Having problems with your E-Machines eMachines T3830 PC Desktop ?

My monitor is on and working but everything is sideways


Answers :

You need to set the properties for the monitor corectly,
Repair Help & Product Troubleshooting for E-Machines eMachines T3830 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

15" Dell monitor


You have your video card set to rotate the screen after Windows loads.\015\012\015\012Go into your display properties using it's control panel and look for the rotate section. Set it back to 0 degrees. Make sure you click apply and then ... Dell E151FP 15" Flat Panel LCD Monitor

Westinghouse lcm 19v5 won't power on period


I have a Westinghouse LCM-20v5 that would have problems powering on, and then it would power on for about 1/8 sec and lose the picture. It died 1 year and a few months after purchase. That sucks. LCD screen problems are often caused by the interna ... Westinghouse LCM-19v5 Monitor

Installed new equipment, now monitor is blank


Just dump everything and buy a branded new PC....\015\012u will be increasing ur BP....it;s not worth this much effort....\015\012the kind of work u have done...it seems ur an expert so u urself work it out what's wrong...and where did u ... PC Desktops

My computer does not start up


Hi im josh in cebu phils.may i help you? Friend try to use these solutions i got this in my book.\015\012Dealing with System Startup Problems\015\012There's nothing scarier than turning on your computer and finding it doesn't start. What you d ... PC Desktops

Computer Does not Boot correctly, Monitor is Black.


Very interesting...Might try the following...\015\012- Video. Yes, almost garuntee that it is either the video card/onboard or the cable. Look at the cable and cable connectors and see if one of the pins has been shoved in. This is common. O ... PC Desktops

Monitor is blank!!!!


I had the same problem with my Toshiba laptop. I found that by opening or closing the screen slightly (with the computer on), the display suddenly returned and stayed on. I assume there is a problem with the contacts or connection. ... Toshiba Satellite A105 Notebook

Cannot get new Motherboard to boot up in Normal Mode


What u may have done is wwhen u were installing the new board, gave a static shock to the system...that will cause only the fans to come on and nothing more...this is a bad problem bc u cannot fix it...if u figure out something else is wrong, and it ... Gateway PC Desktops

LCD Screen blinks on & Off at start up up-to about 10 minutes


Okay, forgive me if I go over covered ground but reading the post, I only see your responses, not what was recommended. From everything I've seen the problem lies in one of the following areas.\015\012\015\012\015\012 ... ViewSonic VX922 19" Monitor Flat Panel

I'm having a problem with a T30 notebook in that I can't power it on. When I press the power button, all the normal lights come on for about 3 seconds, then all go off except the sleep light (the one with a sideways circled 'z"). The monitor appears to be back lit, but that's all I get. Nothing ever appears on the monitor. This has happened in the past. When it happened, I would remove the battery, unplug the power and wait a few minutes and plug everything back together. Then, it would work fin


Remove the battery and use the needle to shift electrical contacts of the battery closer to each other, then put the battery back and you'll get your laptop back. ... IBM ThinkPad T30 2366 Notebook

Speakers killed my moniter


Well as you have already tried disconnecting the peripherals from your computer, and tried restarting the computer too which did not help you, it sounds to be an hardware issue with the monitor. However if incase you have not tried this, you can disc ... Dell Dimension 2400 PC Desktop

Cannot get monitor out of sleep mode


About 90% of the time this is a cable problem. Check the connection on both ends. Make sure the cable is firmly seated. If it is, pull out the cable and check the ends to make sure that none of the pins are bent. If so, straighten the pin back out an ... HP PC Desktops

Screen went Blank (Black) with no Power Indicator


The VGA cable for a CRT monitor is the same as the VGA cable for an flatscreen monitor. The VGA protocol hasn't changed between the two technologies, so if you tried it with a different known working cable and it still didn't work, then it is the mon ... Sceptre X9G-NagaIV 19" LCD Monitor

Got a new surge protector/power strip. I


First, plug the monitor directly to the wall socket and bypass the power strip. Next, connect the monitor into a known working computer to isolate the problem.If the monitor works on another computer, then there could be a pro ... Samsung SyncMaster 731B 17" LCD Monitor

Steps tp instal Nvidia 6200 AGP card


Once you have your computer unplugged and taken apart to the point where you can access the AGP slot, take off the small metal cover on the back of your computer (usually fixed with a single screw). Gently place the Nvidia graphics card into the slot ... AMD eMachines Desktop System w/ 17'' CRT Display, 2.0 GHz Athlon 64 3000+ (W3400)

Hp pavilion ze5500 display monitor still doesn't work


IT could be a motherboard problem with the function key that controls the switching of the video infomation between the LCD screen and the external video connector.\015\012It could be the function key circuitry on the motherboard that controls ... HP Pavilion dv6000z Notebook

Control buttons on side of L2210NW monitor quit working


... Westinghouse Electric L2210NW Monitor

Connecting lap tops to monitors...


Try connecting a mouse and keyboard to the laptop and then start it with the top closed. Not sure if this will work on your model, but it works on a lot of laptops. This should force the PC to use your external monitor as the primary one. ... Dell Inspiron 6400 Notebook

LG screen goes in stand by. I was using two monitors for several months, everything OK, now I decided to get a new LG Flatron instead of one of the monitors... and only this one goes in safe mode!! Two screens plugged in: Philips analogical working fine no problems. New LG Flatron digital goes in power save mode after few minutes Tried to plug in ONLY the LG, same problem after few minutes. Philips monitor no problems. So it HAS to be a screen function or problem of the LG? Computer: AMD + 3Ghz


Oke having a similar problem atm, this is what i have found so far. was trying to help a friend who has bought the same 19" LG monitor. When i connected the monitor to her PC i noticed that it was not the same connection as the previous one but it ha ... LG 19" Widescreen Flat Panel LCD Monitor

NEC LCD 1912 (silver)


FAX them the SKUs and the receipt and the warrantee saying 3 years, is what sounds right in this case. Their bench fees sound pretty normal otherwise, and appropriate since you disassembled the monitor.What was the matter with your flats ... Computer Monitors

Computer Does not Boot correctly, Monitor is Black.


Hmm it seems to be problem with Power Supply, but still if you can give a try connecting your system into other socket may be which is properly grounded one.\015\012\015\012if the above didn't fix your issue, i would suggest you to disassemble ... PC Desktops

Computer Does not Boot correctly, Monitor is Black.


Try to reinstall the OS..if it doesn't work then there would be a problem with ur motherboard becaouseof failure of IC's. So contact the service men. ... IBM Aptiva E 240 (2158240) PC Desktop

Installing more memory


Hi if you go to this site first www.crucial.com then look on the site and it will then scan your computer for you telling you exactly what memory you need like p100 or p133 as getting the wrong one will cause your computer to stop working ok. ... Compaq Presario 5000 PC Desktop

Colour blending problems.


Try updating your video card drivers as well as your monitor drivers and see if all the resolutions work at that point. If they work then everything is good to go, if it doesn't work then try another working monitor and if you still have the color bl ... Hannspree HANNS-G 19" Widescreen Monitor

Acer 20" LCD monitor AL2016W, INPUT NOT SUPPORTED message


Try to reinstall the drivers for the monitor and see if that works.\015\012\015\012http://www.driversdown.com/drivers/A ... Acer AL2016W 20" LCD Monitor

DVI input on monitor not working


Contacted viewsonic about this issue- they suggested- have both dvi and vga hooked up to same machine. start with poweroff on both. power on monitor, then power on computer. when you see display coming from the vga, power off pc, then disconnect vga ... ViewSonic VX2025wm 20.1" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7664 seconds