Having problems with your E-Machines T1090 PC Desktop ?

I need to disable the onboard video card on the emachine t1090 but I don't have any video output


Answers :

If you are updating the old built-in video card for a newer o better one (PCI, PCI EXPRESS, AGP) just install it run the computer as normal. , install the proper software containing the drivers for the new video card, restart the computer.and make sure in the device manager you new video card is detected and working fine.
\015\012
\015\012you can just disable the old one. inside windows (linux o mac). If you are using windows, just click on start, and on the right column you wikk see CONTROL PANEL tab. click on it, search for device manager, doble click on it.
\015\012Here you will have a list of all the hardware installed in your pc. doble click on dsplay adapters, right click on your old video card and cleft click on the DISABLE option.
\015\012
\015\012In some computers you can access the BIOS settings and disable it from there.
Enter the bios under onboard devices you see the the video adapter disable it there save and exit
Repair Help & Product Troubleshooting for E-Machines T1090 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Onboard video has failed..how do I change in bios to video card ?


First install the video card in the pci slot first so that you have access to your monitors screen for you to disable the on board video chip or video card, go to the CMOS setup by pressing del key. once there you can browse through the CMOS setup t ... Gateway GM5088 PC Desktop

Video card not working, monitor goes off


  \015\012  In the bios there could be setting to disable your onboard video. Since the output was broken, see if there is an option to disable the onboard setting. If you do this and you are still having problems, I would go ahea ... Dell Dimension 3000 PC Desktop

Carlos Hello, i need help, and i hope you can help me, i have a DELL with the FOXCON LS 36, DUAL XEON, byt it has only 16 mb of video, then buy a new video card wiyh 256 mb but when i installed the car its not functiion and the computer dont show anything, but if i desinstallation the card and use only the original video it works good, some bady can help me?


I assume you have switched the monitor cable in the back to your video card before booting up. Also you must disable the onboard video and driver too by Start----->Control Panel----->System----->Hardware----->Device Manager and make sure ... HP Pavilion Media Center TV m7360n (EL409AA) PC Desktop

I have no video output. I tried the monitor on another computer and it works fine. I do not get a boot screen or a anything other than the ACER logo. WIll the onboard video automaticly be disabled if I install a videocard in a pci slot?


If you have installed a PCI-E video card in your computer and you have an onboard video it would be better for you to disable the AGP or the onboard video adapter in the BIOS and just leave the PCI-E card enabled. You may have to uninstall the video ... ASUS Essentio Desktop with Intel Pentium Dual-Core Processor E2200

No video output from my computer.


Are you using an ON-board graphics adapter or a separate VIDEO CARD? Some motherboards lets you set the video output to "DISABLE ONBOARD GRAPHICS" if you have installed a video card (BIOS). You may have plugged the monitor cable to the onboard D-sub ... SAMTRON 94B 19 inch LCD Monitor

Disabled video driver. Now unable to reboot emachines T5246


To reset bios with jumper settings: there is jumper on the board that has to be moved to the other adjoining pins, and then back. Hopefully it is marked. For sure check your owners manual, or google your mobo for the location of the jumper and exact ... E-Machines eMachines Desktop PC

I have 2 acer data managerment problem found in edata security software installation it says please close all running programs and reinstall edats security. the second one is catalyst control center is not supported by the friver versionof your enabled graphics adapter. please update your ati graphics or enable your ati adapter using displays manager


> please close all running programs and reinstall edats security. \015\012\015\012Close programs (word-processor, web-browser).\015\012Click Start\015\012Click Control Panel\015\012Click Classic View\015\012Clic ... Acer PC Desktops

We have an HP Pavilion a1410y desktop computer. We've had some problems in the past with crackling sound on certain games the kids play, but otherwise the computer has worked fine. We went on vacation last week and unplugged our electronics while away. When we returned and plugged things back in, the HP starts up, but shows no picture on the screen. We've tried unplugging everything, letting it rest, replugging and restarting. Nothing. I tried replacing the monitor with one from another compute


Hello, Ron.The problem is with your video adapter (the port on your computer that connect the cable from your HP Pavilion to your monitor.From HP Support:Inspect the video cable and video connectors for \015\012dam ... PC Desktops

Video Card Upgrade Problems


Does this computer have an onboard video card?\015\012\015\012If so you will need to disable this feature in the system BIOS.\015\012It should be under onboard devices.\015\012You will need to use the onboard card to enter the ... E-Machines eMachines Desktop PC

I need to disable the onboard video card on the emachine t1090 but I don't have any video output


If you are updating the old built-in video card for a newer o better one (PCI, PCI EXPRESS, AGP) just install it run the computer as normal. , install the proper software containing the drivers for the new video card, restart the computer.and make s ... E-Machines T1090 PC Desktop

How to disable onboard video on DC7600?


Hello, sometimes if you disable on board VGA on your baord, the vga card will still not work well but i will tell you how to disable ooboard vga on your sytem anyway( got to the bios settings on your computer, select pheripheral setup and disable onb ... HP Compaq dc7600 PC Desktop

Want to upgrade the video card in computer


Fist off yes you may add a video card onto the pc but it may not be as fast as you hoped. if you have nothing but "PCI" slots not "PCI-E" but pci you may want to look into the geforce 8400 gs which offers both AGP and PCI also the brand ATI offers pc ... Acer PC Desktops

I get no video output from the new PCI video card I've installed in my Think Centre


Maybe your old video card is on board because you don't mention it that you remove it. Maybe the problem is the cmos or the bios setup. If you can go to bios setup look for the onboard vga in disable it and look for pci vga option if disable enable i ... IBM ThinkCentre A50p PC Desktop

Bios does not recognise the correct amount of memory inserted!


The most likely Culprit is an integrated (Built into the motherboard) or OEM (Original Equipment from Manufacturer) Video card that is "Borrowing" some of the system memory to provide video Memory.\015\012\015\012This can happen EVEN if y ... PC Desktops

Install a second VGA card on HP D530c


Are you upgrading from the basic video that is built into your computer's motherboard? If you are trying to boost your performance by installing an after-market video card, you may need to disable the built-in video by changing the settings in your c ... HP D530C W2K PRO

Trying to install a video card for my nephew. Nothing fancy. He has an emachines w3650 and has an EVGA geforce9600gt card. The card is pci-e 2.0 512ddr3. When we put the card in his case and start up the screen is just black nothing shows up. Downloaded drivers but when we go to install it just says there is no compatible device. Not sure what to try?


Where do you plug the monitor ? To the onboard video card or the new card? Go to the BIOS and disable the onboard Video card, and plug the cable to the new card only, then install the drivers.\015\012Good luck ... E-Machines eMachines Desktop PC

No audio device


First thing to do is verify that your sound adapter is enabled in the device manager then update the drivers.If this is a vista issue, you'll need to inform your programs which sound device you're intending to use... for some programs, no ... Compaq PC Desktops

After trouble with getting video,It now shuts down


Does your BIOS?, or motherboard jumper? have the ability to DISABLE the Onboard Video? If it does, then you must do that, first. Also try pressing F8 at boot time and select VGA Boot. OR simply boot up in Safe Mode, When booted, either way, Remove th ... PC Desktops

PCIE slot un able to detect Video Card


I have the same PC and the same problem. I have come to the conclusion that the PCIe sot is dead after about one year of use. What the heck, do they put time bombs in these stupid things? I have tried resetting CMOS, reloading the Nvidia drivers, oth ... Gateway GT5228 PC Desktop

I have an emachines etower 433i with onboard video. I've installed a separate pci video card, but I don't know how to change the jumper settings on the motherboard to disable the video chip. On the motherboard it says jumper j1 1-2 disables the chip, but where are the jumpers and how do you change them??


Go into >my computer>properties>device manager>graphics.You should be able to disable your on-board graphics there. Be sure your computer boots from the new card before you do this. ... PC Desktops

PCI video card not working in XP, T1090 emachine


Have you disabled the on-board video, if not you will have a conflict between the 2 ... E-Machines T1090 PC Desktop

Extended Desktop on Dell Dimensions 4600


Yes your right..leave it set to AUTO BUT ONLY USE THE ATI CHIP SET VIDEO CARDS.\015\012\015\012\015\012Dell Dimension 4600\015\012We saw great image quality from the 17-inch E171FP analog LCD monitor that accompanied our review syst ... Dell Dimension 4600 PC Desktop

No video signal to Monitor.


Lack of video signal is usually 1 of 3 things, Power supply (PSU), Video card or Motherboard (mobo).Situation #1: If you get a blank screen and no sounds or movement it either indicates that the power supply unit (PSU) has failed or something o ... E-Machines eMachines Desktop PC

I recently moved my computer into my new condo and have not been able to use it since. The problem seems to be with the monitor. I turn on the computer and the fan comes on but the monitor displays "no signal" and then goes dark but the light one the front still flashes indicating it is getting power. The last time I moved my computer from one room to another, the monitor suddenly couldn't/wouldn't display colors accruately - no red. Attempt to adjust the color by using the monitor's controls we


Lack of video signal is usually 1 of 3 things, Power supply (PSU), Video card or Motherboard (mobo).Situation #1: If you get a blank screen and no sounds or movement it either indicates that the power supply unit (PSU) has failed or somet ... E-Machines eMachines Desktop PC

My pc beeped twice and nothing came


Lack of video signal is usually 1 of 3 things, Power supply (PSU), Video card or Motherboard (mobo).Situation #1: If you get a blank screen and no sounds or movement it either indicates that the power supply unit (PSU) has failed or somet ... Dell Dimension 2400 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6669 seconds