Having problems with your E-Machines M5312 Notebook ?

Need HD Caddy for Emachine M5312. Not System board, Not HD but on

\015 I posted this before but the solution pointed to an ebay site offering a system board. The system board DOES NOT come with the caddy but only a slot to insert the caddy and HD in. Any ideas or polaces to order a caddy from would be helpful.\015

Answers :

Jay4323,
I know your post is old, but if you are still looking. I have a hard drive caddy for a emachine 5312. Contact me for a cheap resolution.

Hi again
I have found a US site for you, if its an empty caddie you need they at the bottom of the page:

http://www.thefind.com/computers/info-hdd-caddy

Good luck and thanks for using Fixya!!!
Repair Help & Product Troubleshooting for E-Machines M5312 Notebook

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Need HD Caddy for Emachine M5312. Not System board, Not HD but on


Jay4323,I know your post is old, but if you are still looking. I have a hard drive caddy for a emachine 5312. Contact me for a cheap resolution. ... E-Machines M5312 Notebook

Emachines I turned off my computer one evening & the next day it wouldn't come back on .The monitor kept saying on signal.I repeatedly turned it on & off & eventually it came back on.This happened 3 weeks ago & each time it is shut down it takes longer & longer to come on. The last time it took 3 days.I notified emachines of this problem & they said to reseat the memory which I did & this was not the problem.Do you have any solutions before I take it to the repair shop?


Are you hearing the fan running or seeing any lights on the system box or keyboard?\015\012\015\012If it is not showing any signs of life, the main power supply has failed; these are built as poorly as anything in your PC and one of the most fr ... E-Machines eMachines Monitor E15T4

Emachines W2888 will Not Start up


Most likely the system board has failed. If the power supply had blown it is not unusual for the subsequent spike to blow the system board. On the other hand it may have been the system board that failed and the PSU is ok. Emachine system boards are ... E-Machines eMachines Desktop PC

Emachines t2899 will come on and fans run but screen is still blank


Actually, the monitor is fine. The problem is that the computer isn't booting. The power comes on and the fans spin, but the system board isn't starting. Try reseating the memory modules in their sockets and clearing the CMOS memory using the jumper ... E-Machines T2899 PC Desktop

HD Caddy for emachine m5312


The board and caddy are below:\015\012\015\012 ... E-Machines M5312 Notebook

T2682 emachine running fine video lite went yellow & HD also


The first thing you should do is remove the video card and try to boot\015\012the PC using the onboard video (video on the Motherboard) and see if\015\012that solves the problem. If it does, try putting the video card back\015\012in in a DIFFERENT P ... E-Machines T2682 PC Desktop

Emachines t3958, bad ram, green stand-by only no boot


Are you saying you bought 2 more machines to fix the problem? I don't understand. Do you have the manual for the machine. How long did your system run before a Ram stick went bad? What brand and size are your Ram sticks. Are they identicle? As far as ... E-Machines eMachines Desktop PC

RESTORE DISC I have an Emachines Desktop. I am trying to do restore cd. Monitor does not seem to have a problem as it is running a test screen but nothing is coming up when I insert CD.


The 'test screen' of the monitor means only that the monitor would display if it receives an input signal.\015\012Make sure it isn't something simple like dislodged video connector on the back of your system box.\015\012You may even want ... E-Machines eMachines Desktop PC

EMachines T6528 desktop will not boot up


The power supply fan runs from either 5V or 12 so that only tells you that the voltage for fan operation is present.\015\012\015\012If you don't have a multimeter already, I would highly advise that you buy one.\015\012They are available for &l ... E-Machines eMachines Desktop PC

Emachine solution thanks for taking the time to help me where is the memory stick located and what typeof motherboard do i buy do i use me serial number or model number to purchase the item you refered to ithink i can replace it as long as i know what I need and what price range do these items run should i just invest in a new desk top


I don't see the previous post. Why do you need to replace your memory and mother board? How old is the emachine? Some of the P1 and PII systems had mother boards riveted in. If it is older than a P4 it would be best to replace the computer. ... E-Machines eMachines Desktop PC

Unable to reset passwords after repair


If the PC is asking for a password before it even boots to Windows, that is because the system board itself has had one set up. If the tech who repaired your computer installed a used system board, it needs the password cleared. This is normally done ... Acer PC Desktops

THE SCREEN SMEARS NAD SHUTS DOWN


Hi eakesj:A number of things here should be checked.First shut down and remove all cards, and power connections to all the drives such as cdroms, hard drives. The power supply should also be looked at and tested for correct voltage ... eMachines T6534 PC Desktop

Specifically where is the hard drive for the toughbook cf- 27 - i've looked all over


Flip the laptop over and slide the 2 tabs that are near the carry handle to the unlocked position. This will allow the metal cover on the underside of the laptop to hinge up and be removed.With the laptop upside down and the carry handle ... Panasonic Toughbook CF-27 Notebook

Poweredge1300 no post


Good news, you can save the machine, although it may take a while. There are a few ways to do this. If you are lucky enough that the boot sector of your BIOS didn't get corrupt and your computer still posts and you can put in a floppy. Then all you ... Dell PowerEdge 1300 Server

EMACHINES T1740 Intel Celeron 1.7 GHz


The following shows specs for your system to get http://www.emachines.com/support/product_support.html?cat=Desktops&subcat=T Series& ... E-Machines eMachines Desktop PC

Adding ram to an e-machine model w 3502


According to the eMachines site, this model comes with 512MB of RAM, expandable to 2GB. It came with 400MHz PC3200 DDR RAM installed, so you can get that type and know it will work. RAM is available from many suppliers. I use Newegg (www.newegg.com) ... PC Desktops

Emachine W3107, DSL won't connect


Hate to tell you this but . . . Turning off your computer isn't much help if you have a stike on phone or power lines not too distant from home.\015\012Even many supposed surge suppressors aren't worth much for protecting electronics.\015 ... E-Machines eMachines Desktop PC

EMACHINE T6542 WHEN I POWER UP, THE FAN STARTS BUT THE "E" BLUE POWER LIGHT DOES NOT LIGHT UP, THE FAN KEEPS RUNNING BUT THE SYSTEM DOES NOT BOOT, MUST CUT POWER SUPPLY AND TRY 2 OR 3 TIMES TO GET "E'LIGHT AND BOOT UP. ALSO, WHEN SYSTEM LEFT ON A GOES TO SLEEP MODE, OFTEN DOES NOT RECOVER, NO "E" LIGHT BUT FAN RUNS


Thanks raider, believe you and chris may be right. I was told that the power supply was the likely problem, but swapping out the old power supply did not fix it, so I changed the motherboard as well. Have to be careful when getting a mother board as ... E-Machines eMachines Desktop PC

Need large disc support for old emachine, flash bios? or try restore cds?


Hi,\015\012flashing a bios, can render your machine/motherboard useless.\015\012You should always ensure any bios download is from a trusted source. if you experience a power failure, or an incomplete bios file. your computers as good as ... E-Machines eMachines Desktop PC

EMachine Model T3828 No power


Greetings! As the first answer suggests, you must be comfortable taking things apart. I've actually just finished diagnosing the same problem on a customer's computer, and Here's what I did.First, I remove the power plug, open up the co ... E-Machines eMachines T3830 PC Desktop

COMPAQ SPS-BD 1394 Motherboard - replacing microprocessor and memory


I normally ask for more information when people post problems but I can't even be bothered to go through all this driver to get to the root of your problem. Cut out the c**p and give the necessary.\015\012\015\012As a former tech, you should know wha ... Compaq Presario 5000 PC Desktop

Won't power up


This error can be caused by one or more of the below possibilities.\015\012Floppy or CD that is not bootable is cur... BIOS or CMOS setup is not setup properly... Hard disk drive does not have bootable f... The hard disk drive ... IBM ThinkPad T20 Notebook

Hi pc wont start


This error can be caused by one or more of the below possibilities.\015\012Floppy or CD that is not bootable is cur... BIOS or CMOS setup is not setup properly... Hard disk drive does not have bootable f... The hard disk drive ... HP Compaq Presario V2000 Notebook

The power light is on, but the monitor is off


This error can be caused by one or more of the below possibilities.\015\012\015\012Floppy or CD that is not bootable is cur... BIOS or CMOS setup is not setup properly... Hard disk drive does not have bootable f... The h ... HP Compaq Business nx7010 Notebook

Emachine motherboard no model number


Check out this site provided for a program called SIW. Download the free english version and install. It will tell you everything about your computer that you ever needed to know. Check the motherboard section for your specifics, and try the sound ... E-Machines eMachines Desktop PC
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9258 seconds