Having problems with your E-Machines eMachines Monitor E15T4 ?

I AM TRYING TO MAKE MY EMACHINES LIKE NEW HOW CAN I DO THAT


Answers :

Backup your data files (and E-mail) to an external disk-drive.
\015\012Take the "System Restore" CD-ROMs that came with your computer, and reinstall Windows.
\015\012
\015\012If you have lost those disks, contact 'www.eMachines.com', and order a replacement set of "System Restore" CD-ROMs.
\015\012
\015\012Restore your files from your backup.
If you have the restore cd's or DVD which came with your system. follow their instructions. and that will make it like new \015\012BEWARE! If you use these back up anything you want to keep FIRST!!!... Restoring a system using the restore options WILL WIPE OUT ALL YOUR DATA!!..
Repair Help & Product Troubleshooting for E-Machines eMachines Monitor E15T4

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

T2893 desktop did not power on when I hit the power button


If you can find someone that has the same model, that is the best way to make sure it fits. Some other motherboards will fit, but you may have to do some work to get them to fit. The best way would be to try to do some research on your particul ... E-Machines eMachines T3830 PC Desktop

Emachine beeps Hey, we just got a new emachine and we have the same problem! We got it mid/end of April but were in the process of moving so it stayed in the box till about a week ago. I hooked it up and when you press the on button it beeps 5 times then you hear the fan kick on like its thinking about starting up but then it just stops and beeps until you turn it off. The monitor says no signal and then goes blank. Any advise?


That would be a problem for e-machine. The beeps are codes. I will try to help, but it is hard to diagnose without looking at it.You can try several things. Open it up and make sure that everything is seated inside. Make sure the memo ... PC Desktops

Cpu upgrade , please help


Tech-gu818, When looking to see what processors a computer will support, try to find out what motherboard chipset is on the motherboard, and the processor socket.The motherboard chipset is the;1) Northbridge chip2) ... E-Machines eMachines Desktop PC

New ram cards to upgrade, now won't run windows


Ok,I looked up the specs on this pc. It's kinda old & it says it comes with windows me installed,but apparently some come with or are upgraded to xp. Go into bios setup,usually f1 or delete,should say during post. On the first page in bios see if ... PC Desktops

EMachine will not turn on.


Sounds like the power supply is faulty. Power supplies are very dangerous to try and repair, even for qualified technicians. I would also suggest not trying to plug it in or turn it on until the new power supply is in place. Faulty power supplies ... E-Machines eMachines Desktop PC

Replaced Mainboard on Emachine w3653, keeps restarting


If it reboots before you make the Windows load screen, chances are it's the power supply. You can go into the BIOS, look at the power setup and with most BIOS's you can watch the DC supplies. If they vary like mad while you're doing this (with the PC ... E-Machines eMachines Desktop PC

Computer won't boot after adding ram


It could be one of the following:\015\0121. You fried the motherboard when you replaced the RAM. This is the worst case scenario, but it does happen. In any case, don't replace your PC yet!\015\0122. Your system was off too long, and the ... E-Machines eMachines Desktop PC

When i turn on my emachines 420 at the mains, the led power light comes on, but it wont do anything else including turning on or off


Hello there,this sounds like a problem with your power supply unit inside the computer,emachines are always blowing there power supply because the one that comes with the computer just is not powerful enough.If you are confident enough around electri ... E-Machines eMachines Desktop PC

E-Machine T2893 keeps restarting after rest=ore


I don't think the problem is with the motherboard. It's likely that you have a corrupt Windows installation and that reinstalling Windows will fix it. Unfortunately reinstalling Windows will also erase any data you have on your hard drive. Do you hav ... E-Machines T2893 PC Desktop

Can't set up network w linksys modem


Video card:Your computer has an integrated video card but has a "PCI Express" expansion slot for an upgrade. After the upgrade you will be able to play most games without the choppy frame rate...depending on what card you buy. Since ... PC Desktops

Missing NTLDR file


The first thing to do is try to change back whatever hardware or software change you just made (this could be as simple as leaving a floppy disk in the drive or you need to reseat the IDE cables). If the contents of the drive are especially important ... ASUS Eee PC 2G Surf Notebook

Emachine T2385 Won't Boot in Normal Mode past Windows XP Screen


The first thing I would check is your video card (usually driver) problem. Start windows in safemode with networking. If this problem has occured after updating the video card driver you may try rolling back the driver to a previous version, otherw ... E-Machines Celeron 2.3GHz (rb-t2385)

Menu/screen resolution/contrast box keeps popping up on screen.


By what your describing, the board in the monitor that allows you to make changes to the display is going bad (sounds like the settings button). If it were a notebook you might be able to get a board replacement (just an example I know notbooks dont ... E-Machines eMachines Desktop PC

T2542 Emachine Is there anyway I can a schematic that shows me how to start troubleshooting the power supply. I turned everything off and unplugged it replaced the power supply with a new one and get a yellow light. The fan came on for a good 3 to 4 seconds but then turned off. any suggestions


It's hard to troubleshoot a power supply. They are very dangerous and contain electricity for some time after turned off. If your new one isn't solving your problem it makes me think it's not the power supply unless it's not powerful eno ... E-Machines eMachines Desktop PC

Hi guys,I have a linksys router hooked up and my desktop connection is fine. My laptop however, tells me my connectivity is limited, despite an excellent signal


Go to your desktop and login to the router, the manual should have the default ip and username/password, or google that info, once your in check the number of dhcp leases and make sure it is set to about 2 more than the number of PC's you have, I hav ... PC Desktops

Computer in black screen, no energy outputted


A few possibilities(the only problem is if you never get any display to try many of these suggestions):\015\012\015\012-Suspend. With suspend, everything is put to RAM and the computer goes to low power state, shutting off USB, HD, and most other thi ... E-Machines eMachines T3830 PC Desktop

My Samsung LCD TV/Computer Monitor just went deadOnly 14pins/15


It sounds to me like the monitor/TV needs to either be replaced or sent in for repair but there are a few things we can test. \015\012\015\012The first thing would be to set the TV to connect a cable line to the TV and see if you can get ... Samsung SyncMaster 204B 20.1" LCD Monitor

My gateway g7-500 fails to start properly. Whemn power on I get a long beep followed by 2 short ones and the monitor screen remains black.


Cause:This issue can be caused by any of the below situations.\015\012 \015\012\015\012New hardware conflicting with old hardware.\015\012Bad or failing hardware device.\015\012 ... PC Desktops

HP Pavillion dv9005us screen stays dark


Lets start with the power, make sure it is charging by looking at the ring on the side that lights up when the power cable is plugged in. If this is on, then make sure the light on the front of the laptop is on. If it is charging and it is detecing p ... HP Pavilion dv9005us Notebook

Bad power supply, installed new one, get green light on mother board; but doesn't boot up. Bad start up button?


Yes, it is my belief that it is the Power On button. To test this, there is a simple solution. I however, would like to caution you at this point.You will have the power supply plugged in. There will be a small spark. I wouldn't advise how to t ... PC Desktops

I recently moved my computer into my new condo and have not been able to use it since. The problem seems to be with the monitor. I turn on the computer and the fan comes on but the monitor displays "no signal" and then goes dark but the light one the front still flashes indicating it is getting power. The last time I moved my computer from one room to another, the monitor suddenly couldn't/wouldn't display colors accruately - no red. Attempt to adjust the color by using the monitor's controls we


Lack of video signal is usually 1 of 3 things, Power supply (PSU), Video card or Motherboard (mobo).Situation #1: If you get a blank screen and no sounds or movement it either indicates that the power supply unit (PSU) has failed or somet ... E-Machines eMachines Desktop PC

Cant get it to turn on/ panasonic CF-51 toughbook laptop.


Here are some troubleshooting hints, see if these will work for you. It is hard to knnow what to do in these situations because there is no way of telling what key combinations etc. were hit.\015\012\015\012 ... Panasonic Toughbook CF-51 Notebook

My on button just blinks on and off but when I push it to turn it on..nothing happens..its like it isnt getting any connection


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... Acer Aspire 5520-5908 Notebook

Dell latitude d500 had a power socket problem, but now resolved pc will not boot-up, drive spins-up, then nothing, completely dead display i think most likely scenario is mobo is fried, but open to suggestions how tio get this working again


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... Dell Latitude D500 Notebook

There is humming sound coming from the computer and the green light below the power buttom is flashing.


Is the hum coming from the computer/case itself or the speakers? This seriously determines how you go about diagnosing the problem. If it's coming out of the speakers then it comes down to:Checking for solid sound card connection (if separate) ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9129 seconds