Having problems with your E-Machines T5082 PC Desktop ?

Dual Channel on an Emachines T5082

\015 Hi : )\015\012\015\012i just bought a 2 gb kit (2x1 gb) of DDR2 PC2-5300 Kingson Value Ram. I have a T5082 and it reads both memory modules fine, the only problem is that the computer only runs in single channel , any help would be great : )\015\012\015\012Thanks in advance,\015\012Miko.\015

Answers :

Look closely at the BOLD print

Memory Upgrade for eMachines eMachines\015\012T5082 Computer, the eMachines eMachines T5082 Computer takes the\015\012PC2-4200 DDR2 SDRAM DIMMs. Supports Dual Channel DDR2. Memory Type, and\015\012comes installed with 512 MB (removable) of Memory. You can upgrade your\015\012eMachines eMachines T5082 Computer to up to a maximum of 2.0 GB Memory,\015\012the system has 2 sockets to install Memory, already with 512 MB\015\012(removable) standard Memory installed. For best Computer performance\015\012use the maximum amount of allowed Memory per slot for your Computer.
\015\012\011\011\011\011\011\011\011\011\011\011Choose the following Memory Upgrade for eMachines eMachines T5082 Computer.
Repair Help & Product Troubleshooting for E-Machines T5082 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dual Channel on an Emachines T5082

Look closely at the BOLD printMemory Upgrade for eMachines eMachines\015\012T5082 Computer, the eMachines eMachines T5082 Computer takes the\015\012PC2-4200 DDR2 SDRAM DIMMs. Supports Dual Channel DDR2. Memory ... E-Machines T5082 PC Desktop

Unable to run in dual channel mode

Hello,Welcome to FixYa.Currently there is no bios update for your system. In the course of operating my business I have seen dual channel RAM run in single channel as a result of the CPU in use. This should not be the case in your m ... E-Machines T5082 PC Desktop

Does my w3507 have an agp port

I found the specs below on their website. Sorry only a PCI Enhanced port, NO AGP. Hope this helps. Best Regards, -md\015\012\015\012\015\012\015\012CPU : \015\012Intel® Celeron® D Processor 352(3.20GHz, 512K ... eMachines W3507 PC Desktop

No telephone service

Hi, I checked the specs for this pc and it only has a Ethernet port. See specs below. \015\012 \015\012\015\012\015\012\015\012Specifications\015\012\015\012\015\012\015\012\015\012\015\012CPU1 : \015\012AMD Athlon™ II X2 dua ... PC Desktops

Emachine T5212 Ram Issue

Did you get this problem fixed? I have the T5212 (which I really like) but want to upgrade the RAM prior to Internet 7, just in case\015\012\015\012Thanks! ... E-Machines eMachines Desktop PC

How to install memory for T3642 eMachine - E-Machines eMachines T3830 PC Desktop

EMachines T3642 Computer takes the PC2-5300 DDR2 SDRAM DIMMs. Supports Dual Channel DDR2. Memory Type, and comes installed with 1.0 GB = 512 MB (removable) + 512 MB (removable) of Memory. You can upgrade your eMachines eMachines T3642 Computer to up ... E-Machines eMachines T3830 PC Desktop

My Emachines Desktop W5243 works sometimes and others just beeps

You might be having a minor dust particle situation going on. Take the memory out of the system. Get a can of air and blow out the slots on the motherboard where the memory would normally go. Then take the can of air and blow the connectors on bot ... E-Machines eMachines Desktop PC

I'm Confused about Dual-Channel, How to Activate/Enable it?

Check your user manual for the type of memory you can use. If your computer could use dual channel memory, I think it would come that way. Dual Channel is a pair of special compatable memory modules and only come in pairs. To buy two unpaired memory ... ASUS G1 Notebook

Upgrading concerns I have an Emachine T3256 that has 1 gig memory in it now. I want to upgrade the processor and possibly motherboard. I updated my graphics card, but now I want more speed. How do I find a compatible processor/motherboard that I will get the best results. I recently found out that this board only can hold ddr and not dual channel. Thus I cant get more than 2 gig in here. I don't really want to buy an entire PC. Suggestions?

You can go to e-machines. com and they will give you specs for the model you have. i would invest in a nvidia motherboard. low cost with great speed and very upgradeable. ... E-Machines eMachines Desktop PC

I have a Emachines El 1200 and I think The memory stop working.

You can get up to 4 GB of DDR2 667/800 MHz SDRAM (dual-channel support on two DIMMs)see the specs on this http://suppo ... eMachines EL1200-05w PC Desktop

How do I add memory to my eMachine T2245. I know that it takes DDR PC2100, but can I use 1GB, or do I need to add memory in pairs?

\015\012\011\011 Each memory slot can hold DDR PC2700 with a maximum of 1GB per slot, so a max of 2GB. Your computer does not support dual channel memory or ECC memory. You also do not have to install it in pairs. This would be ideal for yo ... E-Machines T2245 PC Desktop

Cpu upgrade , please help

Tech-gu818, When looking to see what processors a computer will support, try to find out what motherboard chipset is on the motherboard, and the processor socket.The motherboard chipset is the;1) Northbridge chip2) ... E-Machines eMachines Desktop PC

Upgrade problems I'm trying to upgrade to 2GB ram. my w3507 says it's upgradeable to 2GB but when I add the new dual channel (2x1GB sticks) the computer wont post. the memory came together in a "kit" If I add 1 stick and a 512Mb the system shows as 1.00 GB Any ideas? PQI24200-2GBD PC2-4200 1 GB DUAL CHANNEL (times2) 3-3-3-8

Your system comes stock with one stick of DDR2 (512 MB), which means that it is _ not_ dual channel DDR2 memory as dual channel DDR2 must be installed in matched pairs. Try to exchange the new memory for 2G of some single channel DDR2. ... eMachines W3507 PC Desktop

How to change ram setting to video card

If you add more memory to your computer it will allocate more memory to your video. But if your laptop is dual channel capable, you should install a matched pair. This will make you laptop run in dual channel. Which will give you significantly bett ... Toshiba Satellite A15-S127 Notebook

Ram issue with compaq presario 5000 G1 Series

As you can see from the information below there are different requirements for RAM to work stable in your system . Most importand are the RAM VOLTAGE , SPEED , and Configuration of chips. you will need to consult the manual for qualified RAM requi ... Compaq Presario 5000 PC Desktop

Help! Iwoold like the spec of a model GQ5090 desktop

GQ GQ-Desktop-Series GQ 50038A Specification \015\012\015\012\015\012\015\012Memory Type: \015\012SDRAM \015\012\015\012Memory Speed: \015\012PC100, PC133\015\012\015\012Chipset: ... EliteGroup ECS u-Buddie UB-Em22+ PC Desktop

Have a hp DC7100 minitower pc with 4 dimms slots currently have 2 512's installed and thougth maybe adding an additional 2gig dim basically filling 3 of the dimm slots is this configuration valid

\015\012\015\012\015\012■The system will operate in single channel mode if the DIMM sockets are populated in one channel only.\015\012■The system will operate in dual channel Asymmetric mode if the total memory cap ... HP PC Desktops

Windows doesn't recognize recovery partition after os reinstall

The issue you are having involves using multiple systems,...If your emachine came with vistan and you installed xp, you voided your warranty status...However remove your dual boot and stick to vista if you wanna keep your restore partition working pr ... E-Machines eMachines Desktop PC

Can you mix 1gb and 2gb dimms in the same machine (for a total of 6gb)? I added two 2gb 1066 DDR2 dimms (''OCZ'') to a PC that already had two 1066 DDR2 1gb dimms (''Kingston''). I moved the 1gb dimms to sockets 3&4 and put the two 2gb dimms in sockets 1&2. BIOS settings are on ''Auto'' for all memory (5-5-5-15). When I boot the system, BIOS only detects 4GB of total memory (as does Windows 7 64bit). The two 2gb dimms aren't even recognized (yes, they are seated properly). Can I not mix 1 and 2

Your MB is AM3 with 128MB DDR3-1333 built-in, four 1.8 Volt DDR2-1200+ depending on cpu. Have you enabled cpu 64 bit extensions? Tried slowing down your memory bus?\015\012My ASUS use dual channel for dual core cpu. I have 2 yellow and 2 black ... PC Desktops

Installation windows xp emachine t5082

You must find "eMachine" XP USB drivers for your computer.\015\012If all USB support is "enabled" in BIOS, the conflict is with drivers.\015\012XP is loaded with many generic drivers, however eMachines is proprietary and requires eMachine ... E-Machines T5082 PC Desktop

Memory installation my pc came with 2x512mb of memory i added 2x1gb memory to empty slots but my pc would not work- i took out the 2x512mb and put the 2x1gb into the 1st 2 slots and it works fine can you tell me why it would not work with the 2x512 and 2x1gb in together

Most likely it has to do with your chipset. You might also be trying to run the RAM in dual-channel mode. Some systems are extremely finicky in dual-channel. Next time you boot, try looking in the BIOS to check if dual-channel is enabled or not. If i ... Acer Aspire™ T180 PC Desktop

I'm doing a memory upgrade. i have four memory slots, 2 blue and 2 black. i have two, 2g dimms; for dual channel operation do i use the 2 blue slots or the first blue slot and the first black slot(starting from the processor side) i have a hp a6430f pc and a m2n68-la motherboard. thank you

Try them in the same-colored slots, nearest the processor. It seems ASUS (who makes your mobo) has chosen to color code their slots so those of the same color enable dual-channel. If you can't tell from the BIOS detection, try ... HP Pavilion A6430F Desktop PC

No sound out left channel I-Trigue 3300 2.1

Hey, I had that same problem and looked over it with my Dad, who's very technically minded. Here's what he found:** Begin Quote **We also had no/weak sound on the left channel of the I-Trigue 3300 2.1. Here's what we found (starti ... Creative Labs I-Trigue 2.1 3300 Computer Speakers

Installing a third RAM stick causes failure to boot Vista. All RAM sticks work, one at a time or in pairs, in any combination of sockets, but adding a third stick causes blue screen of death and adding a fourth stick causes boot to hang at ''F2=setup'' screen.

As all clarification requests, you should be more specific so we can help you.\015\012\015\012Now your problem could most probably be that the third RAM you want to put does not comply for dual channel. If you want to use three DIMMs in a dual-channe ... PC Desktops

My Dell runs the RAM at single channel instead of dual.

If u have 4 ram slots check they are in the right slot'my old dell ram slots were you need ddr2 ram .yours are ... Dell Dimension 2400 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0735 seconds