Having problems with your E-Machines eMachines T3830 PC Desktop ?

How to install memory for T3642 eMachine - E-Machines eMachines T3830 PC Desktop


Answers :

EMachines T3642 Computer takes the PC2-5300 DDR2 SDRAM DIMMs. Supports Dual Channel DDR2. Memory Type, and comes installed with 1.0 GB = 512 MB (removable) + 512 MB (removable) of Memory. You can upgrade your eMachines eMachines T3642 Computer to up to a maximum of 2.0 GB Memory, the system has 2 sockets to install Memory, already with 1.0 GB = 512 MB (removable) + 512 MB (removable) standard Memory installed. For best Computer performance use the maximum amount of allowed Memory per slot for your Computer.
\015\012
\015\012
\015\012INSTALLATION PROCEDURE
\015\0121. Place the computer power switch in the "off " position and disconnect the AC power cord.
2. Remove the computer top cover following the instructions in the model-specific owner manual.
3. Before touching any electronic components, make sure you first touch an unpainted, grounded metal object to discharge any static electricity stored on your clothing or body.
4. Locate the memory expansion sockets on the computer motherboard. If all the sockets are full, remove smaller capacity modules to allow room for higher capacity modules.
5. The ejector tabs shown in the illustration are used to remove a module. By pushing outward on the ejector tabs, the module will pop-up from the socket and it can then be removed.
6. Handle your new module carefully; do not flex or bend the module. Always grasp the module by its edges.
7. For most installations, DDR modules can be installed in any available expansion slot. Other installations may require the memory to be installed in a particular sequence based on the modules capacity. Check your owner manual to determine the correct installation sequence for your configuration.
\015\012
  • Insert the module into an available expansion socket. Note how the module is keyed to the socket. This ensures the module can be plugged into the socket one way only. Firmly press the module into position, making certain the module is completely seated in the socket. The ejector tabs at each end of the socket will automatically snap into the locked position. Repeat this procedure for any additional modules you are installing. install_ddr.gif \015\0128. Once the module or modules have been installed, the computer top cover can be reinstalled.
    9. Plug in the AC power cord and reinstall any cables disconnected during the installation process.
    10. Turn on the computer and follow the instructions in your computer owner manual that describe the steps necessary to allow your computer to recognize the newly installed memory.
  • Repair Help & Product Troubleshooting for E-Machines eMachines T3830 PC Desktop

    Tips for a great answer:

    - Provide details, support with references or personal experience .
    - If you need clarification, ask it in the comment box .
    - It's 100% free, no registration required.

    Suggested Questions/Answers :

    How to install memory for T3642 eMachine - E-Machines eMachines T3830 PC Desktop


    EMachines T3642 Computer takes the PC2-5300 DDR2 SDRAM DIMMs. Supports Dual Channel DDR2. Memory Type, and comes installed with 1.0 GB = 512 MB (removable) + 512 MB (removable) of Memory. You can upgrade your eMachines eMachines T3642 Computer to up ... E-Machines eMachines T3830 PC Desktop

    Producr assistance In November of 2007 I purchased an eMachine model number T5230 desktop pc. My son is having trouble loading some of his games and I would like to know exactly what I need to purchase to increase the speed and memory of this particular model. Thank you. [email protected]


    Many of the newer machines for sale now unfortunatly do not include a seperate and powerful video card. The machine comes with an internal video card that shares the machine's memory for video loads; iy is built into the motherboard to reduce the sel ... E-Machines eMachines Desktop PC

    How to install ram


    Most E-machines have shared video memory. to increase the amount, enter the set-up utility before windows boots and change the amount to the max.the ... E-Machines eMachines Desktop PC

    How to rid my computer of viruses - E-Machines eMachines Desktop PC


    Follow "best practises":\015\012 1. backup your data files, your E-mail and your Contacts (to USB memory-stick or external disk-drive)\015\012 2. inventory the installed software, and find the "license-keys" for the commercial software, e ... E-Machines eMachines Desktop PC

    LCD monitor signs "no signal" on eMachines t3418


    E-machines had had a long history of bad power supplies. I've seen many of these machines go bad and when they do they take out the video chip (Nvidea) with it, usually shutting down the whole machine. I've never seen one operable. You might be ab ... E-Machines eMachines Monitor E15T4

    PC freezing up after memory upgrade


    You can use a utility called CPU-Z to find the timing of the memory installed in the PC. Then check your memory documentation (I could find no specs at the Samsung site) to make sure they match in the BIOS. I would remove one stick and see if the p ... E-Machines (T3104) PC Desktop

    My e-Machine W3115 automatically shuts down multiple times


    1) Computer off, and unplugged from power. (Unplug from the surge protector FIRST, then unplug the power cable out of the power supply)2) Work on a table where you have plenty of room.Open the computer case. (Rear of computer, ... eMachines W3115 PC Desktop

    Upgrade Question..? I looked in many places and it seems that no site can offer me a straight answer. I own a T3830 Desktop E-machines computer. It has 1.5 GB (about) of RAM. It has a 80 GB harddrive and an Intel Extreme Graphics card allready installed. I was wondering if someone could tell me what is the best graphics card I could install on the computer without a lot of hard work involved. If work is involved that is no problem anyway. Thanks!!


    Hello lkou14, Well, basically you are only restricted by your budget ;) If your CPU is high-end, or at least above 1.5Mhz, take a look at ... E-Machines eMachines Desktop PC

    Seeking to install more RAM - E-Machines eMachines Desktop PC


    There are numerous sites that have memory advisors that will tell you exactly what kind and how much memory your system can accommodate.\015\012As previously requested, you will have to have the model number available as a minimum.\015\012\015\ ... E-Machines eMachines Desktop PC

    I upgrade the memory of a Dell Dimension Desktop 9150 from 512 MB to 2 GB,The machine accept up to 4 GB..In the BIOS appear the 2 GB but on system in Control Panel only shows 512 MB..Can anybody give me a tip on this? Is the second time that this happened to me,The first time I upgrade a laptop to 4 GB and only recognize 3GB. I found the answer in the Internet,I have to install a 64 bit OS. This Machine the Dell Dimension Desktop 9150,has Windows Home Edition,but in the BIOS said 64 bits Tecnolo


    No you don't have to install a 64 bit OS. Only if you install over 3 gigs you MUST install a 64 bit operating system. 800MHZ is fine it will just back down to 667MHZ. your 32bit windows OS will see up to 3 gigs (minus graphics card memory). SO 2 gigs ... Dell Dimension 9150 (DIM915MIN) PC Desktop

    Cpu upgrade , please help


    Tech-gu818, When looking to see what processors a computer will support, try to find out what motherboard chipset is on the motherboard, and the processor socket.The motherboard chipset is the;1) Northbridge chip2) ... E-Machines eMachines Desktop PC

    USB ports don't recognize memory sticks or external harddrive.


    If your using a usb hub or similiar, try connecting directly to the front or the back of your machine.Do you have another USB cable to try or is the usb connector directly on the USB device?Try these steps to reinitialize your us ... HP Computer Utilities & Maintenance

    Usb device not recognize


    You mentioned that you uninstalled the unknown device from the Device manager. If you uninstall it then connected your usb flash drive you will see an error again on your device manager. This means that the driver for your usb port is not properly in ... Dell Inspiron 6400 Notebook

    Emachine t5206 adding 2 gig of memory


    I had/have same machine and when I bought it, I read book frnt to back, and all over, its only expandable to 1gb ram. I know it haas four slots but when I consumer reports.com'd it back in the day that was the 1 low mark it got, only expandable to 1 ... E-Machines eMachines Desktop PC

    Our computer is so slow lately. It takes ages for it to respond to a comand. There is no apperant reason for it. Could it be that there are different programs hindering each other? I am very new to the computerworld, so excuse my naive way of discribing the problem. Thank you so much in advance! Gaby


    Well there is many causes slow your pc do this steps:Remove any programs you donot use it .donot install more than 1 anitvirus program on ur computer.delete cookies and temporary files.change the virtual memory size, give it t ... PC Desktops

    How to access windows drive to backup data through using the recovery disk


    You are in luck. There is a wide variety of solutions available to you, but which you can use will depend upon your configuration. You will need access to another computer that is working, and has a cd-burner and an Internet connection.Go ... Toshiba Satellite M30 Notebook

    EMachines T3830 PC Desktop - HOW TO INSTALL A VEDIO CARD


    There are a couple of things it could be. From simply checking the cable on both ends (computer to monitor) to see if they are loose. It could also be the card is damaged. I would check it with a second monitor to be sure. ... E-Machines eMachines T3830 PC Desktop

    Purchased more memory from 256 to 512 the tech that installed the memory installed the 512mb DDR 2100 and left one of the 128 chips installed to give a total of 640mb ram receive error message "out of memory at line 89"


    Run Registry Editor (Regedt32.exe). 2. From the HKEY_LOCAL_MACHINE subtree, go to the following key: \\System\\CurrentControlSet\\Control\\Session Manager\\SubSystems 3. Select the Windows value. 4. From the Edit menu, choose Stri ... Gateway PC Desktops

    Newer system with higher performance specifications


    To maximize the best performance for your model, you would need\015\012\015\012- Highest CPU 1.80GHz\015\012- Maximum memory amount installed (2 x 512MB PC2700 DDR)\015\012- Virtual Memory / Paging File size set correctly ... Compaq Evo N1000C Notebook

    Ram problem I have a Emachine pc running Vista with 512 Ram but my computer says i only have 502 ram


    The fact that 512 MB of RAM is decreased to 502 should not result in any performance problems, as this is a minimal difference. You could have faulty RAM, which would result in the 10MB not being visible to, or useable by, the system. Also, the vario ... E-Machines eMachines Desktop PC

    What controls memory capacity?


    The maximum amount any computer will work on is 4 gigabytes. You may see some specialty models with 6GB but that is a waste of money because programmers write programs for a maximum of 4GB as that is the industry standard. The maximum memory capacity ... Dell Inspiron 2650 Notebook

    I need printed help installing memory for my Dell Windows XP Desktop computer.


    Yoy will find the User's Guide and Service manuals at the following URL http://support.dell.com/support/edocs/systems/dim4600/en/series_en.htmThe service manual for your specific machine has the details you want. (There are two possible l ... Dell Dimension 4600 PC Desktop

    THE SCREEN SMEARS NAD SHUTS DOWN


    Hi eakesj:A number of things here should be checked.First shut down and remove all cards, and power connections to all the drives such as cdroms, hard drives. The power supply should also be looked at and tested for correct voltage ... eMachines T6534 PC Desktop

    I bought this emachine in july and it had to be restored because it lost my personal settings it said then after the restore it lost my desktop icons and taskbar and now it only comes on the widows xp screen then restarts over and over you cant get xp blue screen or anything ...I know i will never buy another emachine piece of **** again and I will tell everyone I meet what kind of garbage it is


    If this was a new machine & still under warranty I would take it back to get it repaired. I suspect that it hasgot a hard drive that could be on the way out. If this is a second hand machine, get a new drive & re-install Windows or install Li ... PC Desktops

    EMachine T3642 Downgrading


    Here is the eMachines page with all the driver downloads for the motherboard in your machine. ... eMachines T3646 Refurbished AMD Desktop Computer - AMD Sempron LE-1250 2.2GHz, 1GB DDR2, 160GB SATA
    • Start your question with What, Why, How, When, etc. and end with a "?"
    • Be clear and specific
    • Use proper spelling and grammar
    all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
    Load time: 0.9918 seconds