Having problems with your E-Machines etower 600is PC Desktop ?

I need emachine etower 600is intel processor - E-Machines etower 600is PC Desktop


Answers :

The eMachines eTower 600is uses an Intel Celeron III processor that operates at a maximum frequency rate of 600MegaHertz. (600MHz)

http://www.emachines.com/support/product_support.html?cat=Desktops&subcat=eTower%20Series&model=eTower_600is

The Intel Celeron 600 uses a Socket 370 processor socket.

http://en.wikipedia.org/wiki/List_of_Intel_Celeron_microprocessors#.22Coppermine-128.22_.28180_nm.29

There is a locking arm on the side of the Socket 370 processor socket, that is unlocked by easing the arm over to one side to clear a lock tab, then the arm is lifted up to remove the processor.

Example of a Socket 370 processor socket,

http://en.wikipedia.org/wiki/Socket_370

The eMachines eTower 600is uses an Intel 810 chipset, for the motherboard chipset.
[Chip and Chipset are slang terms used for Integrated Circuit, or IC]

The Intel 810 chipset, supports processors with a 66MegaHertz Front Side Bus. (66MHz FSB), or 100MHz FSB.

In an additional link, I will give a recommendation of where to buy an Intel Celeron 600, that uses a 66MHz FSB.
I'm not advertising for this place, it's just a place I have used, and have had good results.

Also information on the Intel 810 chipset.

You could also use an Intel Celeron 700MHz processor, but better still you could use an Intel Pentium III 933MHz processor.

Pentium's typically have Two times, the L2 cache that a comparable Celeron has.The more L2 cache a processor has, the faster it's going to process information.

I also know it will work because out in my shop I have an eMachines T1090, that has an Intel 810 chipset, uses a Socket 370 processor socket, and has an Intel Pentium III 933MHz processor in it.
(Made in 2001, and still works good to this day)

The Intel Pentium III 933MHz processor uses a 100MHz FSB.
The Intel 810 chipset supports processors that have either a 66MHz FSB, or a 100MHz FSB.

If you are not familiar with computer hardware technology, then I have just thrown a whole lot of information at you that is unfamiliar.

Should you like me to break down the information, I would be glad to. Just state so in a Comment.
Repair Help & Product Troubleshooting for E-Machines etower 600is PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need emachine etower 600is intel processor - E-Machines etower 600is PC Desktop


The eMachines eTower 600is uses an Intel Celeron III processor that operates at a maximum frequency rate of 600MegaHertz. (600MHz) ... E-Machines etower 600is PC Desktop

Cpu upgrade , please help


Tech-gu818, When looking to see what processors a computer will support, try to find out what motherboard chipset is on the motherboard, and the processor socket.The motherboard chipset is the;1) Northbridge chip2) ... E-Machines eMachines Desktop PC

I'm trying to find what the cpu socket is so i can upgrade it


According to eMachines Support, the eTower 466id Desktop Computer uses an Intel Celeron 466MHz CPU.(Central Processing Unit. Also known as Microprocessor, and short term - Processor)Information for the Intel Celeron 466MHz CPU ... eMachines etower 466id PC Desktop

Emachine compatable with e-mu 1820? - E-Machines eMachines Desktop PC


If you have a PC that is less than 2 Years old, it should work with the e-mu 1820. \015\012Here are the specs needed:\015\012\015\012Minimum System Requirements: \015\012Genuine Intel Pentium III or AMD K6 cla ... E-Machines eMachines Desktop PC

My e-Machine W3115 automatically shuts down multiple times


1) Computer off, and unplugged from power. (Unplug from the surge protector FIRST, then unplug the power cable out of the power supply)2) Work on a table where you have plenty of room.Open the computer case. (Rear of computer, ... eMachines W3115 PC Desktop

Upgrading IBM ThinkPad T20 Intel Pentium III to Intel Pentium 4


Patrick, I'm glad to see your enthusiasm to explore and expand on your computer knowledge. Unfortunately I have to be the first to let you know that in this case your ideas on upgrading your systems by simply changing the processors just won't work. ... Intel (RK80532PG0881M) Pentium 4, 3 GHz Processor

My Samsung LCD TV/Computer Monitor just went deadOnly 14pins/15


It sounds to me like the monitor/TV needs to either be replaced or sent in for repair but there are a few things we can test. \015\012\015\012The first thing would be to set the TV to connect a cable line to the TV and see if you can get ... Samsung SyncMaster 204B 20.1" LCD Monitor

EMachine W3623 Vista not accepting router


Agreed with the above Vista does **** and there are routers and other equipment thats not compatible with Vista, if this is the case then You must download updated drivers from the Netgear Site, they update drivers on occasion but not so much since W ... E-Machines eMachines Desktop PC

My emachine also won't turn on...


Try going to asus.com they have all kinds of motherboards that are fully tricked out, and comparably priced. they are also universal with both intel and AMD Processors. ... E-Machines eMachines Desktop PC

I want to upgrade an Intel Pentium 4 631 3.o Ghz Processor to a P-4 661 3.4 on an Emachines t5084. I have seen a dozen types of P-4 661's how do i know which is correct for my Motherboard ? Most Processors advertised do not give spec's. I do not have a Motherboard Manual either. A manual would help also. Thanks, Will


You can use the intel processor compatibility tool here. You first need to take note of the motherboard's exact model number to find an exact match. The model num ... E-Machines T5082 PC Desktop

My 2gb ram stick died, so I tried upgrade to 4gb


Most appreciated naturalgal66. Perhaps you would like more information, to put together some of the information I stated in the Clarifications.This is a motherboard block diagram,http://en.wikipedia.org/wiki/File:Motherb ... HP Pavilion a6600f Desktop PC

Upgrading CPU on a Emachines E4231


Im using emachine E4231 upgrade from vista basic to windows 7 prof I upgraded hard drive to 1T and added 2 2 gig memory sticks and it works like a dream faster more responsive. Its bisy trying to upgrade the cpu for gaming but need to find what I can ... E-Machines eMachines Desktop PC

Are they compatible?


Hi, your cpu currently in the machine should be a 754chipset, only way you would be able to put a core duo processor in the machine would be to replace the motherboard, cpu, and probably the memory.. to DDR2\015\012\015\012Have a good new ... Intel Core 2 Duo E6600, 2.4 GHz E6600 (BX805576600) Processor

I have a T2958 and toof the face off. Can you


EMachines doesn't give out this kind of info, and I don't have one in the shop. eMachines also had the habit, of using a few different manufacturer's of motherboards. Intel, TriGem, MSI, Asus,and FIC to name five. Plus eMachines wou ... E-Machines (T2958) PC Desktop

I have a compaq laptop its dead, i want the mother board diagram


Motherboard diagram? Is this to trace where the power comes in to the motherboard?The Compaq Presario M2000 Series Notebook PC's, use a separate Power Board. A small, rectangular circuit board, that plugs into the mainboard. (Motherboard) ... Compaq Presario M2000 Notebook

I need step by step on how to upgrade cpu on my presario 7594 desktop ,windows 98SE,it came with 566mhz processor,I was told Ican go up tp 1.0 ghz, after I power up ,what is all I step i needed to do


I'm not sure I go along with the advice you were given. Going to get a little detailed here, but the following info is necessary IMHO. If you have any questions regarding the info, please state so in a Comment.Supporting ... Compaq Presario 7594 PC Desktop

I am going to buy a HP desktop. I want to install a Q9650 and 8gb of mem. and 750gb to 1tb HD. 8600Gt - 512 mb graphics. I will want to use it for television viewing and surfing, as it will be connected to my big screen television. I want the PC easily upgradable. What do I look for in the motherboard specifications?


What do you need to look for in the motherboard specifications? I suggest you start by going to HP.com/Support,http://welcome.hp.com/country/us/en/support.htmlIn the box to the right of -> product search: <- ... HP PC Desktops

Video chip location on computer board - Dell Dimension 5150 (DIM515MIN) PC Desktop


If this is a direct reference to the Dell Dimension 5150 Desktop computer, it is an Intel GMA950 integrated graphics chip, soldered to the motherboard.You will see Intel at the top of the chip, and GMA950 under Intel.This is D ... Dell Dimension 5150 (DIM515MIN) PC Desktop

PC SHUT down


Three things i find to cause this,one, the power supply is bad,two, the power connector is lose or not push in three, the heat sink on the processor has come off. This will cause the cpu to over heat and self shut off. ... Dell E151FPp 15" Flat Panel LCD Monitor

Desperatley Seeking Sound


Hey Hi,Firstly You Need To Completely Uninstall The Audio Driver Software Using The Following Uninstaller Software. Click On The Link Below And Download And Install The Uninstaller Software. ... PC Desktops

E-machine t3882 desktop. When I power on computer, it will power up, but has a loud fan noise and will not boot up. I opened unit up with power on and the fan making the noise was on top of what appeared to be plates spaced apart. Do iI need to replace fan and how do I do it? Mike


Hi\015\012\015\012The fan you are talking about is the processor's fan, beneath this fan is the heat sink and beneath the heat sink is the processor. When processor's temp. is high then computer will not switch on however as your fan is working ... PC Desktops

Desktop E Machine will not power on.


It is very common that the power supplies in those fail, which is most likly your problem. However, you can do a few things first to test other things. And don't worry, your pictures are most likely still safe on your hard drive, i would not link the ... HP Pavilion a420n PC Desktop

NEED ASSISTANCE w/ DELL PC


When you first turn on the system, listen closely for any beeps. If you hear any try to remember or write down the pattern of beeps. Then go to Dell's site and find the manual for your model and look up the BIOS or CMOS error codes. This will indi ... PC Desktops

Need manual for Eone 433 desktop computer


I had the same problem recently with an emachines Eone 433 desktop. Taking it apart is certainly difficult. First of all, the metal compartment that holds the motherboard and drives is beneath the CRT monitor. In order to access and remove the compar ... E-Machines eOne 433 PC Desktop

When I turn it on, only the fans run. I cannot hear the hard drive run and the hard drive light on the bezel is solid yellow


EMachines were designed to be Budget computers. As such the company used cheap Power Supply's. Cheap components within the power supply have failed. The power supply only has enough power to light, lights, and spin fans.Solution is to rep ... E-Machines T6216 (827103077834) PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0034 seconds