, or useable by, the system. Also, the vario ... E-Machines eMachines Desktop PC

Can't play divx or xvid media


Could be a codec problem\015\012Use these two, one for video and one for audio and see if you have the same problems, these are the best codecs, don't use those all in 1 packs as they are generally out of date of full of ****.\015\012 ... PC Desktops

My Emachines Desktop W5243 works sometimes and others just beeps


You might be having a minor dust particle situation going on. Take the memory out of the system. Get a can of air and blow out the slots on the motherboard where the memory would normally go. Then take the can of air and blow the connectors on bot ... E-Machines eMachines Desktop PC

EMachine Video Card upgrade


And as well i am having the same problem because i have a 9800 nvidia and my monitor still not showing up and as well how do i solve that problem ... E-Machines eMachines Desktop PC

My Emachine Pc keeps cutting off


It could be that your power supply is not putting out enough power to keep up with demand. IE.. during high graphics loads. If you upgraded your graphics card without upgrading your power supply, this could be the problem. Most PC's off the shelf are ... E-Machines eMachines Desktop PC

EMachine stopped displaying video (card not working, just mobo)


Hi there\015\012\015\012I would say it's the graphics card that's failed. You might get the same beeps for faulty card as removed card....\015\012\015\012Take it to a shop where they can test a compatible card, before they se ... E-Machines eMachines Desktop PC

T6532 monitor screen faded


There are a lot of things that can cause this kind of problem. You might try swapping out the cable connecting the monitor if you have an extra, or if you're lucky and own another computer, you can try to use another monitor, or connect another tower ... E-Machines eMachines Desktop PC

Emachine T5212 Ram Issue


Did you get this problem fixed? I have the T5212 (which I really like) but want to upgrade the RAM prior to Internet 7, just in case\015\012\015\012Thanks! ... E-Machines eMachines Desktop PC

Emachine W2047 No BIOS Start Screen


You can test the power button. Remove the wires from the power on pins on the motherboard. Momentarily jump the two pins with a small screwdriver. If the computer starts the power button is bad. If it still doesn't start then something else is wrong. ... E-Machines eMachines Desktop PC

Have Emachine T6528. Was running fine until it would shut off while watching video. Fan runs but display says to check cable. I have tripled checked all connections, cleaned out dust and even bought a new Nvidia PCI GeForce 8400 GS and computer still won't boot up. Can't get into bios. Don't know what else to do. Please help. Can't get anyone from Emachine to respond. Thanks.


Check the cpu use another cpu... or board problem ... E-Machines eMachines Desktop PC

Cant connect pc to tv monitor


You didnt say whaat your graphics card was but if you are using the ONBOARD you might have a couple of problems.\015\012\015\012It might also be useful to know what type of connection you are making. ... E-Machines eMachines T3830 PC Desktop

I don't really have a problem I just want to upgrade the cpu but don't have a support list. I want to put in the best possible one but don't know which one it will support.


Here are the tips on how to upgrade and support to you CPU.The 8400GS isn't much better than the onboard graphics in your Emachines, and the 7200 is NO better than your onboard.\015\012\015\012If you want a noticeable improvem ... eMachines W3507 PC Desktop

Emachines t6528 keeps shutting off on its own. I have been getting more error messages lately. Now it just shuts off whenever. The power button flashes on and off. The only way to get it back on is to unplug it and reboot it.


The flashing power button indicates that the machine has gone into sleep mode. Moving the mouse or hitting a key on the keyboard should wake it up. But if it doesn't...\015\012\015\012Go to Control Panel -> Power Options and change t ... E-Machines eMachines Desktop PC

Computer not communicating a signal to monitor


You can fix that by getting a new graphics card\015\012I'm assuming you have a T3830 emachine.\015\012here's the link to replace video card\015\012 ... E-Machines eMachines T3830 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7896 seconds