Having problems with your E-Machines eMachines Monitor E15T4 ?

Emachines I turned off my computer one evening & the next day it wouldn't come back on .The monitor kept saying on signal.I repeatedly turned it on & off & eventually it came back on.This happened 3 weeks ago & each time it is shut down it takes longer & longer to come on. The last time it took 3 days.I notified emachines of this problem & they said to reseat the memory which I did & this was not the problem.Do you have any solutions before I take it to the repair shop?


Answers :

Are you hearing the fan running or seeing any lights on the system box or keyboard?\015\012
\015\012If it is not showing any signs of life, the main power supply has failed; these are built as poorly as anything in your PC and one of the most frequent failures. The fact that it was taking longer each time was an indication that the supply was dying.\015\012If your find this to be true, you can buy a replacement supply on eBay for < $20 US and DIY.\015\012The supply you need will likely be an ATX standard and before you buy one, you should have yours in hand to compare the connector complement since there can be differences.\015\012
\015\012On opening the case of the system box, touch some bare metal of the chassis to discharge any static charge you may have from carpeting or clothing.\015\012
\015\012Removing the supply should be easy; there are four screws holding the supply to the back of the system box (this is where the rear fan is located which is part of it) and a dozen or so connectors going to the drives and main board. Remove the connectors first.\015\012Be careful removing the main board plugs as you don't want to stress the board too much; they have hundreds of fine traces on them that can be broken if stressed the wrong way.\015\012
\015\012When reinstalling the replacement, note that there are a number of identical plugs and they are totally interchangeable and you will likely have several left over that are not needed unless you add a number of drives or other add-on cards.
Repair Help & Product Troubleshooting for E-Machines eMachines Monitor E15T4

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Emachines I turned off my computer one evening & the next day it wouldn't come back on .The monitor kept saying on signal.I repeatedly turned it on & off & eventually it came back on.This happened 3 weeks ago & each time it is shut down it takes longer & longer to come on. The last time it took 3 days.I notified emachines of this problem & they said to reseat the memory which I did & this was not the problem.Do you have any solutions before I take it to the repair shop?


Are you hearing the fan running or seeing any lights on the system box or keyboard?\015\012\015\012If it is not showing any signs of life, the main power supply has failed; these are built as poorly as anything in your PC and one of the most fr ... E-Machines eMachines Monitor E15T4

Re: Errors being experienced with the ACER ASPIRE 5100-5758, OS VISTA. Error dealing with BUS:06, DEVICE:04, FUNCTION:00 AND ON TO FUNCTION:03


Hi, Nice report. We don't see these too often. You've had quite a few tech inclined people on your machine. My first hunch was memory timings and that could still be the problem. However, there is also memory on the display ad ... Acer Aspire 5100 Notebook

PC won't boot after changed BIOS memory settings


With all that you've done, you might have worsened your PC mobo's condition. Now try to remove the processor and memory then PLUG it normally to the power outlet and see if the led in the mobo lights. After 3 minutes, unplug it and reseat the rams an ... Toshiba Satellite A135 Notebook

Emachine t5026 on and right off


Hi maybe you could try these steps I'm always doing when I experience the same problem as yours. This is only according to my experience fixing desktop computers.1. Try to disconnect all the connection at the back of your computer tower t ... PC Desktops

My HP Pavilion dv9005us has two issues which I cannot resolve. The wireless device is not even recognized or detected by the computer, and there seems to be an electrical problem where the lighted buttons at the top flicker on and off from time to time, which may also be linked to an issue where the computer will at times refuse to turn on after I press the on button and watch it all light up in response and immediately shut off. Any help with this would be greatly appreciated.


Sorry to here about your DV9005us start up problems.1st. It would be good to know any other problems you may have had in the past either related or non related to you current problems..\015\0122nd. Has the unit be ... HP Pavilion dv9005us Notebook

Monitor not coming on - Packard Bell Easynote R4650


It's a dreadful way to start a day - you press the power button on your computer and nothing happens. Do not fear because all may not be lost! Follow these simple steps to determine why your computer won't turn on. Note: It is very import ... HP Pavilion a305w (DM181AR) PC Desktop

My e-Machine W3115 automatically shuts down multiple times


1) Computer off, and unplugged from power. (Unplug from the surge protector FIRST, then unplug the power cable out of the power supply)2) Work on a table where you have plenty of room.Open the computer case. (Rear of computer, ... eMachines W3115 PC Desktop

An E1505 went dead after water spilt on it


Good morning donbart,Sounds like you probably did in the motherboard. They have a number of surface mounted fuses that are not easily replaced without specialized tools and training.However, before we jump to that conclusion, there ... Dell Inspiron 6400 Notebook

After press push buttom , power not on , fan not on ... as dead


It might be the power supply that is dead or motherboard or together. 1. Try to disconnect all the connection at the back of your computer\015\012tower then press the power button of your computer for 15 seconds to\015\012drain the remain ... Dell Dimension 1100 PC Desktop

Does not power up


It's a dreadful way to start a day - you press the power button on your computer and nothing happens. Do not fear because all may not be lost! Follow these simple steps to determine why your computer won't turn on. Note: It is very import ... IBM ThinkPad T22 2647 Notebook

My computer keeps rebooting itself.


After doing what sandrew mentions in the previous post, and still getting the same problem, try resetting the BIOS (there should be a small jumper with three positions on it and a cap on two of them, close to the CMOS battery. you have to m ... E-Machines eMachines Desktop PC

It is stuck in power saver mode tried every thing can not get in come back up. Tried turning off and on, unpluged and pluged back in, put in cd, tried starting in safe mode with F8 key.


Possible that it's caused by a faulty hardware 1. Remove all the connection at the back of your computer2. Power cycle your computer tower by pressing the power button for 15 seconds3.\015\012Plug the power cord back in and mo ... Acer Aspire AM5641-U5520A PC Desktop

Replaced time/date button battery now not powering up although all indicators show power


You can try the following steps I created.1. Try to disconnect all the connection at the back of your computer\015\012tower then press the power button of your computer for 15 seconds to\015\012drain the remaining power.2. Rec ... Fujitsu Siemens Celsius 670 (LKN:SWD-670115-031) PC Desktop

System is not booting but only fan runs very fast & noisy


Try the following steps I'm doing to fix such problem like that or maybe pin point the root cause of the problem or the reason it happened. 1. Try to disconnect all the connection at the back of your computer\015\012tower then press the p ... Lenovo ThinkCentre® A51 PC Desktop

My Dell optiplex 170L keeps turining off and then


Possible that it's caused by a faulty hardware or a computer virus on your computer. For us to isolate the issue we must start troubleshooting with the hardware1. Remove all the connection at the back of your computer2. Power cycle ... Dell OptiPlex 170L PC Desktop

Blue Screen Horror.


By the way thanks for the info on the 98 Neon, Thank You you have been a big help. Now it is my time, I have lots of expertise on vehicles, I have been working on them since I was fifteen and I am 41 now so there is very little if anything that I hav ... Compaq Evo N620c Notebook

My Emachines Desktop W5243 works sometimes and others just beeps


You might be having a minor dust particle situation going on. Take the memory out of the system. Get a can of air and blow out the slots on the motherboard where the memory would normally go. Then take the can of air and blow the connectors on bot ... E-Machines eMachines Desktop PC

Dell Lattitude D600 Laptop (Secondary Hardrive not found)


Do this in the order :\015\012\015\012Turn the laptop off\015\012\015\0121) Remove the CDROM/DVDROM or combo drive from the Laptop\015\012\015\0122) Turn on the Laptop go to bios setup and save the setting\01 ... Dell Latitude D600 Notebook

My computer spontaneously goes into power save mode


I just had this problem exactly and it ended up being the memory card slot....which in turn means the whole motherboard. I went thru tech support and luckily my computer was still under warranty. You can check if it is this by unplugging computer, ... IBM IntelliStation M Pro 6219 PC Desktop

Computer won't boot up. Could hear a grinding noise on the top left side (opposite side of the HDD). Took the bottom cover off and reconnected the battery and power. The fan (assume it's the processor fan) isn't turning. Is it supposed to be turning 100% of the time? Can the fan be replaced?


Hi,You can try the following steps:1. Unplug the power from the laptop and remove the battery then press the power button of the laptop for 15 seconds2. Put the battery back in, turn on the laptop without plugging ... PC Laptops

BIOS Beeps Hiya i had the three bios beeps, and i removed and reinserted the memory as you said online. There is no longer any beeps, but now there is no screen appearing :S So what do i do now???? Cheers, Tom (Reply to : [email protected])


Hey there Tom! Sorry for the slow response, but have had too many irons in the fire at the same time, as of late.Sounds like you may have a case of , what I call "RIC" (Repair Induced Confusion). Nothing to be ashamed of. We all experi ... Lenovo 3000 N200 T7100 1.8G 1GB 160GB SYSTDVDRW 15.4-WXGA WL BFP XPP PC Notebook

Computer has frozen on windows logo


1) Which version of Windows ? For the following discussion I am assuming it is 2000, XP or higher. You may also want to print this, it's long.2) Is this this the low resolution Windows logo on the black scre ... Fujitsu Siemens SCALEO 600 (FSP:83C005617) PC Desktop

Dell Precision 340 will not boot past the bios


It is possible that one of the drives are causing the proble. Disconnect all drives Hard drives, CD, DVD, BLUERAY,Floppy etx and turn the system on if it boots then shut it down and connect the drives one at a time until you find the one at fault.. I ... Dell Precision 340 PC Desktop

CPU overheating I was wondering if anyone knew about any cpu overheating problems with the gateway MT3422. I have read several articles on this issue, and wonder if this may be my problem. I noticed that the laptop does get really hot, even with a cooling unit underneath it. The computer is now not wanting to turn on after restarting due to recent updates. I get a power light on after pushing the button a few times, no other lights are on, the CPU fans does turn on and the cd rom does spin. F 12


If you don't get anything on the monitor thats not a overheating problem, it could have been a overheating problem that has already damaged the machine.Since your not getting any picture I would try the laptop with a external monitor, if ... PC Laptops

Emachines w3609 My emachine w3609 was working fine one night and when I turned it on the next morning, it would turn on but my monitor said no signal and it wouldn't do anything. I got online with tech support and they said to reseat the ram, which I did, still no go. Then they said I would have to buy new memory which I did, a kit of 2 x 1 GB of ram. I put it in and still nothing for a total of 12 times. Then they told me my motherboard ram slots were dead, and I would have to get a new motherb


Hey iluvyakatu\015\012\015\012 Does your emachine has inbuild video card or AGP or PCI card? if one it has AGP or PCI card try to reseat it. If it is inbuild try to use AGP card or PCI card and see what happen. Also try to check whether ... E-Machines eMachines Desktop PC
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.1231 seconds