Having problems with your E-Machines T3092 PC Desktop ?

Need where pwr sw and pwr led and hdd led plug onto au31 motherboard


Answers :

FIC AU31 mb (a.k.a K7m-NF18G mb)

Pin Configuration = Pinout

The Front plastic panel of the computer is the Front Panel.
The area of pins on the motherboard that the cables (Wires) go to, is the Front Panel header.
Front Panel header pinout.

The motherboard used in an eMachines T2672 desktop computer is an FIC AU31 motherboard.
Made by First International Computers (Inc.) for eMachines.

http://www.e4allupgraders.info/dir1/motherboards/socketa/au31.shtml

Orient the motherboard like it is in the photo, so we are both looking at it in the same direction.
{Processor to the top, Ram memory slots to the right, white PCI slots to the bottom. The way it sits in the computer case}

The Front Panel header, is a small black rectangular block that sits horizontally, at the far right bottom corner.

It has two rows of pins.
4 across the top, and 5 across the bottom.

(The small rectangular block above it, is for connecting a Power On LED light that has 3 wires. More on this in a moment)

The pins are numbered.
The pins are numbered Evenly across the top, and Odd across the bottom.

Starting from the Left side going across to the Right, on the Top row;
Pins 2, 4, 6, and 8.
There is No Pin 10.

Starting from the Left side going across to the Right, on the Bottom row;
Pins 1, 3, 5, 7, and 9.

A) Pins 1 and 3 are for the HarDDrive activity LED light. (HDD LED)
Pin 1 is for the Positive wire ( + )
(If the LED light is dim when operating, switch the wires around)

B) Pins 5 and 7 are for a Reset switch, IF a Reset switch is used. (Reset button)

C) Pin 9 is Not Used. (NC. No Connection)

D) Pins 2 and 4 are for the Power On LED light, IF it is a 2 wire LED light.
Pin 2 is for the Positive ( + ) wire.
(If the LED light is dim, switch the wires around)

If the Power On LED light has 3 wires:
Use the Power On header above the Front Panel header.
This rectangular block has 3 pins.

Starting from the Left side going to the Right; Pins 1 , 2, and 3.
Pin 1 is for the Positive wire.
Pins 2 and 3 are Ground wires.

E) Pins 6 and 8 are for the Power On switch. (Power On button plastic assembly has an ATX power on switch inside it)

This is a link to a free motherboard manual, for the FIC AU31 motherboard. It is in Zipped file form.
(A Zipped file is a compressed file. It is used for one, to send a large file over the internet)

If you do not know how to unzip a file, post in a Comment, and I'll lead you step by step.

http://www.elhvb.com/mboards/OEM/eMachines/manuals/index.html

In the list on the left side, left-click right on the file name - AU31
Here is a link for the manual for your au31 motherboard. The diagram explaining the front panel headers is on page 12.

http://www.lurkhere.com/~nicefiles/AU31_manual.pdf
Repair Help & Product Troubleshooting for E-Machines T3092 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Need where pwr sw and pwr led and hdd led plug onto au31 motherboard


FIC AU31 mb (a.k.a K7m-NF18G mb)Pin Configuration = PinoutThe Front plastic panel of the computer is the Front Panel.The area of pins on the motherboard that the cables (Wires) go to, is the Front Panel header.Front Panel head ... E-Machines T3092 PC Desktop

Need Diagram for the pwr,reset,pwr led,hdd led speaker connections on the motherboard. Model p5s 800-vm.


Hi there.On the motherboard look for the front panel, it should be\015\012marked PWR and coloured green, also the plug that connects to it should\015\012be marked PWR_SW.Have a look at these pictures for an idea >>>>>> ... ASUS PC Desktops

My t2862 powerlight will not come on but a green led comes on on the main board, nothing else happens. I also disconnected the pwr sw,hdd led and pwr led plugs and don't know which pins they go on. Thanks


On the front panel header where the wires connect, there are two rows of 5 pins. The top row actually has 4 pins with the end one missing, and the bottom row has 5 pins. The first two pins on the top row are for the power LED. The next two pins are f ... E-Machines T2862 PC Desktop

Emachines t3830 I need the schematic for MB I umployed the wire for the push bottom without looking at the way they were plug. Now I do not know the correct aligning of the push bottom wires.


If you look at the motherboard there is usually a diagram labeled "FRONT PANEL HDR" that will tell you which pins are for: HDD LED, PWR LED, RESET, PWR ON. etc. The chart / diagram may be a few inches away from front panel header.the fol ... E-Machines eMachines T3830 PC Desktop

Motherboard pin config


All motherboards have a print beside the pins, \015\012Speaker= "speak", \015\012"pwr s" =powerswitch, "HDDled" red light on front, rst = reset switch [not allways used] "pwr led" Green led, the case wires are usualy marked on the plug ends with th ... Systemax Ascent PC Desktop

Need diagram for...


Dear,\015\012u cant get the diagram for that..\015\012but,\015\012if ur pc is not starting then first, dont plug any HDD cable.. just plug the power cable connector to ur motherboard then see, if u pc gets on.. if it so then plug an ... PC Desktops

Need schematics for front panel , power sw , pwr led , hdd led et


Try this link to Emachines page. After you put in the make and model and stuff you should be able to view the user manual for your machine. If this isn't what you need you are able to contact support from this page and maybe they can direct you to a ... E-Machines eMachines Desktop PC

Motherboard E210882 on Emachines Model W2888 pin configuration


Here is a link to the manual,It is in PDF format ... PC Desktops

Power button wiring


A quick google determined your emachines model w2040 is equipped with FIC motherboard AM37. Download the manual from http://www.fic.com.tw/support/motherboard/motherboard.aspx?model_id=107You'll find the pinout info for your wiring on pag ... E-Machines eMachines Desktop PC

Hp pavilion dv5-1002nr will not power up - HP Pavilion dv1000 Notebook


Let's run through a basic flow chart.1.Plug the AC adapter, (Charger), into the laptop.Is the Power LED light on, and the Battery charging light?[The Power LED light is on the front edge of your laptop, all the way ... HP Pavilion dv1000 Notebook

Need to re-attach power button cable, hard drive


The manual for your computer is available from emachines, p.168 shows the info you need (replacing the front I/O panel)\015\012 ... E-Machines eMachines Desktop PC

HDD led plug, power led plug,dc plug & reset sw plug all plug onto F Panel socket but wich pins? I lost my notes


Would need to know exact brand and model number of motherboard you have in that system before we can answer that one for you. ... Systemax Tiger (SYXS-DC-1000) PC Desktop

I have a T2958 and toof the face off. Can you


EMachines doesn't give out this kind of info, and I don't have one in the shop. eMachines also had the habit, of using a few different manufacturer's of motherboards. Intel, TriGem, MSI, Asus,and FIC to name five. Plus eMachines wou ... E-Machines (T2958) PC Desktop

A power diagram for restoring power for a emachine


Hi there if you look real closley at the wires they are labled such as (pwr)led (reset) (hdd led ) (remote switch this the power for the computer) ect ect now look real closley and you will see the same markings on the edge of the board ... E-Machines eMachines Desktop PC

Had to replace power switch on emachine computer need to know where wires go


I'd like you to look at this motherboard, and compare it to yours. It's an Intel Seabreeze T3 motherboard. My data states it was used in many computers, and the eMachines T3830 being one of them. ... E-Machines eMachines T3830 PC Desktop

Reattach Power LED, Power SW, and HDD LED leads


Try page 18 of this manual:\015\012http://static.tigerdirect.com/pdf/ECS_ECS%20915G-M_Manual.pdf ... PC Desktops

Optimized intel server board 2000 Need Diagram for


On most motherboards the front panel connections are printed in the connectors on the motherboard. When you connect the various LED indicators and when you power up and they do not light up then just switch the connectors around, because they are are ... Intel PC Desktops

Emachine front panel power switch


Here's the Support Link for your desktop. Look under User Guides, Hardware Reference. Also look on the motherboar ... E-Machines T3958 (827103050974) PC Desktop

TRYING TO HOOK UP MU POWER BUTTON NEED TO KNOW


Hi there\015\012The front panel connectors are\015\012 mainly,\015\012\015\012\015\012\015\012\015\012harddisk activity connector\015\012power switch connector\015\012 ... eMachines T6420 PC Desktop

Need wiring diagram for eMachine 20030812 motherboard!!!


You should be able to see the words/letters that go with the jumpers on the motherboard itself. look around the jumper settings area for power, pwr etc. and match them up with your jumpers which should have what the go to on them. ... E-Machines eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop

I can see the wire thats loose connecting my motherboard to the start button how do i fix this


It all depends where it's loose from. If it's loose from the motherboard you will need to open the case and locate the +PW- plug. Normally this is in the lower right hand corner of the motherboard where the other front panel wiring is attached. In f ... PC Desktops

Need to know how to wire the power socket at back of v25


Have you determined the problem correctly?\015\012The fault maybe the power adapter or the power plug that connects into the laptop's power socket rather than the power socket on the laptop.\015\012\015\012Check power adapter& ... Samsung V25 XVC 2800 Notebook

Power Button wire to mother board power led power sw HDD Led . what pin connects to the three wires from power button. Led Power wire to what pins, HDD Led to what pins and power SW to what pins on the mothe board.


There are may motherboards, but most have writing on them as to what is suppose to plug where. For example, for the power switch, the lettering might be "Pwr" or "Power" or "Pwr sw". The pins are usually together and should fit the plug on the end ... E-Machines eMachines Desktop PC

I need a manual for a motherboard


This link looks like what you need i hope this helps :-)http://support.packardbell.com/uk/item/index.php?i=instr_connectors_MCP61PM-AM&ppn=PB82113801 ... PC Desktops

HP Pavilion ze4125 PC Notebook will not boot up


I myself have a ze4125us.First thing you want to do is look at the green LED on the power pack to see if it is lit.  IF it is not, then your power supply is most likely fragged and you'll need a new one.  It's easy to find them ... HP Pavilion ze4125 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0419 seconds