Having problems with your E-Machines eMachines T3830 PC Desktop ?

NEED POWER SWITCH WIRING FOR A EMACHINE T-3095

\015 HI\015\012 I DID NOT CHECK FOR MOTHER BOARD FOR THE POWER LED,HDD LED AND POWER SWITCH MARKINGS BE FOR I TOOK IT APART.\015\012 JEFF\015

Answers :

Check on the motherboard there should be a small prints on it near control panel.
Look for orange 10 pins. pin1=Red (HDD LED) Pin2=White (HDD LED). pin3=NC, pin4=NC, pin5=NC. Next column pin6=NC, pin7=NC, pin8=Black (Power SW) pin9=White (Power SW) pin10=NC. Right next to 3 black pins are pin1=Green (Power LED), pin2=White (Power LED).
Repair Help & Product Troubleshooting for E-Machines eMachines T3830 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a T2958 and toof the face off. Can you


EMachines doesn't give out this kind of info, and I don't have one in the shop. eMachines also had the habit, of using a few different manufacturer's of motherboards. Intel, TriGem, MSI, Asus,and FIC to name five. Plus eMachines wou ... E-Machines (T2958) PC Desktop

Wires from switch came unplugged (white and black) where do they


Power On switch (Button)? Restart switch? Speakers?Wires came loose from the motherboard?Should like you to see if you can trace the wires back to the front panel, (Where the Power On button is located Granted, this may be a little tough ... E-Machines eMachines Desktop PC

EMachine no power


Ok for a start the power switch is not green and white that is the power led, you need to look for a red and black wire normally marked on the connector and motherboard as pwrsw or pswitch.\015\012if you believe it to be the switch unplug the c ... E-Machines eMachines Desktop PC

Need where pwr sw and pwr led and hdd led plug onto au31 motherboard


FIC AU31 mb (a.k.a K7m-NF18G mb)Pin Configuration = PinoutThe Front plastic panel of the computer is the Front Panel.The area of pins on the motherboard that the cables (Wires) go to, is the Front Panel header.Front Panel head ... E-Machines T3092 PC Desktop

Need to re-attach power button cable, hard drive


The manual for your computer is available from emachines, p.168 shows the info you need (replacing the front I/O panel)\015\012 ... E-Machines eMachines Desktop PC

I need a diagram for wiring a new power supply to a Gateway 509ge.


Although this problem is a year old, no solution was stated.Stating this in the hope it may help someone in the future;This is Gateway Support, and the main support page for the Gateway 509GE Desktop PC, ... Gateway 509GE PC Desktop

Had to replace power switch on emachine computer need to know where wires go


I'd like you to look at this motherboard, and compare it to yours. It's an Intel Seabreeze T3 motherboard. My data states it was used in many computers, and the eMachines T3830 being one of them. ... E-Machines eMachines T3830 PC Desktop

My emachines T3828 will not power up. I changed the power supply, but that didn't help. my next suspect was the power switch. I found that the wires wer a little loose. Thinking that the power switch wires were one unit, I pulled them. Imagine my surprise when I saw that they wer actuall three seperate wires, One black and white, One blue and wdhite, and one red and white. I need to know how to reconnect them, and in which order. I also noticed that a green light comes on. I assume this is for t


Hello there,The green light on the motherboard is there to indicate that you are in fact getting power to the board, which is good. The wires you refer to are in fact the power switch, reset switch, and probably some type of ... E-Machines T2742 PC Desktop

Front panel leads Emachine model T2862


E-machine model T2862 pin-out for the 10-pin front panel header is screen-printed on my Emachine's motherboard, but is so small and far away from the actual pin location, that it is likely being overlooked. If looking into the computer case from the ... PC Desktops

Emachine t2742 I also have a wiring problem!


Gtater,It's ironic that you ask me this question today-- i am just now carrying in another eMachine computer to fix. Anyway, unfortunately I do not have one that is the same model as yours (T2742). However, I did some quick research and found t ... E-Machines eMachines Desktop PC

Problem with power connections on emachine T2596


Take a peek at this link,http://www.duxcw.com/faq/mb/frontpanel.htmit may assist you in your problem ... eMachines PC Desktops

Installed a new Optical Drive and require assistance in the wiring


What kind of optical drive? Is this a CD, DVD?, Blue ray,or an opto-ferro-magnetic floppy?Generally:1) External drive: ============ a) just power it up and connect it to the PC using an USB or ... PC Desktops

A power diagram for restoring power for a emachine


Hi there if you look real closley at the wires they are labled such as (pwr)led (reset) (hdd led ) (remote switch this the power for the computer) ect ect now look real closley and you will see the same markings on the edge of the board ... E-Machines eMachines Desktop PC

Bad power supply, installed new one, get green light on mother board; but doesn't boot up. Bad start up button?


Yes, it is my belief that it is the Power On button. To test this, there is a simple solution. I however, would like to caution you at this point.You will have the power supply plugged in. There will be a small spark. I wouldn't advise how to t ... PC Desktops

Tried new power supply but didn't help. (Who knows - maybe I didn't install correctly.) I first thought it was the power switch on front of machine. Was wondering if some easy test for power switch?


Tips from me:1.If your power supply isn't coming on, I advise you to check the 20/24-pin motherboard power cable, connector, and be sure it's down in tight. Make sure that lock tab of the power cable connector, snaps over the mother ... E-Machines eMachines Desktop PC

EMachines T3092 MoBo Layout


Here is the website for that particular mother board. This should give you what you need.\015\012\015\012h ... E-Machines eMachines Desktop PC

My computer light turns on then off, no fan no screen


Changed the power supply and Power On switch?New parts? Okay. We'll come back to them. For now, lets look over some simple things.I can tell you that even after 20+ years as a tech, I still get a little zealous, when it comes to bui ... Smart Modular SV3170A

Packard bell imedia 1402 will not boot up power button is flashing amber twice every second also amber led right hand corner on motherboard


Sorry, I stepped out. Otherwise I would have answered right away.Your power supply changes your household, (Residential),or business electricity, into three main voltages. Also converts it from AC to DC electricity.1) 3.3 Volt ... PC Desktops

T-5010 Power supply issue


The voltage switch should be a small red switch, right below where the power cord plugs in. you will need a small screwdriver to switch it easily.\012if you are getting no power at all, i would also check all the wiring connections on the ... E-Machines T5010 PC Desktop

Emachine Won't power up


Just because it has a SATA plug doesn't mean you'll need it- especially if your machines a few years old. If your hard drive doesn't have the sata connections, then you probably won't use it. \015\012 As to why it still won't power up- how did ... E-Machines eMachines Desktop PC

Installed an Upgrated Mother Brd,in my Hp Desktop Tower,but the power Switch receptacle in the New Mother Brd has 16 pns


You need to track the wires from the case front panel to thier locations: one will be your power switch, one your reset, one hard drive activity light, and one your power light. You want to note and label which light or switch they go to then go to t ... PC Desktops

Reconnecting power swith, LED light for power and hard drives on emachine


Yes that is true if you look at your wires ahnd you will see that one says hdd and one says spkr and so on now look closley at the board and you will see the same thing on the moboard if you are not abloe to read it you should be able to go ... E-Machines eMachines Desktop PC

Need correct MOB location for power switch on emachine W3410.


What kind of motherboard did you change..?try to search in the internet.. just type the name of the board and including the diagram.. sample.."ASUS MOTHERBOARD POWER DIAGRAM"... ... PC Desktops

Emachine front panel power switch


Here's the Support Link for your desktop. Look under User Guides, Hardware Reference. Also look on the motherboar ... E-Machines T3958 (827103050974) PC Desktop

I need to know what colored wires go where on my customers PC hdd led/ power sw/ and power led


The only reason to have removed them was to switch the board or put the board in a new case..if you put a new board the new board is what you have to go by, look in the book, or take the number off the motherboard and go to yahoo and type in schemati ... E-Machines W4685 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.3889 seconds