Having problems with your E-Machines eMachines W2686 PC Desktop ?

Emachine will not come on

\015 I've check the power supply cord and it still work but when I try to turn on the computer it will not come on\015

Answers :

Normally it is the power supply at fault; find a friend with a spare power supply and have them bypass yours and test to see if it the problem. Also, smell for burnt electronics - look for leaking capacitors, etc...pay a neighbor or pay best buy!
Reseat the power cord that is on the motherboard. Sometimes if you pull that cord from the motherboard (be careful there is a clip that is holding it to the board) wait about 1 minute then plug the cable back onto the motherboard your machine will possibly turn on. Also unplug your power supply cord from the computer when you do this. The other issue could be that the battery on the motherboard is dead.
Repair Help & Product Troubleshooting for E-Machines eMachines W2686 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a T2958 and toof the face off. Can you

EMachines doesn't give out this kind of info, and I don't have one in the shop. eMachines also had the habit, of using a few different manufacturer's of motherboards. Intel, TriGem, MSI, Asus,and FIC to name five. Plus eMachines wou ... E-Machines (T2958) PC Desktop

Emachines 2792 i have an emachines t-2792 and it keeps restarting itself before windows has a chance to load. it does the post fine and everything. i have tried a windows xp sp2 cd and it kept comming up with its missing files. then i tried the restore software that came with the computer and it seemed to take that but it still won't load windows. i get the xp simbol and then a flash of a blue screen and its restarts.

Pull the power plug as soon as the emacines logo comes on\015\012and if that doesn't work pull out the power as soon as the first windows logo screen comes on. it should then come on and give you the option to start in safe mode or regular mode ... E-Machines T2792 PC Desktop

Computer start but wont Boot up.

Here are a couple steps you can do to verify something didn't come on correctly. - Verify the monitor cable is connected tightly to the monitor and PC. - Verify the power cable is plugged in.If both of these check out is ther ... eMachines W3623 PC Desktop

Had virus so i went in to reboot by deleting all data. ran all 5 cd's and as was reinstalling it kept freezing up so would have to hold button in to restart. now all i get is a blank or blue, black, or blue screen w/ black lines ,that is if i can get it up and running. now it won.t start at all but the fans come on

Well, if you cannot get anything to happen except for hearing the fans spin up, then my guess is that the motherboard is probably bad, which is a fairly common thing for eMachines. You should at least get the POST (power on self test) screens, usuall ... PC Desktops

I have emachine w3400 not powering . plz help

I found this right on this website, hope it works!As for the fans, make sure your connections are tight and in the proper sockets. ... AMD eMachines Desktop System w/ 17'' CRT Display, 2.0 GHz Athlon 64 3000+ (W3400)

I would like an internal view of eMachine T4150 to be sure everything is connected correctly

There's a bit of a toughie! eMachines doesn't like to give out this information, lyndapalimas, and I don't have one sitting in my shop.eMachines used four different motherboard manufacturers, to my knowledge. TriGem, Intel, FIC, and MSI. ... PC Desktops

Emachine destop not recognising acer lcd monitor

It sounds more like the computer isn't starting up. The "no signal" message is coming from the monitor itself to tell you it's on but there's nothing coming in to display. Normally no special drivers are required for the monitor, and you'd see at lea ... Microtek C593 15" Flat Panel LCD Monitor


I don't see that this problem was solved. Adding additional information.The eMachines T6410 Desktop PC uses an MSI MS-7145 motherboard.(MicroStar International ), ... E-Machines eMachines Desktop PC

I accedentally knocked the power wires off inside the big box i cant think of the name on my emachine w3507 how do i put back together

Power On switch, (Button), wires from the front panel that go to the motherboard? I could really use the name of the motherboard, to try to get you this information. I don't have an eMachines W3057 sitting in front of me, at the mom ... eMachines W3507 PC Desktop

I have emachine w3052. The

The board should have markings indicating where to put the wire. It will probably be abbreviated such as "PW" or something similar. ... PC Desktops

When i turn on my emachines 420 at the mains, the led power light comes on, but it wont do anything else including turning on or off

Hello there,this sounds like a problem with your power supply unit inside the computer,emachines are always blowing there power supply because the one that comes with the computer just is not powerful enough.If you are confident enough around electri ... E-Machines eMachines Desktop PC

Power button on emachine t3882 have come loose

Look on the mother board,, with it on its side,, power button facing you.. On the Mobo look at the bottom left were all the other small plugs are. that come out of the face of the computer.. it should be marked PWB or SW ... E-Machines eMachines Desktop PC

Emachine monitor with a HP computer

I am trying to hook up a emachine monitor to my compac computer but the monitor will not come on there is another wire coming off the part that hooks in the compac but there is nowhere to hook it can you help me? ... E-Machines 19" Widescreen Flat Panel TFT LCD HD Monitor

Deleted sound card

Give your friend this information. Let him/her go to this website, and download it to their computer.This is eMachines Support, and the Drivers and Downloads page for the eMachines w3115,http://www.emachines.com/support/product_supp ... E-Machines eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop

How do I tell me emachine T5212 to recognize newly installed ram?

The Ram specifications for your model are: 1024MB DDR2 (2 × 512MB), 533MHz (PC4200)Expandable to 2GBIf you are using Microsoft Windows, the operating system will recognize the memory by itself, there is nothing you have ... eMachines T5212 PC Desktop

EMachines T2824. Does nothing but light on mainboard coming on...

This sounds like an old system and you have replaced the power supply, did you change the little round battery on the motherboard? It may have went bad with the power supply. Unfortantly, if a power spike took out the power supply, it might have take ... PC Desktops

Upgrade to a new motherboard?

Nothing happens at all except these:\015\012 \015\0121: The cooling fans come on in the correct manner.\015\0122: The "Power Light" comes on and just stays lit. No blinking!\015\0123: The CD Drive at the top does open and clo ... E-Machines eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop

E machin w3502 wont work at all

I am not sure what you mean "if you reboot you will loose all the data" or do you mean reformat your hard drive? You should be able to reboot your system in safe mode which will load only the minimal drivers for your system to work. Safe mode can be ... E-Machines eMachines Desktop PC

Emachine Monitor comes on a few minutes and cuts back off

I have the same problem and I think its the circuit board on the power on button and blue led. I unplug the board when the monitor is on and then the monitor stays on and works OK.\015\012It don't make any sence it is only 3 parts switch led co ... E-Machines eMachines Monitor E15T4

My T4060 will not come on - E-Machines eMachines Refurbished EMA VG31 T4060 eMachines (538053424) PC Desktop

Hello m_dmiller,There could be many reasons why the T4060 will not come on. The most obvious reason would be that it's not plugged in. But since it probably is plugged in there could be a failed power switch, power supply problem, hard dr ... E-Machines eMachines Refurbished EMA VG31 T4060 eMachines (538053424) PC Desktop

Emachines t2899 will come on and fans run but screen is still blank

Actually, the monitor is fine. The problem is that the computer isn't booting. The power comes on and the fans spin, but the system board isn't starting. Try reseating the memory modules in their sockets and clearing the CMOS memory using the jumper ... E-Machines T2899 PC Desktop

Installation windows xp emachine t5082

You must find "eMachine" XP USB drivers for your computer.\015\012If all USB support is "enabled" in BIOS, the conflict is with drivers.\015\012XP is loaded with many generic drivers, however eMachines is proprietary and requires eMachine ... E-Machines T5082 PC Desktop

Monitor does not always come on

Sounds like the power board is starting to lose it's dc voltage power and making it hard to start till the board warms.\015\012This will get worse and eventually it will die totally.\015\012You probably need to rehab the power and inverte ... E-Machines eMachines Monitor E15T4

Emachine laptop D620: reset password after system restored

Insert OS cd in drive and start reinstalling by selecting repair mode\015\012now once all files are loaded system will reboot when you see the Installing Devices progress bar, press SHIFT + F10this will give you access to your acc ... eMachines M6811 Notebook

Emachine won't come on

I would check the power supply box,If it is bad,you can get a replacement for under $50 and save the whole computer.\015\012\015\012\015\012Please rate this a fixya. ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2672 seconds