Having problems with your E-Machines (T3104) PC Desktop ?

I show on monitor "no signal" Check Signal Cable

Answers :

Dear it cause due to two conditions mainly
\015\012(1) Due to moniter cable fault
\015\012(2) Due to VGA (Graphics card fault)
\015\012check these to things i am sure it will work
Check that the "data" cable between your computer and your monitor is tightly connected at each end.
\015\012Connect the VGA-output port from a laptop computer to the monitor, to see if the monitor works when connected to a different computer.
\015\012Connect a different monitor to the VGA-output port on your computer, to see if that monitor works.
\015\012Failing all the above, the video-card on your computer is the problem, and needs to be replaced.
Repair Help & Product Troubleshooting for E-Machines (T3104) PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor comes up shows "acer" then says no signal and goes black

The interface between the monitor and the cable might need replacement. Please check it. ... Acer AL2016 W 20" TFT LCD Monitor

No signal The TV stopped showing a program and on the screen it read, "no signal". In the household there are two other TVs that operate OK. This is a cable TV setup. Checked the cables and they are all connected firmly

This problem requires you to test both the monitor and the signal input form you cable tv setup. Set the monitor up on a computer and see if it works properly. If it does then you may have a problem with the signal conversion of the cable tv to the ... Envision 19" Widescreen Flat Panel LCD Monitor

Problem with the monitor

Hi,The three boxes represent the built-in diagnostics of the monitor. The letters G is green, B is blue and R is for red, the 3 color guns of the picture tube of your monitor. The words "Self Test" indicates that it is in diagnostic mode ... Compaq FS7550 17" CRT Monitor

NO SIGNAL What do I do?

These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

My Lg Monitor wont show screen (Power Button Flashing)

The monitor is probably on protection.To start unplug monitor\015\012from power and from computer and test computer with different monitor\015\012to find out if it is monitor or computer fault.If it is computer fault and no vi ... LG Flatron L1750S 17" LCD Monitor

My computer does not start up

Hi im josh in cebu phils.may i help you? Friend try to use these solutions i got this in my book.\015\012Dealing with System Startup Problems\015\012There's nothing scarier than turning on your computer and finding it doesn't start. What you d ... PC Desktops

Red light on power up. No image on monitor. Pc fans working.

On a computer mainboard there are usually a number of connecting pins right next to one another called RESET, POWER LED, HD LED etc.The power led often leads to the green LED next your power button to show that the juice is available and on. Th ... Aspire Red X-Cruiser Mid Tower ATX Case without Power Supply (CSASXCRUSRD)

My lcd screen does not show images projected by the computer, when the RGB cord is unplugged it says check cable setting and when adjusted and it picks it up it still shows nothing

Good day sir/maam, there are several reasons why your LCD monitor acts like the one you say. but let us start with the common ones.\015\012\015\012check your PC if there is the video signal going out to your mo ... Computer Monitors


You first take post( power on self test) connect power cord & disconnect signal cable you will see massage no signal check siganl cable then problem will be in cpu this problem may be solved by cleaning dust in cpu if montor shows no display the ... Computer Monitors

Hp pavilion f1930 shows pic for 2 secs. then blank

Rather than guessing, or blaming the computer, I fix the F1903 backlight problem. Power the monitor and using a bright flashlight check the screen to ensure there's an image, or the menu when you press the menu button. Nearly every one of the F1703 a ... HP Pavilion F1903 19" Flat Panel LCD Monitor

Screen goes off showing VGA with cable on the screen

This looks like a bad cable connection. Try using a new cable for the connection between the computer and monitor. If that does not work test you computer on another monitor to make sure you are getting signal output from the video card.Also check th ... Gateway GM5259E PC Desktop

Monitor displaying 'check signal cable'

Make sure the refresh rate is set at 60 hertz before using the new monitor also check the display settings to see if they are set to use the external display also. Yours may automaticaly do this and your partners may not. If this does not help please ... LG Flatron 776FM 17" CRT Monitor

When i turn on my computer all it tells me is sva no signal input please check video signal

No Signal. No signal coming from the computer.The monitor is working, but there isn't any video signal coming from the computer.1.Could be a bad video cable. The one from the monitor to the computer. Do you have another ... SVA-USA VR 17S 17" Flat Panel LCD Monitor

Check signal cable

Hi,You're quite invested in this rig. Most of us PC guys on this board have a setup like yours and we all have our own business were we go onsite and solve problems like these.Your troubleshooting can be done with us but we ha ... Samsung Syncmaster 730B 17" Flat Panel LCD Monitor

When i turn my monitor on it goes on and shows the acer logo then says no signal and just goes off and this just happened one day i have never had any other problems with it before

If you monitor shows no signal that means it is not connected to the computer properly and not getting any video signals from the computer.\015\012You need to check the vga cable properly\015\012Try removing the cable from both ends and and reseat th ... Computer Monitors

Power on - blank (black) screen

Disconnect the monitor signal cable from PC and switch on your monitor. It should show some logo with Red, Green and Blue colors with a message similar to "No signal". If so, your monitor is working fine. Sometimes if the brightness and contrast is ... Dell E152FP 15" Flat Panel LCD Monitor

Nothing on the screen at startup

If you cant get into the setup menu then I would think the monitor is defective,you did not state if you hooked up the monitor to a computer that has a vga port that works. ... LG 22" FLATRON LCD Monitor

Pc starts and runs but wont boot up monitor shows no signal

1) When you turn on the computer, watch and listen for: a) power supply fan, (power is on) b) chassis lights (power is on) c) ticking sound during memory test (the BIOS POST is running) d ... HP PC Desktops

Monitor does not so any display

Hi, Welcome to FixYa.As you tried all these, we can make a conclusion that problem is with your monitor itself.Commonly, monitors has a problem with a bad plug pin at video connector orsolder connections inside the hardware of ... LG Flatron L1951S 19" LCD Flat Panel Monitor

Screen just showing white.

This is definitely a problem with the monitor ONLY. The fact that you don't even see the Gateway splash sign when you power on the monitor or even the symbol indicating, which source you are using is very telling.This sort of problem usua ... Gateway HD2200 LCD Monitor

My monitor says Please check the signal cable? I don't get what the problem might me, my monitor is working, because all it shows is Please check the signal cable. All the cables are connected

Try playing with the input settings on your monitor, its happened to me a few times, but yeah just try to do that. ... Likom Futura LD7 17" CRT Monitor

Monitor beeps when turned on no picture - NetTV DTV 34XR 34" CRT Monitor

Disconnect signal cable if monitor show massage no signal check signal cable then monitor is ok then open cpu check whether dust is in ram then clean the dust and again fit the ram the problem will be solved if not then disconnect ram listen beep a ... NetTV DTV 34XR 34" CRT Monitor

Black Screen on ACER LCD 1916 Monitor

See there is power in monitor and check also that your monitor is getting signal from cpu just remove the data vga data cable from cpu and see is it showing any massage on screen like check signal or any other massage. and check your keybord also by ... Acer AL1916W 19" LCD Monitor

Blank screen on my monitor. Need help plz.ty.

See there is power in monitor and check also that your monitor is getting signal from cpu just remove the data vga data cable from cpu and see is it showing any massage on screen like check signal or any other massage. and check your keybord also by ... Acer AL1916W 19" LCD Monitor

I closed my computer maually after a bug then put it back on. My monitor is still black.

See there is power in monitor and check also that your monitor is getting signal from cpu just remove the data vga data cable from cpu and see is it showing any massage on screen like check signal or any other massage. and check your keybord also by ... Acer AL1916W 19" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7435 seconds