Having problems with your E-Machines T3990 (RBT3990) PC Desktop ?
Cant install full 2GB of memory in my emachines t3990
\015 I purchased (2) 1 gb memory sticks both the same. They are 1gb ddr400. I can install either one or the other with one of the original 256mb sticks and it turns on fine. I tested both 1gb sticks and they work. When I install both 1gb sticks together though my computer screen will not turn on. My computer is rated for 2gb. It is a emachines t3990. It has an intel motherboard d865gvhz. I was told a BIOS update may fix my problem, however I go through all the steps and when it reboots it says it was unsuccesful installing it. Any assistance would be great, and if you need more info let me know. Thanks\015
Try removing the cmos battery and put it again and booting up.. since you have bought same kind of ram i dont think it could be a problem.also check for the jumpers in *********** board where you can reset your bios. be sure to read *********** boards manual before this
Repair Help & Product Troubleshooting for E-Machines T3990 (RBT3990) PC Desktop
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Cant install full 2GB of memory in my emachines t3990
Try removing the cmos battery and put it again and booting up.. since you have bought same kind of ram i dont think it could be a problem.also check for the jumpers in *********** board where you can reset your bios. be sure to read *********** board ... E-Machines T3990 (RBT3990) PC Desktop
PC freezing up after memory upgrade
You can use a utility called CPU-Z to find the timing of the memory installed in the PC. Then check your memory documentation (I could find no specs at the Samsung site) to make sure they match in the BIOS. I would remove one stick and see if the p ... E-Machines (T3104) PC Desktop
How to install memory for T3642 eMachine - E-Machines eMachines T3830 PC Desktop
EMachines T3642 Computer takes the PC2-5300 DDR2 SDRAM DIMMs. Supports Dual Channel DDR2. Memory Type, and comes installed with 1.0 GB = 512 MB (removable) + 512 MB (removable) of Memory. You can upgrade your eMachines eMachines T3642 Computer to up ... E-Machines eMachines T3830 PC Desktop
My 2gb ram stick died, so I tried upgrade to 4gb
Most appreciated naturalgal66. Perhaps you would like more information, to put together some of the information I stated in the Clarifications.This is a motherboard block diagram,http://en.wikipedia.org/wiki/File:Motherb ... HP Pavilion a6600f Desktop PC
I am try to upgrade the memory in my W3115 from
The bios has nothing to do with memory, What memory did you have installed, what moder;llkl'j wqpwrl # ... E-Machines eMachines Desktop PC
Cant find motherboard specs. ________________________________________ Hello. I cannot find the specs for my motherboard. Its the comp in my sig and the model number is E946GZT-AM.V1.0 its whatever came in my Acer.
As requested motherboard specifications for the Acer Power FH desktop computer,http://support.acer.com/acerpanam/desktop/0000/Acer/PowerFH/PowerFHsp2.shtml1) Processor Support: Tells you what Intel processors are support ... Acer Power FH PC Desktop
How do I tell me emachine T5212 to recognize newly installed ram?
The Ram specifications for your model are: 1024MB DDR2 (2 × 512MB), 533MHz (PC4200)Expandable to 2GBIf you are using Microsoft Windows, the operating system will recognize the memory by itself, there is nothing you have ... eMachines T5212 PC Desktop
Emachine will not power up
By nothing else, from a technical standpoint this would mean literally nothing, the CPU fan, power supply fan, aux fan, disk drive not spinning up, etc. My experience with EMachines is their motherboards aint the best, have been known to take out har ... E-Machines eMachines Desktop PC
Removing RAM from Acer L320
The other expert's solution here gives you the information and practical\012 steps you need to know about what to do to change the memory in a \012computer.\012\012here is some additional background information you should know \012specificall ... PC Desktops
Windows wont load after memory upgrade Presario R3000
Some time this type of problem occurs either one of you memory module is not working properly check your memory updation in bios then reinstall the windows after ram ugrade ,reinstllation after memory upgrades solves this problem ... PC Laptops
What controls memory capacity?
The maximum amount any computer will work on is 4 gigabytes. You may see some specialty models with 6GB but that is a waste of money because programmers write programs for a maximum of 4GB as that is the industry standard. The maximum memory capacity ... Dell Inspiron 2650 Notebook
I have a EMachine Computer that has 512 MB and I want to changes this DRAM to 2GBs. I have purchased the two 1GB memory items from Tiger Direct and I need information on how and where to install them. Is it safe to remove the 512MB and then install them. I need a skematic on where they are to be installed.
No, you've got it in one.\015\012\015\012I think you'd only have two memory slots anyway.. so shut down, unplug the power, then remove the existing memory. Push the white tabs that are on either end of the memory out and down until the me ... Gateway PC Desktops
Need help finding compatible RAM upgrade
Download cpuz from www.google.com and then run this program to check the fsb of the ram. if it has ddr2 667fsb that means u will have to buy ram of any memory of the same frequency. ... Gateway PC Desktops
Total amount of RAM not recognized by computer
Are the modules the same specs? you may have some incompatibality between them. the board may be reading the ram right it may be you have four 256 sticks instead of 2 of each. read the motherboard manual it might shed some light here. ... PC Desktops
THE SCREEN SMEARS NAD SHUTS DOWN
Hi eakesj:A number of things here should be checked.First shut down and remove all cards, and power connections to all the drives such as cdroms, hard drives. The power supply should also be looked at and tested for correct voltage ... eMachines T6534 PC Desktop
How to install eMachines N-10 memory model W340UA
Flip the unit ove on the bottom you will see a two covers. the one cloest to you headphone jacks is the one you want.\015\012use a small philps screwdriver to remove the cover.\015\012\015\012there is one 512MB 400MHz DDR2-400, PC2-3 ... PC Laptops
1. My ideapad Y430 easy cam doesnot working after i reinstall windows vista ultimate. Not i cant use it for my password. 2. I also try to partition it into four but it doesnot support i can have only two partition. 3. i cant install Windows XP3 in this machin. plese halp me.
This is all I can offer in your situation.....one option is to..use the...Novo buttonThis button functions as a reset button; use with caution. Press the1. Novo button to enter the main interface of OneKey Recovery while thepo ... Lenovo 3000 Y410 Notebook
I've only had my pc for 6 months and only use it for internet browsing and emailing, but its telling me the memory - of 2GB is full! It has now pink left on the pie chart for both drives. I think i have done something wrong when trying to use the auto back up; can you help please, as i wont be able to use it soon! Thanks Pam
Hi, What backups do you take and where do you keep the backups? Are the backups stored on the internal Hard Disk? The memory (RAM) on your computer is 2GB and RAM is a temporary location .. the Hard Disk that is also referred to as HD ... PC Desktops
Acer 7520-5839 two big problems that have to solved
1. http://support.acer-euro.com/drivers/notebook/as_7520.html\015\012\015\0122. Do you have a XP CD? If so, boot the Recovery C ... PC Laptops
Cant find where the ram is to replace with upgraded ram
This is not as easy as the trap door on the bottom but it's not to bad if you just take your time. Remove power supply and battery. Follow all safety rules.The memory is located under the keyboard. Take your time, open the screen to full open p ... PC Desktops
What are the exact instructions for upgrading my
If motherboard part# is\015\012(System Board K8MC51G) - MBEM105554K8\015\012\015\012memory type you need \015\012184-pin DDR DIMMs / Support DDR 333/400 SDRAM / Supports a maximum system memory size of 2GB\015\012\ ... E-Machines eMachines Desktop PC
Can't run a PC game, but its properly installed.
Chances are the desktop PC had a video accelerator and the laptop didnt. Laptops have integrated video cards that share the systems processor and memory to do its work. Video accelerators have their own dedicated CPU and memory and take the video w ... PC Laptops
Dell Dimension 3000 PC Desktop Burned Out w/Memory Upgrade
You have onboard video and cant install a video card. your mb. has nooooo agp or pci-ex. sounds like you installed your memory upside down and fried your motherboard. toasted it even. please dont be mad at me. ... Dell Dimension 3000 PC Desktop
How do I add memory to my eMachine T2245. I know that it takes DDR PC2100, but can I use 1GB, or do I need to add memory in pairs?
\015\012\011\011 Each memory slot can hold DDR PC2700 with a maximum of 1GB per slot, so a max of 2GB. Your computer does not support dual channel memory or ECC memory. You also do not have to install it in pairs. This would be ideal for yo ... E-Machines T2245 PC Desktop
I have an emachines t5082 and tried installing 2GB (2x1GB) they are a 2-pack, DDR2 6400's The board sees 1GB but when I put both in it won't even give me a boot screen or anything, just a black screen. Is there a bios update? and where can i get it, i've already tried emachines/acer and neither want to help me. They say they can't give me what i am wanting and want me to go spend my money on having someone look at it.
EMachines recommends DDR2 at 533MHz.(PC2-4200)A lot of ram memory manufacturers, state you can use DDR2 at 667MHz. (PC2-5300)This is a logical statement due to the fact that a lot of motherboard chipsets, (Northbridge ch ... E-Machines T5082 PC Desktop