Having problems with your E-Machines eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop ?

Emachines T3958 will not turn on

\015 The computer worked fine before, today I turned it on and all was well but I left it on the 'enter password' screen for a few minutes then it shut itself off (as it should) but now it will not turn back on no matter how many times I pressed the power button. there is a green LED inside working so I don't think its the power supply.\015

Answers :

Check the fuse on the inside of it and see if it is not blown, if not blown change it any way it may not look like it is blown but it is hard to tell, and see if that work.
Hi there,
\015\012 if the blower fan on processor is rotating and also on the power supply unit is running your power is fine,try to refresh your hardisk it might be a loose connection on ide hardisk cable,unplug your unit and open cover of cpu and disconnect ide cable from mother board and hardisk then connect it back,plug your unit and start to run again,if symptom persist
\015\012try to run your pc with out hardis and cd room
\015\012disconnect hardish and cd room form mother board,and switch on again if the star menu windows appear,if not try to isolate replace your video card and memory card one by one to check which part is busted,if video card or on of memory card is busted replacce a new one and put back again and run your pc again.
\015\012if run fine its done by your self have a nice day,regards
Repair Help & Product Troubleshooting for E-Machines eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

EMachine T3958 Won't start - Please help


The green LED indicates that the standby voltage is present which is what provides the power so the front button can tell the unit to turn on fully.\015\012At that point, there are 3 possibilities; the power supply has a fault and won't turn on ... E-Machines eMachines Desktop PC

Emachines T3958 will not turn on


Check the fuse on the inside of it and see if it is not blown, if not blown change it any way it may not look like it is blown but it is hard to tell, and see if that work. ... E-Machines eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop

Tried to add RAM but now computer won't turn on


Hi there.Take the ram out, turn the PC on and tell me if it beeps ... E-Machines eMachines Desktop PC

Emachine t3958 Hi, I turned off my t3958 by pushing the power button and now it want come back on. I ohm the switch, not sure what it should be but it 0 out. I pulled out the mother board and inspected it, nothing looks or smells burnt. With the mother board out I plugged the power supply in to a outlet and one fan started running but only for a second then stopped. I then waited a few minutes plugged it back in and it did the same thing and if I unplug and then plug right back in again it does


First check to see if a drive died. Unplug all the drive Floppy, hard and dvd or burns. I have come across many time that a drive will die and keep motherboard from booting. Being that you say you get a green light on the motherboard shows that the ... E-Machines eMachines Desktop PC

I have a emachine t3958 it will not turn on - E-Machines T3958 (827103050974) PC Desktop


Your power supply has gone out. This could have been caused by a surege, dust or bad power outlet.\015\012\015\012You can purchase a replacement off eBay for under $25.00. ... E-Machines T3958 (827103050974) PC Desktop

Bad power supply, installed new one, get green light on mother board; but doesn't boot up. Bad start up button?


Yes, it is my belief that it is the Power On button. To test this, there is a simple solution. I however, would like to caution you at this point.You will have the power supply plugged in. There will be a small spark. I wouldn't advise how to t ... PC Desktops

My emachine t3958 was working fine. i went on vacation, disconnect the power and when i came back and tried to turn it on it did nothing.


Possibly a power supply. Be sure to check all electric cords, etc. first. ... E-Machines eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop

Emachine T3958 wont turn on


Check if the fan on the power supply is blowing out the back of the case where you plug the mains lead in.If not then you need to replace or repair the power supply unit. ... E-Machines eMachines Desktop PC

I have a emachine model t3958


Try to reseat the power cable of the computer and power it on again ... E-Machines eMachines Desktop PC

Emachine t5026 on and right off


Hi maybe you could try these steps I'm always doing when I experience the same problem as yours. This is only according to my experience fixing desktop computers.1. Try to disconnect all the connection at the back of your computer tower t ... PC Desktops

Weird blink problem...


That's definitely a hardware (incompatiblity) problem. Download the most updated driver for the graphics card. Also see if there is a monitor driver for the monitor.I understand it worked seamlessly for the emachine but you should switch ... E-Machines eMachines Monitor E15T4

Emachine t3524 keep restarting - E-Machines eMachines Desktop PC


Suspect bad Electrolytic Capacitors, in the motherboard Voltage Regulator circuit, of the motherboard. eMachines motherboards are known for having bad 'Caps'. Low quality, due to poor quality of components used in the capacitor. ... E-Machines eMachines Desktop PC

Beeping emachine desktop won't turn on


Hi shyguy, Before I address your issue, I figured you ought to know: Buying an emachine is one of the worst moves a consumer can make. Why? because despite the fact that they are cheap, they frequently have problems, which can ... E-Machines eMachines Desktop PC

Emachine T2542 Won't power on


It looks like your computer's power supply unit is gone. This is common with the eMachine T2542 series. Unfortunately, sometimes this destroys your motherboard as well. ... E-Machines eMachines Desktop PC

No power on my emachine


The power supply might be okay but the system board could be bad and not turning the power supply on when you press the power button.On this page:http://www.helpwithpcs.com/courses/power-supply-basics-inc-pinouts.htmabout midw ... E-Machines eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop

EMachines E19T6W monitor turns itself off and on.


First off, I would check the monitor, if it is getting very warm, I would use a can of compressed air to blow the dust out (make sure it is unplugged first!). Second, I would check for any sort of interference in the vicinity (speakers are a huge cau ... Computer Monitors

EMachines T6528 desktop will not boot up


The power supply fan runs from either 5V or 12 so that only tells you that the voltage for fan operation is present.\015\012\015\012If you don't have a multimeter already, I would highly advise that you buy one.\015\012They are available for &l ... E-Machines eMachines Desktop PC

EMachine W3107 will not boot, no display.


Have you tried a different Graphics Card, looks to me like the onboard graphics card is at fault, there should be an AGP slot or PCI slot that you can plug a new Graphics card into then you should be fine... ... PC Desktops

Emachines problem... PSU works but comp doesnt turn on


Hi,\015\012I don't want to tell you a color because it could be different than the actual. Look at the front of the computer and trace the wire that goes to the switch and follow it to the mother board. If you have a volt meter you could measure the ... E-Machines eMachines Desktop PC

I have an emachine W3400. When you turn the power


Pc turns on but monitor keyboard mouse dont work i hold power button 5secounds or more the pc still dose not turn off till i un plug cable ... AMD eMachines Desktop System w/ 17'' CRT Display, 2.0 GHz Athlon 64 3000+ (W3400)

My emachines wont turn on


Also in addition to the above, try reseating the ram chips..take them out individually and plug them back into their respective slots..might be the miracle cure..If the motherboard fan turns on, it might just be bad memory..replace RAM chips ... E-Machines eMachines Desktop PC

Emachines pc help plz


Besides MSN, what else can you not do? ... E-Machines eMachines Desktop PC

Emachine T6410 turns on but the screen says ''No Signal''


When you get the no signal ..this is just the cable that plug into the monitor...either on the video card ..or on the monitor side...but it is sure the cable ...whenever that signal is on ...this means that it do not detects any video signal came fro ... PC Desktops

Emachines W3052 Gets stuck on logo screen when starting up.


My computer does a similar thing, the issue with mine is the mother board which requires everything to be at a certain temperature. Let it run on the start screen for a couple minutes and hit the reset button. If it doesn't boot up you're going to ha ... E-Machines W3052 PC Desktop

Alarm sounds when the computer is turned on


Chang youre flix and screen ... PC Laptops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3671 seconds