Having problems with your E-Machines T1090 PC Desktop ?

PCI video card not working in XP, T1090 emachine

\015 Looking at a T1090, it was a freebie hand me down to a friend and I'm trying to speed it up. I added some ram, a second HD and after reading some blogs had heard the integrated video slows down the machine. I put a old trident card in. It boots, splash screen comes up, then blanks out when the desktop should appear. Sounds like a XP driver is needed. Shows up in Device mangager. I move the monitor cable back to the on board video connector to pick up where the trident leaves off. I have read I need to disable onboard video, but don't see that option in the BIOS. I ran WinUpdate, and tried the upgrade driver option in DevMan, Xp seems to like the current driver, but it just doesn't work.\015

Answers :

Have you disabled the on-board video, if not you will have a conflict between the 2
Repair Help & Product Troubleshooting for E-Machines T1090 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

PCI video card not working in XP, T1090 emachine


Have you disabled the on-board video, if not you will have a conflict between the 2 ... E-Machines T1090 PC Desktop

I need to disable the onboard video card on the emachine t1090 but I don't have any video output


If you are updating the old built-in video card for a newer o better one (PCI, PCI EXPRESS, AGP) just install it run the computer as normal. , install the proper software containing the drivers for the new video card, restart the computer.and make s ... E-Machines T1090 PC Desktop

EMachine stopped displaying video (card not working, just mobo)


Hi there\015\012\015\012I would say it's the graphics card that's failed. You might get the same beeps for faulty card as removed card....\015\012\015\012Take it to a shop where they can test a compatible card, before they se ... E-Machines eMachines Desktop PC

Emachines w3609 My emachine w3609 was working fine one night and when I turned it on the next morning, it would turn on but my monitor said no signal and it wouldn't do anything. I got online with tech support and they said to reseat the ram, which I did, still no go. Then they said I would have to buy new memory which I did, a kit of 2 x 1 GB of ram. I put it in and still nothing for a total of 12 times. Then they told me my motherboard ram slots were dead, and I would have to get a new motherb


Hey iluvyakatu\015\012\015\012 Does your emachine has inbuild video card or AGP or PCI card? if one it has AGP or PCI card try to reseat it. If it is inbuild try to use AGP card or PCI card and see what happen. Also try to check whether ... E-Machines eMachines Desktop PC

Looking to upgrade my Emachine W3118 Graphics Card Need Help!


Yes if you have a PCI slot your can purchase many video cards with TV-out and S-video out. Do not PCI confused with PCI-E though. Thank you ... E-Machines eMachines Desktop PC

Monitor doesn't work


Sounds like a bad video adapter. I'm assuming your emachines has an integrated video adapter. Put in a video card (with the power plug pulled out! Touch the bare metal frame of the computer with your hand before inserting the video card into the agp ... E-Machines eMachines Desktop PC

EMachine T6522 monitor says "no signal input" when turned on. tower switch light on and motor seems to be running. Nothing but above message on monitor. Checked both ends of cable and unplugged tower and plugged back in.


This could be an issue of a video card gone bad. I have experienced the same issue firsthand. This could also mean that no RAM is installed. If you have been using this computer previously, the second option is probably not even an option.\0 ... eMachines PC Desktops

Emachines d3315 video failed - no signal to monitor.


Hello,Is the system work using the old video card? if yes then, use it and then reconfigure the in the bios setup using the PCI video card. You can insert it simultaneously and then use first the old video in preparation for the configura ... eMachines T6524 PC Desktop

Drivers Emach T5230


I solved this problem completely later that day.\015\012Here's how:\015\012\015\012From the Emachines site I downloaded and installed the file:\015\012RealTek_Audio_5_10_0_5152. \015\012\015\012This dirver is for v ... Microsoft FREE Sidewinder Gamepad Pro-Retail (MSC1800018PRO)

Im trying to install a new video card on an emachine and i keep getting a no signal input on the monitor. thats what i started with.


Is the new video card compatible with your motherboard?If it is , can you try connecting your monitor VGA Cable from your video card properly?And also if you are using a PCI Video Card you should try to install it to another slot if there ... E-Machines T6528 PC Desktop

Installing radeon s9259 graphics card on a emachine t5010


Did you try to after you install the card to go into the control panel and install new hardware in the add new hardware. If I understand you, when you plug the monitor into the new video card it does not turn the monitor on, Even after you install th ... E-Machines eMachines Desktop PC

Adding anothe rmonitor


You probably are not going to do it with the E-Machine at all.E-machines like Dell and a few others are specially designed integrated units which will do the job they are designed to do but have little or no 'upgradability'Spending money ... E-Machines eMachines Desktop PC

I have an about 2 year old M9047C HP PC. The


Really there is no way to check a video card for problems unless 1.) You have another PC that will support the same connections (PCI-E, PCI, AGP, etc) as the video card you have. 2.) The display still works to where you can run some software that wil ... HP Computer Monitors

Emachine - T6420 - Monitor on stand by, no picture, fan running non stop, hard drive power on, screen blank, monitor in yellow not green the programs would end after 10 seconds---if you opened programs/application one coud see them for 10 seconds then all applications would shut down--2 days later--- now--i am left with just a blank screen, fan and hard drive powering up, main fan that usually turns after after 10 seconds- stay on permanete, monitor= yellow buttin, blank. Is this the video card


All the E-machine computers I've worked on had the video as part of the motherboard. You might try borrowing a pci video card from someone and intalling it just to test. My solution is to buy a new computer if it won't work anymore, Walmart sells t ... E-Machines T6420 PC Desktop

No connection from cpu to screen.


By working fine, I assume you mean the monitor goes into its test/diagnostic displays. If that is the case, most likely your roommate has hit upon more or less the correct deduction. Two possibilites should be attempted before assuming to much ... Compaq Presario 7594 PC Desktop

-computer has gone blank


This could be anything from the monitor to bad ram or other items...i.e. software. I can't tell you what to replace but I can tell you what to check....in probable logical sequence. First, check your connections....meaning unplug and plug in again. ... Rosewill R900J 19" Flat Panel LCD Monitor

Blurry and wavy monitor


For mine, it was the on-board video card. I installed an old PCI video card i had laying around, and it works fine now. Am considering an upgrade to PCI-Express, but most likely would then have to upgrade the power supply. ... E-Machines eMachines Desktop PC

Emachine T6528 problem: My monitor wont boot up went i start the computer!


Easiest solution is to connect your monitor to another PC, if still nothing, then your monitor is toast.If you are getting no display at all, and you tried a PCI video card and the onboard, most likely it is your monitor.This ... E-Machines T6528 PC Desktop

Emachines notebook m5310 corrupted bios recovery


Solution 1: Boot-block BIOSModern motherboards have a boot-block BIOS. This is small area of the BIOS that doesn't get overwritten when you flash a BIOS. The boot-block BIOS only has support for the floppy drive. If you have a ... PC Laptops

T2682 emachine running fine video lite went yellow & HD also


The first thing you should do is remove the video card and try to boot\015\012the PC using the onboard video (video on the Motherboard) and see if\015\012that solves the problem. If it does, try putting the video card back\015\012in in a DIFFERENT P ... E-Machines T2682 PC Desktop

Computer wont turn on with video card


Hi, the problem may lie in the temperatures of the card and power supply. If the system exceeds a certain temperature the system will shut down, this is easily achievable if you are over clocking your cards or CPU. You might find that installing extr ... Gateway DX4200-UB001A Desktop Computer

Emachine T2385 Won't Boot in Normal Mode past Windows XP Screen


The first thing I would check is your video card (usually driver) problem. Start windows in safemode with networking. If this problem has occured after updating the video card driver you may try rolling back the driver to a previous version, otherw ... E-Machines Celeron 2.3GHz (rb-t2385)

E-machine t6212 won't boot. I actually have two e-machines that are not sending a signal to the monitor. One is a t6212. It is booting up because I can shut it down using the windows key + up arrow + enter + right arrow + enter. I suspect the video card. I have an older PCI video card that is incompatible with xp. If I put that in the PCI slot will the bios send the video there? The other is a W3107. The hard drives spin, but the green light on the front stops flickering after a few sec


If you get only one BEEP at boot then the computer is working..\015\012\015\012Do you have a 2nd monitor to test with?\015\012\015\012if it BEEPS more then once...\015\012 pull out your mem chips and test,,\015\012 ... E-Machines T6212 PC Desktop

VGA doesn't work on my EMachines W2040


THIS TYPE OF PROBLEM IS CREATED SOME TIME DUE TO BIOS CONFIGURATION. GO TO YOUR BIOS CONFIGURATION ENABLE PLAY & PLUG DEVICES. ENABLE YOUR VGA TO INCREASE 64 BYTE.\015\012\015\012OR REMOVE BIOS BATTERY CLEAN IT AND INSERT LIKE SAME. OR SET YOUR JUMPE ... E-Machines eMachines Desktop PC

I have the emachine t1100, huge desktop monitor worked fine until I installed a new video card,, the ATI Radeo 7500 64MB PCI. Computer does not boot up but fan goes on. I also disconnectd the card to go back to original configuration, and now I still don't have a monitor or boot-up. I recently installed 2 new SDRAm 256 cards, sound card & dvd drive all at the same time. I can't intall any of the drivers due t6o not being able to see the monitor or access the operating system. It would be gre


Try taking out all the newly installed components and see if this restores operation to your computer and monitor. You may have overloaded your system and either the power supply failed you or the motherboard.You might not have damaged anything yet, ... E-Machines eMachines Desktop PC
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7780 seconds