Having problems with your E-Machines (T2824) PC Desktop ?

Need motherboard wiring for a t2824 especially for power switch, pwr led and hd led

Answers :

The pins for these wires are usually located on the bottom right corner of the motherboard - near the cmos battery.
\015\012The pins are labelled on the motherboard.
\015\012The wires are also labelled.
\015\012All you need to do is to make sure that you match up the wires with the correctly labelled pin. There are 2 banks of pins. Labels are on both banks, but they're for different functions. Just make sure you have the wires on the right pins on the right bank.
Repair Help & Product Troubleshooting for E-Machines (T2824) PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Need motherboard wiring for a t2824 especially for power switch, pwr led and hd led

The pins for these wires are usually located on the bottom right corner of the motherboard - near the cmos battery.\015\012The pins are labelled on the motherboard.\015\012The wires are also labelled.\015\012All you need to do is to ... E-Machines (T2824) PC Desktop

Need where pwr sw and pwr led and hdd led plug onto au31 motherboard

FIC AU31 mb (a.k.a K7m-NF18G mb)Pin Configuration = PinoutThe Front plastic panel of the computer is the Front Panel.The area of pins on the motherboard that the cables (Wires) go to, is the Front Panel header.Front Panel head ... E-Machines T3092 PC Desktop

Need to re-attach power button cable, hard drive

The manual for your computer is available from emachines, p.168 shows the info you need (replacing the front I/O panel)\015\012 ... E-Machines eMachines Desktop PC

Had to replace power switch on emachine computer need to know where wires go

I'd like you to look at this motherboard, and compare it to yours. It's an Intel Seabreeze T3 motherboard. My data states it was used in many computers, and the eMachines T3830 being one of them. ... E-Machines eMachines T3830 PC Desktop

I can see the wire thats loose connecting my motherboard to the start button how do i fix this

It all depends where it's loose from. If it's loose from the motherboard you will need to open the case and locate the +PW- plug. Normally this is in the lower right hand corner of the motherboard where the other front panel wiring is attached. In f ... PC Desktops


Hi there\015\012The front panel connectors are\015\012 mainly,\015\012\015\012\015\012\015\012\015\012harddisk activity connector\015\012power switch connector\015\012 ... eMachines T6420 PC Desktop

Where does the pwr sw plug go to on the motherboard

There is no way to tell you exactly where it goes without knowing the make and model of the motherboard. However all motherboard label the connection point on the board itself. What you are looking for is usually located in the lower right hand corne ... Gateway DX4200-09 PC Desktop

I need a diagram for wiring a new power supply to a Gateway 509ge.

Although this problem is a year old, no solution was stated.Stating this in the hope it may help someone in the future;This is Gateway Support, and the main support page for the Gateway 509GE Desktop PC, ... Gateway 509GE PC Desktop

I have a T2958 and toof the face off. Can you

EMachines doesn't give out this kind of info, and I don't have one in the shop. eMachines also had the habit, of using a few different manufacturer's of motherboards. Intel, TriGem, MSI, Asus,and FIC to name five. Plus eMachines wou ... E-Machines (T2958) PC Desktop

Need manual to put wiring back correctly please ta muchly

This is MSI/Support and the download page for the MSI MS-7104 V1.0Motherboard Manual in Zip file form,http://www.msi.com/index.php?func=downloadfile&dno=4036&type=manualGranted, it's not the 2.0 ver ... PC Desktops

Motherboard pin config

All motherboards have a print beside the pins, \015\012Speaker= "speak", \015\012"pwr s" =powerswitch, "HDDled" red light on front, rst = reset switch [not allways used] "pwr led" Green led, the case wires are usualy marked on the plug ends with th ... Systemax Ascent PC Desktop

Emachines t3830 I need the schematic for MB I umployed the wire for the push bottom without looking at the way they were plug. Now I do not know the correct aligning of the push bottom wires.

If you look at the motherboard there is usually a diagram labeled "FRONT PANEL HDR" that will tell you which pins are for: HDD LED, PWR LED, RESET, PWR ON. etc. The chart / diagram may be a few inches away from front panel header.the fol ... E-Machines eMachines T3830 PC Desktop

My t2862 powerlight will not come on but a green led comes on on the main board, nothing else happens. I also disconnected the pwr sw,hdd led and pwr led plugs and don't know which pins they go on. Thanks

On the front panel header where the wires connect, there are two rows of 5 pins. The top row actually has 4 pins with the end one missing, and the bottom row has 5 pins. The first two pins on the top row are for the power LED. The next two pins are f ... E-Machines T2862 PC Desktop

Installed an Upgrated Mother Brd,in my Hp Desktop Tower,but the power Switch receptacle in the New Mother Brd has 16 pns

You need to track the wires from the case front panel to thier locations: one will be your power switch, one your reset, one hard drive activity light, and one your power light. You want to note and label which light or switch they go to then go to t ... PC Desktops

A power diagram for restoring power for a emachine

Hi there if you look real closley at the wires they are labled such as (pwr)led (reset) (hdd led ) (remote switch this the power for the computer) ect ect now look real closley and you will see the same markings on the edge of the board ... E-Machines eMachines Desktop PC

My hp pavilion a336n will not turn on. When I plug the power cord in the light on the back of the hard drive will turn on, but when I press the power button nothing happens... any suggestions?

To resolve this issue you may need to open the chassis (the computer cabinet). You can call HP specialized support for help but they charge you for the support. You can call them at 866-211-5207. \015\012\015\012OR - Follow the given step ... HP PC Desktops

Need a manual for a oct103 motherboard, know where I can find this???

Oh well, let me put this puppy into a solution then, and see if you'll be kind enough to rate it. :)Motherboard made October 10, 2003 for a Dell Dimension E521?\015\012 \015\012http://support.dell.com/support/edocs/systems/dim ... Dell Dimension E521 AMD Athlon 64 X2 Dual-Core 3600+ , 1 GB DDR2 SDRAM , 250 GB EIDE SATA H... PC Desktop

Wires from switch came unplugged (white and black) where do they

Power On switch (Button)? Restart switch? Speakers?Wires came loose from the motherboard?Should like you to see if you can trace the wires back to the front panel, (Where the Power On button is located Granted, this may be a little tough ... E-Machines eMachines Desktop PC

No power and auxiliary power led on in orange

Could be a bad power supply, bad motherboard, bed device such as a disk drive dragging your system down, or a bad card plugged into the motherboard. Easiest thing is to remove devices such as PCI cards and hard drives one at a time to se ... Dell OptiPlex GX620 PC Desktop

My presario sr5510F does not power up. The power

Off the bat it sounds like a bad power supply, even if it is a new one.Even though it's a new power supply, you can buy a dud sometimes.Could be that there are Electrolytic Capacitors on the motherboard, that have dried up inside, a ... HP COMPAQ Presario SR5510F Athlon 64 X2 5000+ 2GB DDR2 500GB NVIDIA GeForce 6150 SE Windows Vi... PC Desktop

Compaq EVO 510 2.4GZ Motherboard Question

Motherboard was tested before shipping? Good. Want you to know I wasn't trying to be a smart aleck with my statement. I was trying to find out if the motherboard was removed from a computer, and the state of the motherboard was not ... Compaq Evo D510 Minitower (Open Box) (OB4700432011) PC Desktop

EMachine no power

Ok for a start the power switch is not green and white that is the power led, you need to look for a red and black wire normally marked on the connector and motherboard as pwrsw or pswitch.\015\012if you believe it to be the switch unplug the c ... E-Machines eMachines Desktop PC

Computer won't boot or shut off

Yep--you put it together incorrectly.I don't know why you took it apart. Don't do that again. Just open the case and blow it out--especially the power supply. There is nothing to be gained by taking all the stuff out of it.I woul ... E-Machines eMachines Desktop PC

Computer Case ULT33180 Powers down about 4 seconds after started

Ive done something similar, I took the CMOS battery off the motherboard and put it back in after about a minute to reset the bios. Unplugged the power supply from the motherboard and flipped the power switch on the back of the power supply (on and o ... PSA E-Torque (ULT33180)

Hp pavilion 764c wire diagrams

Take a picture of the inside of your computer and put it up on the website with the wire connectors that need to be connected. The connecting wires should be in four groups. 1. The power supply connectors. These connectors will supply power to to all ... HP PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.1657 seconds