Having problems with your E-Machines T2984 PC Desktop ?
Emachine T3624 will not power up
\015 I just got homw from a trip. My emachine T3624 will not power up at all. You press the power button, nothing happens. Hold in the power button nothing happens.\015\012I have check power strip, OK, monitor, printer, scanner, all work.\015\012Just computer does not light up or power up.\015\012Anty ideas\015
Emachines are notorious for having faulty power supplies. If your lucky you just need to replace the power supply. I've seen a lot of them where the power supply also fried the motherboard.
\015\012Please don't forget to rate this solution.
\015\012Please don't forget to rate this solution.
Repair Help & Product Troubleshooting for E-Machines T2984 PC Desktop
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Emachine T3624 will not power up
Emachines are notorious for having faulty power supplies. If your lucky you just need to replace the power supply. I've seen a lot of them where the power supply also fried the motherboard.\015\012 \ ... E-Machines T2984 PC Desktop
Emachine T3624 has no power at all
Sounds like the power supply may have gone. try replacing it. or using a old PSU lying about ... E-Machines eMachines Desktop PC
Unplugged power button from emachine t3624 forgot how to
If you can not see a "+" and "-" sigh on the connector as well as on the motherboard, then try it both ways. If you get it wrong the first time, it will not harm anything, just plug it in the other way if it does not work. Good luck! ... eMachines EL1210-11 PC Desktop
Computer powers on, but does not boot on an emachines t3624. replaced the power supply
If the fans come on and BIOS does not post (initial screen upon power up), you likely have a mainboard or CPU issue. If a chip fan failed, or your box overheated, your CPU could be fried. Or possibly something on your motherboard got taken out due to ... PC Desktops
Emachine T3624 desktop PC won't turn on?
I can guarantee 100% you have a bad motherboard. I have seen this exact problem with hundreds of E-machine PC's (especially your particular model).\015\012\015\012What happend is the power supply went bad and took the motherboard with it ... E-Machines eMachines Desktop PC
I would like an internal view of eMachine T4150 to be sure everything is connected correctly
There's a bit of a toughie! eMachines doesn't like to give out this information, lyndapalimas, and I don't have one sitting in my shop.eMachines used four different motherboard manufacturers, to my knowledge. TriGem, Intel, FIC, and MSI. ... PC Desktops
EMachine no power
Ok for a start the power switch is not green and white that is the power led, you need to look for a red and black wire normally marked on the connector and motherboard as pwrsw or pswitch.\015\012if you believe it to be the switch unplug the c ... E-Machines eMachines Desktop PC
I have a T2958 and toof the face off. Can you
EMachines doesn't give out this kind of info, and I don't have one in the shop. eMachines also had the habit, of using a few different manufacturer's of motherboards. Intel, TriGem, MSI, Asus,and FIC to name five. Plus eMachines wou ... E-Machines (T2958) PC Desktop
I have emachine w3400 not powering . plz help
I found this right on this website, hope it works!As for the fans, make sure your connections are tight and in the proper sockets. ... AMD eMachines Desktop System w/ 17'' CRT Display, 2.0 GHz Athlon 64 3000+ (W3400)
2 emachines won't boot
Are you attaching them properly\015\012if so then it is something other then power supply\015\012something has caused both power supplies to blow\015\012have you installed anything in the first emachine you talk about ... E-Machines eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop
EMachine will not turn on.
Sounds like the power supply is faulty. Power supplies are very dangerous to try and repair, even for qualified technicians. I would also suggest not trying to plug it in or turn it on until the new power supply is in place. Faulty power supplies ... E-Machines eMachines Desktop PC
EMachine T2958 - No power
Yea that's right.Once the PSU has power the tester is powered on too. ... E-Machines eMachines Desktop PC
Emachines e4026 non-responsive
I don't think it's an overheating CPU. It would stay on for a bit longer if it was that.\015\012\015\012My best guess is a power supply issue. Either your power supply is bad, or more likely something is pulling too much power from it. Emachines a ... E-Machines eMachines Desktop PC
2 year old E machine
Dear zmatt,\015\012\015\012Looks like the power outlet or UPS may be at fault. Try a different outlet. That's all I can thik of.\015\012\015\012Good luck! ... E-Machines eMachines Desktop PC
E-Machine T2862 Will Not Power UP
Regarding the power + power LED +HDD LED connections, if you haven't tossed the unit yet -- looking straight down with the box laying on side (e.g. CPU fan blades pointed straight at you) -- GreenWhite + BlackWhite (start with left pin, row nearest t ... E-Machines T2682 (000002965) PC Desktop
E-machine 5220 power up
Emachines have notoriously cheap power supplies. Often, while the power supply itself doesn't fail, it causes the failure of motherboard components, essentially trashing the computer.Try the following:First check and make abso ... E-Machines eMachines Desktop PC
No power on my emachine
The power supply might be okay but the system board could be bad and not turning the power supply on when you press the power button.On this page:http://www.helpwithpcs.com/courses/power-supply-basics-inc-pinouts.htmabout midw ... E-Machines eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop
EMachine 2862 Desktop Dead On Power-Up
Check all the leads to the hard drive and check that the fan starts spinning when you switch it on if it dont start then the problem is the switch these do often go and can be easily replaced and they are not expensive i had the same problem and foun ... E-Machines T2682 (000002965) PC Desktop
Had to replace power switch on emachine computer need to know where wires go
I'd like you to look at this motherboard, and compare it to yours. It's an Intel Seabreeze T3 motherboard. My data states it was used in many computers, and the eMachines T3830 being one of them. ... E-Machines eMachines T3830 PC Desktop
EMachine T2824 does not turn on. Power cord/power supply seems O.K.
There are just too many eMachine models to be familiar with every one, however, as a preliminary inspection, remove the side panel, and turn the computer on to see if you see a green "Health" light. This will give you an initial clue as to how to pur ... E-Machines (T2824) PC Desktop
Toshiba Satellite 1400
To Access the Bios Setup Utility Here Is A List Of Key Commands And The Make/Model They Are For..\015\012\015\012Acer - Aspire, Power, Veriton, Extensa, Ferrari, TravelMate, Altos\015\012\015\012 ... Toshiba Satellite A35-S159 Notebook
I accedentally knocked the power wires off inside the big box i cant think of the name on my emachine w3507 how do i put back together
Power On switch, (Button), wires from the front panel that go to the motherboard? I could really use the name of the motherboard, to try to get you this information. I don't have an eMachines W3057 sitting in front of me, at the mom ... eMachines W3507 PC Desktop
When I turn it on, only the fans run. I cannot hear the hard drive run and the hard drive light on the bezel is solid yellow
EMachines were designed to be Budget computers. As such the company used cheap Power Supply's. Cheap components within the power supply have failed. The power supply only has enough power to light, lights, and spin fans.Solution is to rep ... E-Machines T6216 (827103077834) PC Desktop
Need to know what parts compatable to ATX-1523D for an emachines T-1090
It's a Small Form Factor power supply. 4.9 inches Wide, 2.5 inches Tall, and 3.9 inches Long.Put's out a maximum of 150 watts, (Supposedly)Has the following power cables;A) (1) 20-pin ATX main power cable: ... E-Machines T1090 PC Desktop
Emachine 5210 had this machine a few years now , but it has gone off only the fans are running and a yellow light on the front , and no other response or screen coming up , the only way to stop the fan is to pull the plug out , got any sugestions please
Emachines used to use a poor quality power supply made by Bestec, I believe the quality is supposed to have improved in the last few years but inconsidering the number of dead Emachines that wind up in my workshop I doubt it.\015\012The problem ... E-Machines eMachines Desktop PC