Having problems with your E-Machines (T2824) PC Desktop ?

Screen says check c signal

\015 What is a pc signal\015

Answers :

These are integrated in u pc to give the display , replace the display cable
Repair Help & Product Troubleshooting for E-Machines (T2824) PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

NO SIGNAL What do I do?

These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

Gateway LCD powers on but has no picture

I have a Gateway FPD1730 LCD monitor. When I plug it into my Gateway 500x desktop the power light turns green and then says "Power Saving Mode" and then it goes black. It will occasionally flash on and have a picture and then go off. When I unplug th ... Sceptre X9G Komodo IV 19" Flat Panel LCD Monitor

My lcd screen does not show images projected by the computer, when the RGB cord is unplugged it says check cable setting and when adjusted and it picks it up it still shows nothing

Good day sir/maam, there are several reasons why your LCD monitor acts like the one you say. but let us start with the common ones.\015\012\015\012check your PC if there is the video signal going out to your mo ... Computer Monitors

Screen says no signal input.

Well,this probably implies a lot of problems. 1.Check the video adapter cable,make sure the pins are not bent or broken. 2. Open the case panel of the left side and disconnect and remove components such as Vga card,rams,hdd,roms,floopy drive,other ag ... Compaq Presario 5000 PC Desktop

Zig-zag screen that freezes, then no signal on reboot

I would try the video card on another system with a different monitor and see if it is working ok then check the monitor and so forth ... HP Pavilion a6600f Desktop PC

Have emachines T6528 graphics problem

If it doesn't boot at all .( this is the reason that you see that message on the screen it means that no video signal came out from the computer ) ..try to change the cable that leads from the pc to the monitor first ...and if the problem its still o ... E-Machines T6528 PC Desktop

Problems connecting my acer laptop with tv

Sound and picture are two seperate things unless you use an HDMI cable so lets just deal with the picture first\015\012\015\012After you do the connection, you need to tell your laptop to present the picture to the TV.\015\012\015\0121- O ... Acer Aspire 5102WLMi Notebook

Screen comes on says Acer then No Signal, and goes out. if shut power off and then back on get same result.

This means the monitor believes it's not connected to the computer. Verify the cables first of all. Then try booting in safe mode (F8 key at PC startup) in order to verify that the PC is sending data to the proper video port (you might have a dual VG ... Acer AL2223W 22" LCD Monitor

After starting the computer the screen is black and only displays digital analog on screen and the blue light is flashing. It then displays a box say "check signal digital analog." please help me. Thanx.

This blue light flashing means there is power to monitor bu NO video\015\012signal. No Analog or digital Video . analog is the regular plug for PC\015\012to Monitor, the other is HDMI digital or other digital. Check signal\015\012digital/analog means ... Samsung Syncmaster 940BW LCD Monitor

My monitor comes on long enough to show the e then says no signal! Please help what could be causing this problem?

Two things to check , to do, to assertain the point of failure .\015\012\015\0121. Disconnect the signal cable coming from the monitor to the computer tower.If the monitor goes out there can be a problem at the monitor.\015\0122. Ch ... Computer Monitors

My 19mvwk is saying no signal going to sleep

Check the data cable is properly fixed. Can you hear the beep sound while booting. Check the ram inside the cpu. ... AOC 19LVWK LCD Monitor

Lost signal on acer aspire 6530 lap top, dont know if my daughter has pressed a wrong button or switch ?

There is a little satellite icon next to the always blue (when turned on) skip to next (song) and stop (square) touch buttons. Put your finger on the satellite icon for a few seconds, then move off, a green message should come up on the bottom of you ... Acer Aspire 6530-5143 Notebook PC

Beeping noise. Hi, my computer say no signal, then after then 5 minutes, it has one long constant beeping noises. The connection is fine. I check to see if the ram was bad, but it wasn't since i bought another one. I check online, it say one beep means no problem. but the beeping won't stop and my screen say no signal?

Good chance you need to reseat the VIDEO card.\015\012http://www.computerhope.com/beep.htm ... Sony VAIO Digital Studio PCV-RX860 PC Desktop

Cannot connect to internet

First check ipaddress \015\012 Click Start -run- type cmd hit enter for XP or Start -search-type cmd hit enter in Vista. On the DOS black screen after the blinking cursor type ipconfig hit enter check the ipaddress if are getting ipaddress other than ... Fujitsu AMILO Pro V1000 Notebook

Wont go to normal start up screen!!!

The screen that you're seeing is the self-test of the monitor, as it's already stated. It's commonly caused by having no signal coming from the computer to the monitor. You were advised to check the monitor cable, if you have already done that, then ... E-Machines eView 17f3 17" Flat CRT Monitor

No color red displays.

If you think that electronic repair is very difficult to learn then you have to read this article where only by using a solder gun could solve a Monitor color problem. Of course there were many tough dog cases (very difficult to find out the fault) i ... ViewSonic G70fmb (Black) 17" CRT Monitor

I have a HP tower and compaq monitor, does this affect the speakers on the monitor? Since I changed the towers out the sound hasn't worked

HP and Compaq are actually now one company. So depending on the age of your tower and the age of the monitor they should be compatible.First you should check the small speaker icon located in the task bar in the lower right hand corner of ... HP Compaq WF1907 Monitor

When it powers up the screen is fine then it goes black with no signal box, then if you turn it off and on again screens comes back for few seconds and then off again, sying no signal. Viewsonic LCD monitor VP720b

The lcd has three parts the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, all three take a bit of power from the inverter. The self t ... ViewSonic VA720 17" LCD Flat Panel Monitor

I have a dell GX280 and I tried to connect it to a Olevia LCD TV but I have a problem to do so. I connect it via VGA cable. When I started the PC I could see TV display Windows logon and show PC is starting up. But then it turned to a blue screen with message 'A problem has been detected and windows has been shut down to prevent damage to your computer.'. and it continued to say that I needed to run a system diagnostic utility to check memory check etc. the technical information was 'Stop: 0x000

Lower you screen resoloution to 800x600 to start with. Also you must setup mutimonitor, correctly.\015\012\015\012\015\012Right, well, IF your TV has a DB15 Female Plug on it then you CAN, connect it ... Dell OptiPlex GX280 PC Desktop

It is plugged into the computer, and it is powered on, but the monitor screen says that there is no signal. I am certain that the monitor is plugged into the computer. I checked it via control panel and it says that the monitor is working properly.

Have you checked if its on the correct source,, analog or digital press the source button it will cycle to both and if its receiving a signal from the computer it should show a picture.\015\012Good luck ... Acer AL1916W 19" LCD Monitor

I have just set up new desktop Acer. Error message: No input signal.

Check the website for drivers. But it seems to me that there is another problem most computer boot up no matter what screen is hook up. have you tried any other monitors ? If you have and the work im not sure what your issue is but i would say that ... Acer Aspire™ T180 PC Desktop

Main screen only has three boxes BGR

The monitor is telling you it's not getting a signal from the computer. The message is displayed to show the monitor is on and can display an image, but the computer is not sending video. Probably the computer is not starting up, or there has been a ... HP Pavilion a305w (DM181AR) PC Desktop

No Signal Input at Login Screen

Try safe mode and check power settings. Disply,screensaver tab, power settings. It really does sound like a wire though. ... Computer Monitors

Monitor says no signal

This could be a multitude of things. Firstly, check the connections from your computer to your monitor, unplug them and plug them back in, make sure the thumb screws that connect your monitor to your computer and nice and tight but dont use a tool to ... Northgate (STAX2517C2) PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7150 seconds