Having problems with your E-Machines eMonster 600 PC Desktop ?

I have an eMachine T3410. When it boots, a screen

\015 I have an eMachines T3410. When it boots, a screen appears giving me the option to start Windows XP or to start XP setup (the XP setup option is highlighted). If I do not choose Windows XP, the setup option executes and I get the error message "\\minit\\system32\\biosinfo.inf could not be loaded error code 14". If I choose Windows XP, the PC starts normally. Any ideas as to 1)correcting the error and/or 2)not having the screen appear and starting Windows normally?\015

Answers :

Well what i would try is typing  "\\minit\\system32\\biosinfo.inf download\015\012in google when you find the download go to system32 and replace the inf with the new one you just downloaded. that should fix the error
Your missing the biosinfo.inf. try reinstalling the system but backup everything you need first.
Repair Help & Product Troubleshooting for E-Machines eMonster 600 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My pc was doing this but now it's doing something different but simular

Try this: boot into the bios, set the boot order to cd rom first,hard drive 2nd and either one to 3rd. Hit F10 to save changes & exit. Put in your Windows cd. It should come up to a screen that says "Hit any key to boot to cd", do that. Set up sh ... E-Machines eMachines T3830 PC Desktop

Hanging on boot screen

Try booting from a Flash ... E-Machines eMachines Desktop PC

Can't restore my computer

Here's your GEEK-steer …\015\012\015\012Is the DVD you mention the manufacturer/reseller's recovery disk? You'll readily know because its user interface screens will display NON-microsoft business name such as eMachine's, etc. Or ... E-Machines M5305 Notebook

EMachine T1840 Will Not Boot

Well sounds like you are in quite a pickle. If the restore is not functioning properly you have one of a few options. Continue with the restore without backing up, take it to a computer specialist and have them back up your information and redo the ... E-Machines -T1840-CELERON-1.8GHz,40GB Desktop Computer System (1000000127)

Windows xp logo will start to load then......

To solve this will require more information from you. The Blue screen is Windows way of telling you that it has a driver issue with a basic component, usually your video card. Did you recently make any hardware changes? If so please let me know wh ... Compaq Presario S6000NX (DQ178A#ABA) PC Desktop

Emachines W3052 Gets stuck on logo screen when starting up.

My computer does a similar thing, the issue with mine is the mother board which requires everything to be at a certain temperature. Let it run on the start screen for a couple minutes and hit the reset button. If it doesn't boot up you're going to ha ... E-Machines W3052 PC Desktop

Toshiba Satellite 1400

To Access the Bios Setup Utility Here Is A List Of Key Commands And The Make/Model They Are For..\015\012\015\012Acer - Aspire, Power, Veriton, Extensa, Ferrari, TravelMate, Altos\015\012\015\012 ... Toshiba Satellite A35-S159 Notebook

Hi, I have a emachine desktop W3507 purchased two years ago, no longer have warrenty for it and it is stuck on the emachine screen. You cannot do anything to it. I have tried the f11 and f8 keying while starting up but does not work. What iniatially happened was my daughter was experiencing a stuck screen after startup but before desktop and I did the f11 according to the manual and did the good last configuration thing and it worked fine. Now after a week it is stuck on this emachine screen. I

When your computer first goes on tap the delete key (or f2 or f10 these are the most common) a several times and this will get you into the bios/cmos setup area. From there we can change the order of the boot devices such as cd-rom, hdd, floppy etc.; ... E-Machines eMachines Desktop PC

EMachine T3406 wont boot

Is there a post beep when the pc is switched on. check the memory if it is a beep beep beep sound , also disconect the hard drive, dvd drive, floppy, and any usb devices and see if it boots up. if that fails it does seem like the mother board, also c ... E-Machines eMachines Desktop PC

Unmountable boot volume

Hopefully you have a windows installation cd or a recovery cd. If you do then you need to install it into your cd rom drive. Reboot the computer and you will see a message that says to press any key to boot from CD. If you do not get this message and ... eMachines EL1600-01

Was installing google earth in my lap top and it powered off in the middle of it now will not boot back up

Restart, tap F8 when you see the Emachine splasj screen. When the multi-choice menu comes up, scroll down and choose the "Last Known Good Configuration" Windows should reload to that setting. If it does not then, try the windows startup fix below. Yo ... E-Machines eMachines Desktop PC

Emachine T4060 -black screen-no cd-rom boot

Hi,\012\012If it is DVD Drive, then sometimes in BIOS you'll also find the option for DVD Drive together with CD Drive. Choose the correct one and boot your PC.\012\012Please come back and vote for me, if this turns to be helpful for you. ... E-Machines T4060 PC Desktop

Blue Screen it wont let me get past the blue screen..no start menu or anything..after the blue it goes back to the gray screen with a big e on it ..and at the bottome it says f2 for setup or f10 for boot sequence..or something like that ..

When the computer first boots up, press the F8 key when the eMachines logo is replaced by the first Microsoft screen, then select Safe Mode from the list. If the computer will not boot in Safe Mode, you will need to boot from your Windows CD and sel ... E-Machines eMachines Desktop PC

My computer keeps rebooting itself.

I would try taking to motherboard battery out for 10 minutes to reset the bios.....then try booting again.......if not then the bios could possibly be fried.....i had teh same problem with a computer i built myself...... ... HP Media Center PC 873n (P9875A#ABA) PC Desktop

T1100 emachine - restarts at windows logon screen

Have you made any hardware/software changes lately? If answer is no, reboot the pc and hit F8 a couple times. This will give you a list of options. Use your arrows and highlight last known good configuration and hit enter. See if your pc boots ok. If ... PC Desktops

Emachine EL 1200 06w Restore ???

\015\012tjbrown527 --\015\012\015\012I have no idea about the difference between XP Home and "Nettops", lol! But, I can help you restore :)\015\012\015\012Reboot your PC, when the very first screen comes up ... E-Machines eMachines Desktop PC

I have an eMachine T3410. When it boots, a screen

Well what i would try is typing  "\\minit\\system32\\biosinfo.inf download\015\012in google when you find the download go to system32 and replace the inf with the new one you just downloaded. that should fix the error ... E-Machines eMonster 600 PC Desktop

My computer keeps rebooting itself.

After doing what sandrew mentions in the previous post, and still getting the same problem, try resetting the BIOS (there should be a small jumper with three positions on it and a cap on two of them, close to the CMOS battery. you have to m ... E-Machines eMachines Desktop PC

Have emachines T6528 graphics problem

If it doesn't boot at all .( this is the reason that you see that message on the screen it means that no video signal came out from the computer ) ..try to change the cable that leads from the pc to the monitor first ...and if the problem its still o ... E-Machines T6528 PC Desktop

Emachine windows xp welcome menu comes up and then black screen and we have sound but no picture changed monitors still does the same thing.never been used for internet

Puddycat_196,Did you just performed a clean installation to your system? Or maybe you just replace a new video card? The blank screen normally caused because of the resolution setting which is too high for the screen to support, or maybe ... PC Desktops

Stuck on emachine screen

Hi thereHit F2 on boot up and get into the bios settings, if it lets you in choose default bios settings, save and reboot, see what happensGood luck ... E-Machines eMachines Desktop PC

Power on emachine T6420 and moniter is blank. The moniter soon loses contact with the computer. The fan run and power is OK there is no beep code.

If you mean after the computer performs the self test the screen goes blank and stays blank, eventually turning off you are having a hard drive problem. When the computer boots you should see an E-Machines logo and/or a self test on the screen. Tha ... E-Machines eMachines Desktop PC

Hi There, When I turn on my emachines D620 lab top the screen does not come on. It seems that the lab top is booting correctly but no screen. Can you help with this problem?

I would like to understand if the screen atleast flicker when the system is turned on. Is the screen power led lit on or flickering. In case you have no signal on the screen or no blinking also, you may have to get the lap for a HW repair as it could ... Computer Monitors

Emachines T2385 startup problem

Psu is a Power Supply issue but the black screen with a blinking white line is not.\015\012The blinking white line can mean there is no instructions to tell the Computer to boot up. Which could be possibly the system battery (cmos) or Hard Driv ... E-Machines eMachines Desktop PC

Need to know hot to start emachine el 1200 in safe mode

Depends on your operating system and bios i think.\015\012you cant do it any harm...honest...just press f6 or f8 i think as it boots and a screen will show up asking what you want to do next?....read the screen and follow the intructions as the ... E-Machines eMachines T3830 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5875 seconds