Having problems with your E-Machines T6528 PC Desktop ?

E Machine T6528

\015 I have ordered a new ATI video card and 1 GB DDR RAM for my pc. I have never been in a computer before. What do I need to know to install these items myself.\015

Answers :

The installation is usually fairly simple. The hardest part is ensuring you ordered the correct parts for your specific computer/motherboard.

If you did when you open your computer you will see slots for your 1 GB DDR Ram (your existing memory will already be installed) and also some PCI/AGP slots for the ATI video card. These parts can ONLY go in the correct slots so unless your ordered the wrong stuff you should be able to figure it out.

Here is a diagram of a generic motherboard:

http://www.zoomcomputers.com.au/content/images/Motherboard1.jpg

For the DDR RAM you will need to remove your current memory in first. The new memory will go in the first slot on the left or top which is usually labeled Slot 0 or Slot 1 with the others being a higher number. You will want the new memory in the first available slot and any left over old memory you can either keep and place in the corresponding slots or just put aside. Most PCs will have anywhere from 2 to 4 slots for memory so feel free to fill them up. One note though: If your old memory is a lot slower than the new memory it may be best to just discard it. i.e. DDR 233 (old) vs DDR 400 (new). If you add those together the new memory will only operate at 233 speed. Usually it's not a huge deal and I almost always go for more memory and don't worry too much about the speed.

For the ATI video card, I will assume its an AGP or PCI-E card. There should be a slot in the card sections for it if you ordered the right one. If there is a card there already just remove it and line up the card and slots on the bottom just like you did the memory. It can ONLY go in one way so you can't really get it wrong w/o breaking it.


Open up the side door before you do anything else. Look for a stick or RAM that looks like the one your going to be putting in. When you find the extra slot that the RAM is going in, your going to find two latches one on each side of the RAM slot. The memory itself is slotted meaning it can only go in one way. Put the memory in and line up the slot with the hold on the bottom of the RAM. It should snap into place and the latches will hold the memory into place.

As far as the video card is concerned, its going to go into a long white slot, it also can only go in one way, the metal part of the card will face the outside of the back of the computer and the card will snap into place. After you do this you might need to have to put a screw into the metal slot of the video card to keep it in place.

At this point you can hook up the monitor to the external video card and the thing you might have to do is install the drivers for the video card when you get into windows. It might not detect the video card properly which is why you might have to intstall the software for it.

Also do the memory first to make sure the computer sees it and boots up. If it does then turn the computer off and then do the video card. That way if there is a any problems it will be easy to figure out where the problem is right away.

Repair Help & Product Troubleshooting for E-Machines T6528 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Emachines t6528 keeps shutting off on its own. I have been getting more error messages lately. Now it just shuts off whenever. The power button flashes on and off. The only way to get it back on is to unplug it and reboot it.


The flashing power button indicates that the machine has gone into sleep mode. Moving the mouse or hitting a key on the keyboard should wake it up. But if it doesn't...\015\012\015\012Go to Control Panel -> Power Options and change t ... E-Machines eMachines Desktop PC

The drawer for CD/DVD on my T6528 will not open


Hi Grandma Patti,To test the theory of bad drivers follow this instruction >>>>>>Right click on My Computer and select Manage from the sub menu.A computer management window will pop up so select Device ... E-Machines T6528 PC Desktop

Audio Connections I am refubing an E-Machine T6528 for my brother-in-law and he wants new spealers for it. I am not sure what speakers this machine will support. 2.0, or 2.1, or 4.1, or 5.1, or 6.1, or 7.1. It has two speaker outputs, onboard mobo. He does not have the manual for it and I can't find it online. I know that the speaker set inputs has a lot to do with it but I am still unsure. Any help would be greatly appreciated.


6 channel 5.1 ... E-Machines T6528 PC Desktop

E Machine T6528


The installation is usually fairly simple. The hardest part is ensuring you ordered the correct parts for your specific computer/motherboard. If you did when you open your computer you will see slots for your 1 GB DDR Ram (your existing ... E-Machines T6528 PC Desktop

Computer locked and I have never locked it.


Go to Control Panel -> Power Options. On one of the tabs presented in this dialog there is a setting to require a password on wakeup. Just clear that checkmark and apply the settings and you should be set. I run XP in a virtual machine, so this ... Gateway PC Desktops

I use a 37" lcd tv as a monitor for my t6528 e-machine pc. I turned it on one day and the screen was awash with a bunch of colors, then it crashed with "blue screen of death". Now when I turn it on the power light comes on but I get no Video and monitor says no signal or not support. any ideas?.


An easy way to check is if you happen to have a regular vga monitor, hook it up to the computer if you get same results then you'll need to get a new video card.\015\012Mark ... E-Machines T6528 PC Desktop

E machines t6528 video card


  Hi, slot video card can handle a multitude of tasks. If you want, you can now buy one that'll handle the graphics processing for your computer. This is a fine and wise solution if you have modest graphical needs. After all, if a spot of word p ... E-Machines T6528 PC Desktop

Emachines driver I heve Emachines T6528, I need pci simple communications controller. I cant not connect my pc on line,any site that i can dowload this driver. thanks


E-Machine Web-link for your model:\015\012\015\012\015\012\015\012http://www.emachines.com/support/p ... E-Machines T6216 (827103077834) PC Desktop

MY HARD DRIVE COMES ON BUT MY MONITOR READS NO SIGNAL


Go to control panel → system → hardware → device manager → look for any yellow signs with ! \015\012→ r.click → properties → drivers → update driver→ t ... E-Machines T6528 PC Desktop

I want to restore the computer using drive x and not the cd. i dont have reboot cds. cause i want the applications that come with xp then upgrade back to vista.


You should be able to boot an E-Machine reocvery by holding down Ctrl F11 ... PC Desktops

VISTA Business cannot 'see' XP machine in same workgroup


Hey,\015\012Its simple.\015\012You just need to enable file sharing in XP machine.\015\012\015\012Goto\015\012Control Panel> Network Connections> \015\012\015\012On the left panel, \015\012Setup home or office network> \015 ... Microsoft Windows Vista Business DVD 66J-02289-oem PC Desktop

HP Media center 1170m


Hello Moneymakey, have you sorted out your machine's problem?\015\012\015\012I had the same problem on my HP t350.uk machine but with different\015\012symptom. \015\012\015\012It first appeared one year ago when my ... HP Media Center m1170n Photosmart PC Desktop

Monitor resolution re-set with a Samsung MW225 and Windows Vista


Yes if your comfortable with editing your registry.\015\012 \015\012 \015\012 ... Compaq Evo D510 Minitower (Open Box) (OB4700432011) PC Desktop

Power on no boot - PC Laptops


Ok lets try the simple stuff first:ATX reset: sometimes the motherboard can get stuck and hang, some people blame static buildup for it personally I think its just the BIOS hangs similar to the way windows does sometimes. Resolve this by ... PC Laptops

Everytime I try to download certain software that uses MSI, I get this message. "Windows has the following information about this file type. This page will help you find software needed to open your


Hi Princess Tina,\015\012\015\012It sounds like the registry keys needed to recognise and open msi files are missing or incorrect.\015\012Paste the following into a new file (eg. with notepad) and save the file with a .reg extension ... PC Desktops

How do you remove Virtumonde from Windows XP? I have tried malwarebytes and Ad Adware both with no success. I use Avast 5.0 which didn't catch it and Spybot S & D doesn't even spot it as a virus. This virus has sent emails to my contacts list from my hotmail account. Also, if I try to forward an email the recipient only receives a blank email. Any help would be greatly appreciated. Thanks


As far as free tools, you will want to try VundoFix and/or VirtumundoBegone.VirtuMonde manual removal \012instructions:\012\012Kill\012 VirtuMonde processes:\012kopCFEWV.exe\012castlecops[1].exe\012un ... Dell Dimension 3000 PC Desktop

Abnormal shutdown, can't restart


O.k. Let's figure up some costs, then you can decide on fix or new. An operating system disc will run approx $100, you can get one at Walmart or Bestbuy. If you find that the hard drive is bad, you can figure in another $50 ... Dell Inspiron 1000 Notebook

Old Dell Omniplex pci communication serial port needs driver


The PCI communications is for your Dial-up modem. It is probably set to use the only serial port that you mention. The other port is your VGA port. \015\012You can remove or disable the modem to free up your serial port. Since you do not use th ... Javelin Systems Inc (81160083W98) PC Desktop

PCMover program missing configuration screens


Some programs are in ex : express, standart, silver, gold version. The low payed programs as express often do only allow to ex : copy all the things to the new computer, for getting more features you need to purchase to a higher versions. ... Computer Utilities & Maintenance

Hi i work in a engineering company who have a old pc,it must be 20 years old nearly,its a compaq deskpro 386/20e,and i need to back it up,it has procim files and .ncf files,ive tried to back it up ,ive left it over night nothing happens it has a floppy disc drive.theres is a load of data i need to back up,it looks like mds dos,and the menu is fast back plus.


I have a customer were a similar problem, the machine is so old it will not support any new hardware and obviously the Windows version it is running will not support new software.\015\012Because his machine is starting to fail the first thing I ... Compaq PC Desktops

Digitizer pro for XP


Hi Janelle,Sorry if you were waiting long, I must admit I was watching some football. So, from football to embroidery :DI found this on the Janome FAQs:__________________________________________________________ Because\0 ... Acer Aspire 5100 Notebook

My pc does not recognize the DVD ROM What do I do?


CAUSE-It may happen due to some corrupted registry keys in the computer.we can follow the following steps to delete the upper and the lower filters.\015\012 \015\012 \015\012 ... Acer Aspire 5315 Notebook

Mal_vundo-5 removal mal_vundo-5 remova


\015\012Reboot your computer into safe mode. You can do this by going to Start menu > Turn Off Computer > Restart.When your computer starts to boot press the F8 key repeatedly (once every s ... Dell Inspiron 6400 Notebook

Computer does not fire up. I do have steady green light on power supply. All motherboard connections appear to be tight.I have come home before to a beeping noise in the past. After resetting the machine it started fine. This happened approx. 3 various times.


That beeping noise may be due to over heating.Most machines today have a temperature setting that will turn the machine off once the temperature reaches a certain point.Safety feature to avoid damaging your cpu and components. The s ... PC Desktops

Wont boot up


Dear bebjirmav\015\012\015\012usually a machine that refuses/ gets gobby on boot up has either a config error or hardware fault. Now the first thing i tend to do is whip out that hard drive (carefully though as the thing is fairly fragile ... HP Pavilion dv6000z Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1360 seconds