Having problems with your E-Machines T3025 PC Desktop ?

No monitor signal and hard drive not spinning? (eMachines T3025)

\015 The problems are obviously related...\015\012I have P6 plugged into the HD...I would need a diagram to check if this is right...I can't seem to find the P4 tho...When I turn the power button on, the fans start up, but the hard drive doesn't spin. I need a wiring diagram anyways, so if anyone has a link, that would be helpful.\015

Answers :

Wiring diagram? Usually you just plug in the 4 pin molex connector. If its not spinning the HDD is damaged and needs to be replaced.

Also I can tell you the Wires are Yellow=12v Black=ground RED=5v and orange=3.3v

Repair Help & Product Troubleshooting for E-Machines T3025 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

No monitor signal and hard drive not spinning? (eMachines T3025)


Wiring diagram? Usually you just plug in the 4 pin molex connector. If its not spinning the HDD is damaged and needs to be replaced.Also I can tell you the Wires are Yellow=12v Black=ground RED=5v and orange=3.3v ... E-Machines T3025 PC Desktop

When I turn it on, only the fans run. I cannot hear the hard drive run and the hard drive light on the bezel is solid yellow


EMachines were designed to be Budget computers. As such the company used cheap Power Supply's. Cheap components within the power supply have failed. The power supply only has enough power to light, lights, and spin fans.Solution is to rep ... E-Machines T6216 (827103077834) PC Desktop

Computer randomly fails to boot


How many video cards do you have installed? ... E-Machines eMachines Desktop PC

Hp computer. hard drive light is solid yellow pc non working


What has transpired is the power supply is bad. Electrolytic Capacitors inside have failed. These capacitors relate directly to the voltage power rails of the power supply. They are filters.Little more detailed.Your computer power s ... Sony VAIO Digital Studio PCV-RX540 PC Desktop

If i open the laptop the illuminated lines appear on the screen and i cant see a single thing and i hear the sound of hard disk which is spinning but the blank screen irritates me what i do


It's possible your laptop screen is going bad. Here's something you can try. Get an old monitor from a desktop. Power it up and hook it into the video port in the back of your laptop. Hit the Fn key and the F7 key at the same time. This tells your la ... Dell Latitude D630 PC Notebook

Princeton Monitor is "out of range"


Hi,The monitor is not getting a video signal. This is probably an issue with your computer. It could be a memory, hard drive or motherboard issue. Make sure you are getting power to the pc (fans running, hard drive spinning...etc ... Princeton Digital VL1916 19" LCD Monitor

Emachine will not power up


By nothing else, from a technical standpoint this would mean literally nothing, the CPU fan, power supply fan, aux fan, disk drive not spinning up, etc. My experience with EMachines is their motherboards aint the best, have been known to take out har ... E-Machines eMachines Desktop PC

Toshiba M35X-S149 laptop, lose video on boot-up.


... Toshiba Satellite M35X-S149 PC Notebook

I replaced my AMD 3600 + processor (2.0GHz 256KB L2 Cache 1600MHz) with a AMD 2.7GHz 1MB Cache 45W on my emachine 3616. My computer powers up, but doesn't boot,and my monitor is not getting a signal. I hear the fans go on,the hard drive spin and that's it. Any suggestions?


Look fro the jumper setting to clear the nv ram or reset the bios. you remove the jumper. power system then put the jumper back to reset it.check motherboard specs to see if it supports that processer ... PC Desktops

My HP Pavilion a6300f powers up but no signal to the monitor


It could be the motherboard, try resetting the the bios first by either taking the lithium cmos battery out and then replacing after 30 secs or finding the the cmos jumber and unshort it for 30 secs, and reboot the mechine.If the same and ... HP Pavilion Desktop a6300f Intel Pentium Dual-Core E2180 Desktop, Refurbished

I recently moved my computer into my new condo and have not been able to use it since. The problem seems to be with the monitor. I turn on the computer and the fan comes on but the monitor displays "no signal" and then goes dark but the light one the front still flashes indicating it is getting power. The last time I moved my computer from one room to another, the monitor suddenly couldn't/wouldn't display colors accruately - no red. Attempt to adjust the color by using the monitor's controls we


Lack of video signal is usually 1 of 3 things, Power supply (PSU), Video card or Motherboard (mobo).Situation #1: If you get a blank screen and no sounds or movement it either indicates that the power supply unit (PSU) has failed or somet ... E-Machines eMachines Desktop PC

Emachine desktop The computer worked fine one day and the next day when we went to turn it on it would not power up. The monitor comes on and on the monitor screen it said monitor working fine check hard drive. Well I can't check anything because the tower has no power. The light around the button doesn't come on and you can't hear any kind of fan starting. Called emachines and the only thing they could tell me was to change outlets, did that, turn power off (no power) leave unplugged for 3 minu


I understand that your cpu is not turning on and the repairer confirmed that it is the issue with the mother board. I suggest you to please check the smps fan spinning or not. If its spinning then then the issue could be with the mother board. If not ... E-Machines eMachines Desktop PC

Emachine w3410 monitor says no signal


... E-Machines eMachines Desktop PC

Compaq presario sr1950nx monitor wont turn on the usual green indicating its on is now orange...tried to inspect the video cable and video connectors for damage its seems fine.....the hard drive is working but the fan seems a little loud.


It sounds to me like the computer is coming on but not booting. That is, there's power but it isn't actually starting up, so no video ever gets to the monitor. Until there is a video signal from the computer (you're calling it the hard drive), the po ... Compaq Computer Monitors

Cannot see the bios screen


I would try removing, the cd drive,hardrives out so all you have connected is the processor, and ram. If two sticks dont work try one. Try this as a starting point too see if you get a display signal from the monitor, and the bios. Also try putting i ... Gateway MT3705 Notebook

Signal has gone - ViewSonic VX2235WM Monitor


If the monitor comes on and displays a message like "no input signal" or something similar, it's working properly but there is nothing coming from the computer. People often think that the computer is working and the monitor is at fault, when in fact ... ViewSonic VX2235WM Monitor

I get nothing on the monitor when it starts up!!!!


I assume you have had the side panel off to watch the cpu fan spin up? if it does spin up and you get no bios beeps, then the fault is with the motherboard or CPU, most probably the motherboard. Problem sounds like capacitors blown or leaking ( have ... HP Compaq Presario SR2170NX (RK549AA#ABA) PC Desktop

Trubleshoot Motherboard what is mother board prob and how can find n fix them....


More than 70% of all computer problems are related to cabling and connections. Ensure all cables are connected and connected firmly. IDE and floppy ribbon cables and power cables can often go loose. Ensure microprocessor, memory modules, and adapters ... PC Desktops

I have a dell 2400 an it will not come on but the mom brud will lit up can you help


If you turn it on and there is no sound of a fan running or the hard drive spinning up, then you will be needing a new power supply.If you hear the fans running but there is no signal on the monitor, you might have a different hardware problem. ... Dell Dimension 2300 PC Desktop

No video signal to Monitor.


Lack of video signal is usually 1 of 3 things, Power supply (PSU), Video card or Motherboard (mobo).Situation #1: If you get a blank screen and no sounds or movement it either indicates that the power supply unit (PSU) has failed or something o ... E-Machines eMachines Desktop PC

Computer monitor is blank. No signal is received at any time. Currently using motherboard VGA port. I tried 2 different monitors and 2 different VGA cables. I then installed a new graphics card but still nothing. Fans are working and I can hear the hard drive spin up. DVD drive works. Audio does not work. Any ideas?


Disconnect all PCI Cards and unplug power to all Drives then reboot your computer using the motherboard VGA port to see if the monitor will POST. If you still have a blank screen you most likely have a bad motherboard. ... PC Desktops

Emachine t3092, no video, can't find certain desktop files


If they're not on the drive, they're not on the drive. Your only other option is to search the free disk space for the remainder of those files. For that you can use the free trial of ... E-Machines eMachines Desktop PC

Gateway MT3421 Laptop start-up Issues


Start by removing the battery completely, and plugging the power cord into the wall socket. If the power indicator light comes on at the converter on the cord, your power cord is fine. Then plug the power cord into the computer. If the computer star ... Gateway MT3422 RTL Notebook

Blinking on and off


No offense, Tyson, but would you mind explaining your question a bit better? You wrote "when i out the power cable in it"and that really confuses me. Did you unplug the power cable or did you plug it in?Also, how long ago did this happe ... E-Machines eMachines Desktop PC

This is the same problem on the T6420 I am not sure how to add.


Your problem is the motherboard, it has blown. See my emachine support pages at:\015\012\015\012http://www.motherboardsrus.net \015\012\015\012and click on the text that says "emachine support" \015\012You can contact me by email on the website or by ... E-Machines eMachines Desktop PC
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.4318 seconds