Having problems with your E-Machines T2482 PC Desktop ?

I need the wiring placement for the orginal motherboard for the emachine t2484

Answers :

The E-machinre is totally intregrated. You will need to contact the manufacture and request the instructions to each replacement.
Repair Help & Product Troubleshooting for E-Machines T2482 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need the wiring placement for the orginal motherboard for the emachine t2484

The E-machinre is totally intregrated. You will need to contact the manufacture and request the instructions to each replacement. ... E-Machines T2482 PC Desktop

I have a T2958 and toof the face off. Can you

EMachines doesn't give out this kind of info, and I don't have one in the shop. eMachines also had the habit, of using a few different manufacturer's of motherboards. Intel, TriGem, MSI, Asus,and FIC to name five. Plus eMachines wou ... E-Machines (T2958) PC Desktop

Need to re-attach power button cable, hard drive

The manual for your computer is available from emachines, p.168 shows the info you need (replacing the front I/O panel)\015\012 ... E-Machines eMachines Desktop PC

I would like an internal view of eMachine T4150 to be sure everything is connected correctly

There's a bit of a toughie! eMachines doesn't like to give out this information, lyndapalimas, and I don't have one sitting in my shop.eMachines used four different motherboard manufacturers, to my knowledge. TriGem, Intel, FIC, and MSI. ... PC Desktops

Wires from switch came unplugged (white and black) where do they

Power On switch (Button)? Restart switch? Speakers?Wires came loose from the motherboard?Should like you to see if you can trace the wires back to the front panel, (Where the Power On button is located Granted, this may be a little tough ... E-Machines eMachines Desktop PC

Need wiring diagram for emachines t2200 motherboard

If you are replacing the power supply and it has 4 pin 12v conector and your motherboard doesn't, just disregard the 4 pin plug. The 20 pin conector will supply sufficient power for the processor. Many of the older motherboards did not have a separa ... E-Machines eMachines Desktop PC

Dc jack How do I replace the dc jack input on the Sony PCGK37

The PCG-K37 (Sony VAIO Laptop) uses a DC Jack soldered to a two-wire jacketed (shielding) cable that is routed under the DVD (tray) and towards the back to the Voltage Board located under the Touch Pad (Mouse) via a white polarized plug. The wires ar ... Sony PCGK37 Notebook

Need where pwr sw and pwr led and hdd led plug onto au31 motherboard

FIC AU31 mb (a.k.a K7m-NF18G mb)Pin Configuration = PinoutThe Front plastic panel of the computer is the Front Panel.The area of pins on the motherboard that the cables (Wires) go to, is the Front Panel header.Front Panel head ... E-Machines T3092 PC Desktop

EMachine no power

Ok for a start the power switch is not green and white that is the power led, you need to look for a red and black wire normally marked on the connector and motherboard as pwrsw or pswitch.\015\012if you believe it to be the switch unplug the c ... E-Machines eMachines Desktop PC

Emachine t2742 I also have a wiring problem!

Gtater,It's ironic that you ask me this question today-- i am just now carrying in another eMachine computer to fix. Anyway, unfortunately I do not have one that is the same model as yours (T2742). However, I did some quick research and found t ... E-Machines eMachines Desktop PC

Bad power supply, installed new one, get green light on mother board; but doesn't boot up. Bad start up button?

Yes, it is my belief that it is the Power On button. To test this, there is a simple solution. I however, would like to caution you at this point.You will have the power supply plugged in. There will be a small spark. I wouldn't advise how to t ... PC Desktops

Had to replace power switch on emachine computer need to know where wires go

I'd like you to look at this motherboard, and compare it to yours. It's an Intel Seabreeze T3 motherboard. My data states it was used in many computers, and the eMachines T3830 being one of them. ... E-Machines eMachines T3830 PC Desktop

Emachine t6532 motherboard issue???

Is your new SUP has the same specs with the old SUP? like voltage output, WATTS etc....Usually motherboards have a led light in it that will light up when its connected on SUP.regarding the wire placements for power and led co ... E-Machines eMachines Desktop PC

Power button wiring

A quick google determined your emachines model w2040 is equipped with FIC motherboard AM37. Download the manual from http://www.fic.com.tw/support/motherboard/motherboard.aspx?model_id=107You'll find the pinout info for your wiring on pag ... E-Machines eMachines Desktop PC

I need to know where the hdd led wire attaches and the blue 3 pin jumper.

Try this link from another forum:\015\012http://www.elhvb.com/mboards/oem/emachines/manuals/K7MNF-64_manual.zip ... PC Desktops

Problem with power connections on emachine T2596

Take a peek at this link,http://www.duxcw.com/faq/mb/frontpanel.htmit may assist you in your problem ... eMachines PC Desktops

Emachines t6522 can any one with a emachines t6522 please open up their computer and tell me where the red/white, black/white and gree/white wires go and in what configuration. when looking down at the motherboard it is in the lower right corner.

Assume you are trying to connect the wires from the faceplate to the \012motherboard. Get a magnifying glass and see if the board is marked as to\012 Power, Speaker, HDD LED, Reset, etc. Trace the wires to the faceplate \012and note what the function ... E-Machines eMachines Desktop PC

Motherboard E210882 on Emachines Model W2888 pin configuration

Here is a link to the manual,It is in PDF format ... PC Desktops

Need wiring diagram for eMachine 20030812 motherboard!!!

You should be able to see the words/letters that go with the jumpers on the motherboard itself. look around the jumper settings area for power, pwr etc. and match them up with your jumpers which should have what the go to on them. ... E-Machines eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop

I forgot my bios password. How may I reset it? Is there a standard bios password on an eMachines E520 series?

If you have forgotten your BIOS or system password, there are no software tricks or magical gimmicks that will get the password cleared. Laptops are different in that they are designed to not work with “backdoors” etc. for security reason ... eMachines eMD620-5133 Notebook

Need proper wiring for the J9C2 connector pinout

The User Manual for this m/board (E210882) can be found at :- ftp://download.intel.com/support/motherboards/desktop/d865glc/BFLC_English.pdf you will need adobe free reader to view it. refer to pages 40 thru 46 for the front panel header and i ... Dell Dimension 4600 PC Desktop

My emachines T3828 will not power up. I changed the power supply, but that didn't help. my next suspect was the power switch. I found that the wires wer a little loose. Thinking that the power switch wires were one unit, I pulled them. Imagine my surprise when I saw that they wer actuall three seperate wires, One black and white, One blue and wdhite, and one red and white. I need to know how to reconnect them, and in which order. I also noticed that a green light comes on. I assume this is for t

Hello there,The green light on the motherboard is there to indicate that you are in fact getting power to the board, which is good. The wires you refer to are in fact the power switch, reset switch, and probably some type of ... E-Machines T2742 PC Desktop

EMachines T3092 MoBo Layout

Here is the website for that particular mother board. This should give you what you need.\015\012\015\012h ... E-Machines eMachines Desktop PC

A power diagram for restoring power for a emachine

Hi there if you look real closley at the wires they are labled such as (pwr)led (reset) (hdd led ) (remote switch this the power for the computer) ect ect now look real closley and you will see the same markings on the edge of the board ... E-Machines eMachines Desktop PC

Need wiring diagram for emachines t2200 motherboard

This is most likely the motherboard you are using. If it is, you can find a manual for it here ... E-Machines Athlon XP 2200+ (rb-t2200-c67)
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9064 seconds